330192-00-10-50-05 Bently Nevada 8mm Proximity Probe – Armored

330192-00-10-50-05 – Bently Nevada 3300 XL 8 mm Armored Probe

Made in USA · 12 months warranty · 12‑24h ship (FedEx/UPS/DHL) · New factory sealed

Industrial eddy current probe with flexible stainless steel armor. TipLoc and CableLoc provide 330 N pull strength. Designed for 5 m Proximitor systems. Ideal for vibration, position, and eccentricity monitoring in hazardous areas.

📦 Ordering code tree – 330192

• 330192 – 3300 XL 8 mm ETR probe, 3/8-24 UNF thread, with armor
  • ├─ -00 – Minimum unthreaded length: 0.0 inch (must be ≤ case length -0.8″)
  • ├─ -10 – Overall case length: 1.0 inch
  • ├─ -50 – Total probe length: 5.0 meters (16.4 ft) – for use with 5 m Proximitor only
  • └─ -05 – Agency approval: CSA, ATEX, IECEx (international hazardous locations)

⚙️ Technical specifications – by category

• Brand & series – Bently Nevada / 3300 XL 8 mm armored
• Electrical
  • Nominal DC resistance (5.0 m probe): 8.73 Ω ±0.50
  • Sensitivity: ≤2 mV change per volt input change
  • Output resistance: 50 Ω
  • Supply: -17.5 to -26 Vdc (12 mA max)
  • Important: 5 m probe works only with 5 m Proximitor sensor
• Mechanical
  • Tip: Polyphenylene sulfide (PPS) – thick encapsulation
  • Case: AISI 303/304 stainless steel
  • Armor: Flexible AISI 302/304 SST with FEP jacket
  • Thread: 3/8-24 UNF, max engagement 0.563 inch
  • Pull strength: 330 N (75 lbf) case to lead; 270 N at connectors
  • Connector: gold‑plated brass/BeCu, torque 0.565 N·m (5 in·lbf)
• Environmental
  • Temperature range (standard): -52°C to +177°C
  • Extended temp option (tip/cable): -52°C to +218°C / +260°C
  • Humidity: <3% ASF change after 56 days at 93% (IEC 68-2-3)
  • Sealing: Viton® O‑ring (differential pressure, not factory tested)
  • Note: Below -34°C, pressure seal may fail prematurely
• Hazardous area approvals (-05)
  • With barriers (dwg 141092) : Class I, Zone 0 AEx/Ex ia IIC T5…T1 Ga
  • With nonincendive circuit (dwg 140979) : Class I, Zone 2 AEx/Ex nA IIC T5…T1 Gc
  • Suitable for Class I Div 2, Groups A,B,C,D; Class II/III
  • Temperature schedules: T1 (≤232°C) to T5 (≤40°C)
  • Certifications: CSA, ATEX, IECEx

🔧 Installation & maintenance – key points

• Mounting rules
  • Thread engagement max 0.563 in – use torque wrench
  • Unthreaded length 0.0″ ensures case length ≥1.0″ per rule
  • Always use backup wrench on hex; never pull cable
• 5 m system special note
  • This 5 m probe must connect to a 5 m Proximitor only
  • Do not use with other Proximitor lengths – mismatch will affect calibration
• Armor & cable care
  • Armor is flexible SST – avoid sharp bends during routing
  • Connector torque: 0.565 N·m only – gold plating is soft
  • Support cable near machine to reduce vibration stress
• Pressure seal caution
  • Viton O‑ring seals differential pressure – not factory tested
  • If tested seal required, contact custom design department
  • Avoid temperatures below -34°C to protect seal integrity

🔄 Compatibility & certification tree

• Compatible systems
  • Bently Nevada 3300, 3500 monitors with 5 m Proximitor
  • Not compatible with other Proximitor lengths
  • Third‑party conditioners only if matched to 5 m probe
• Hazardous area (-05)
  • CSA, ATEX, IECEx certified for international use
  • Install per drawing 141092 (intrinsic safety) or 140979 (nonincendive)
  • Temperature class depends on ambient: T1 to T5

📦 Package & logistics

• Includes: 1x Bently Nevada 330192-00-10-50-05 probe (factory sealed)
• Warranty: 12 months from shipment (parts & workmanship)
• Dispatch: Same business day / 12‑24 hours
• Couriers: FedEx, UPS, DHL – tracked & insured worldwide

👨‍🔬 Manager’s insight – why 330192-00-10-50-05?

This 5 m armored probe is a specialized tool for installations using the 5 m Proximitor. The combination of ATEX/IECEx approval and stainless steel armor makes it ideal for high-risk areas like offshore platforms and chemical plants. The 1.0″ case length fits standard bearing housings. We recommend this when you need both hazardous location certification and mechanical protection. Remember: this probe only works with 5 m Proximitors – check your system before ordering.

🔗 Compare with standard extension cables

• This probe: 330192-00-10-50-05 (5 m armored, ATEX/IECEx, for 5 m Proximitor)
• If you need standard extension cables for other lengths:
  • 330190-070-00-05 – 7.0 m standard extension cable (ATEX/IECEx)
  • 330190-070-00-CN – 7.0 m standard extension cable (Country Specific)
• Selection tip: Use this 5 m probe only with matching Proximitor. For other lengths, choose appropriate probe or extension cable.

❓ Frequently asked questions – field guide

• Q: Can I use this 5 m probe with a 7 m Proximitor?A: No – this probe is designed only for 5 m Proximitor sensors. Mismatch will cause incorrect readings.
• Q: What does the -05 approval cover? Is it worldwide?A: Yes – CSA (North America), ATEX (Europe), IECEx (international). Suitable for Zone 0/1/2 and Division 2.
• Q: The case length is 1.0 inch. Can it fit in a 25 mm hole?A: Yes – 1.0 inch ≈ 25.4 mm. Ensure thread engagement does not exceed 0.563 inch (14.3 mm).
• Q: How do I know if I need extended temperature range?A: If process temperature exceeds 177°C, choose extended temp option. Standard probe handles up to 177°C.
• Q: What if my application requires a pressure-tested seal?A: Standard probes are not pressure tested. Contact sales@powergearx.com for custom tested units.

🏭 Applications & compatible devices

• Machinery: Steam turbines, centrifugal compressors, gearboxes, pumps, fans, hydro turbines
• Measurements: Radial vibration, axial thrust, eccentricity, speed/phase
• Ideal for: Refineries, chemical plants, offshore, pipelines – areas needing armor & ATEX/IECEx certs
• Monitors: Bently Nevada 3500/3300/1900 with 5 m Proximitor only

📬 Inquiries: sales@powergearx.com | +86 18030005825 (WhatsApp)
We help with Proximitor matching, custom pressure testing, and Ex barrier drawings.

Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/