330193-00-03-05-CN Bently Nevada 3300 XL 8mm Probe – Short 0.5m Cable

330193-00-03-05-CN – Bently Nevada 3300 XL 8 mm Probe, M10 x 1, No Armor

Genuine Bently Nevada 3300 XL 8 mm proximity probe. Short 0.5 meter cable, compact case design.
M10 x 1 thread, no armor, country-specific approvals. Works from -52°C to +177°C.
Ships in 12-24 hours via FedEx, UPS, DHL.

🔍 Model Breakdown – Suffix Tree

• 330193 — Base: 3300 XL 8 mm Probe, M10 x 1 thread, without armor
  • │
    • -00 — Length configuration (0 mm threaded tip)
      • └─ No threaded tip extension. Max unthreaded: 230 mm
      • └─ Min unthreaded: 0 mm. Compact mounting.
    • -03 — Overall case length (30 mm)
      • └─ Very short case: 30 mm. Ideal for tight spaces.
    • -05 — Total cable length (0.5 meter / 1.6 feet)
      • └─ Short cable, no armor. Flexible for near-rack mounting.
    • -CN — Country-specific agency approval
      • └─ Meets local certification requirements.
  • └─ Complete part meaning: 8mm probe | 0mm thread | 30mm case | 0.5m cable | country-specific approval

📊 Technical Specifications

• ▸ General Info
  • – Brand: Bently Nevada
  • – Series: 3300 XL
  • – Model: 330193-00-03-05-CN
  • – Type: 8 mm proximity probe, M10x1 thread, no armor
  • – Origin: USA
• ▸ Electrical Performance
  • – Linear range: 2 mm (80 mils)
  • – Sensitivity: 7.87 V/mm (200 mV/mil)
  • – Resolution: sub-micron
  • – Frequency response: DC to 10 kHz
  • – Linearity: ±0.2% of full scale
  • – DC resistance (0.5m cable): 7.45 Ω ±0.50
• ▸ Mechanical Dimensions
  • – Case thread: M10 x 1
  • – Max thread engagement: 15 mm
  • – Overall case length: 30 mm (short)
  • – Threaded tip length: 0 mm
  • – Total cable length: 0.5 meter (1.6 ft)
  • – Tip material: Polyphenylene sulfide (PPS)
  • – Case material: AISI 303/304 stainless steel
• ▸ Environmental Limits
  • – Operating temp: -52°C to +177°C (-62°F to +350°F)
  • – Extended tip temp: up to +218°C (+425°F)
  • – Humidity: <3% shift after 56 days at 93% RH
  • – Pressure seal: Viton® O-ring
  • – 60 Hz magnetic field immunity: low output interference (see data)

✅ Hazardous Area Approvals

• ✔ Intrinsically Safe (ia)
  • – With zener barriers (dwg 141092) or galvanic isolators
  • – Class I, Zone 0: AEx/Ex ia IIC T5…T1 Ga
  • – Class I, Groups A,B,C,D; Class II, Groups E,F,G; Class III
• ✔ Non-incendive (nA, ec)
  • – Per drawing 140979, nonincendive circuit
  • – Class I, Zone 2: AEx/Ex nA IIC T5…T1 Gc & ec IIC T5…T1 Gc
  • – Class I, Division 2, Groups A, B, C, D
• 📊 Temperature Class (Probe only)
  • – T1: -55°C to +232°C | T2: -55°C to +177°C
  • – T3: -55°C to +120°C | T4: -55°C to +80°C | T5: -55°C to +40°C

🔧 Install & Compatibility

• ▸ Mounting tips
  • – Use M10 x 1 threaded hole. Do not overtighten.
  • – Set air gap between 0.5 mm and 2.0 mm for best linear range.
  • – Keep cable away from sharp edges.
• ▸ Works with
  • – Bently Nevada 3300 XL proximitors, 3500 racks, 1900/2300 monitors
  • – Use genuine extension cables for full performance:
    • • 330190-045-02-CN (extended temp range)
    • • 330190-070-00-00 (standard cable)
• ▸ Compare models
  • – This probe (330193-00-03-05-CN) suits tight spaces with 0.5m cable.
  • – For longer reach, choose 330190-045-02-CN or 330190-070-00-00 extensions.

🏭 Where to Use – Ideal Machines

• – Small steam turbines & gas turbines
• – High-speed compressors with limited mounting depth
• – Motors, generators, and pumps in compact layouts
• – Test stands and portable monitoring setups
• – Hazardous areas Zone 0, Zone 2 with barriers

🎯 Manager’s Insight – Smart Choice for Tight Spaces

“The 330193-00-03-05-CN is ideal when mounting space is limited. The 30 mm case and 0 mm threaded tip allow installation in shallow housings.
Short 0.5m cable reduces signal loss and simplifies wiring. Country-specific approval (-CN) ensures compliance in local markets.
Perfect for retrofitting old machinery where space is a premium.”

❓ Frequently Asked Questions

• Q: What does the -CN suffix mean exactly?
  A: -CN stands for country-specific agency approval. It meets local certification rules. Contact us to confirm your region.
• Q: Can I use this probe with a longer extension cable?
  A: Yes. Use Bently Nevada extension cables like 330190-045-02-CN or 330190-070-00-00 to reach your monitor.
• Q: How do I check if the probe is working?
  A: Measure DC resistance between center and outer conductor. For 0.5m cable, reading should be 7.45 Ω ±0.50. Also inspect tip for damage.
• Q: What is the warranty and shipping time?
  A: 12 months warranty. We ship within 12-24 hours after order. Carriers: FedEx, UPS, DHL.
• Q: Why choose the 0.5m cable version?
  A: Short cable is perfect when the proximitor is near the probe. It reduces cable clutter and cost. Ideal for small machines or test setups.

📦 Selection Guide & Logistics

• Included: 1 x 3300 XL 8mm Probe, protective cap, manual
• Warranty: 12 months from invoice date
• Shipping: 12-24 hours dispatch via FedEx, UPS, DHL with tracking
• When to pick this model: Use 330193-00-03-05-CN if you need compact case (30mm) and very short cable. For longer cable needs, add extension cables above.