330192-00-08-30-00 Bently Nevada 3300 XL 8mm Armored Probe | 3m ETR Sensor

330192-00-08-30-00 – Bently Nevada 3300 XL 8mm Armored Proximity Probe

• Premium 3300 5mm Proximity Probes series, now with integral armor for extreme mechanical protection.
• Designed for harsh environments: flexible AISI 302/304 stainless steel armor with FEP outer jacket.
• Patented TipLoc & CableLoc construction ensures 330 N (75 lbf) pull strength.
• 12 months factory warranty & 12‑24h dispatch via FedEx, UPS, DHL.
• Contact: sales@powergearx.com | +86 18030005825 (WhatsApp).

📦 Ordering Code Tree – Suffix Breakdown

• 330192 : 3300 XL 8 mm ETR Probe, 3/8-24 UNF thread, with armor.
  • -00 : Unthreaded length = 0.0 inch (minimum).
    (Must be at least 0.8″ less than case length.)
  • -08 : Overall case length = 0.8 inch (option 08).
  • -30 : Total probe length = 3.0 meters (9.8 ft).
  • -00 : Agency approval = not required (standard industrial).
• Country of origin : Made in U.S.A.

🔧 Core Technical Data – MECE Format

• Electrical
  • Nominal DC resistance (RPROBE) : 8.17 Ω ±0.50 Ω (center to outer conductor).
  • Supply : -17.5 to -26 Vdc (12 mA max).
  • Sensitivity : < 2 mV change per volt change.
  • Output resistance : 50 Ω.
• Mechanical & materials
  • Probe tip : Polyphenylene sulfide (PPS) – thick molded encapsulation.
  • Case : AISI 303/304 stainless steel.
  • Armor : Flexible AISI 302/304 SST with FEP outer jacket.
  • Thread : 3/8-24 UNF; max engagement 0.563 inch.
• Environmental
  • Humidity : < 3% ASF change after 56 days @ 93% RH (IEC 68-2-3).
  • Pressure seal : Viton® O‑ring (differential pressure, not tested).
  • Temperature range (standard probe) : -52°C to +177°C.
  • Extended range (tip) : -52°C to +218°C; cable/connector to +260°C.
  • Caution : Below –34°C may damage pressure seal prematurely.
• Hazardous area approvals
  • ia (with barriers per dwg 141092) : Class I, Zone 0 AEx/Ex ia IIC T5…T1 Ga; Groups A,B,C,D,E,F,G.
  • nA / ec (nonincendive per dwg 140979) : Class I, Zone 2 AEx/Ex nA/ec IIC T5…T1 Gc; Div 2 Groups A,B,C,D.
  • Temperature schedules for EPL Ga/Gc/Dc – see full table (T1‑T5).

🛠️ Installation & Maintenance Highlights

• Screw directly into 3/8-24 UNF tapped hole; observe 0.563″ max thread engagement.
• Viton O‑ring provides built-in pressure sealing – no additional sealant.
• Armor protects cable against abrasion & crush – ideal for retrofit into tight conduit.
• Gold-plated connectors (max torque 0.565 N·m / 5 in·lbf).
• No field calibration needed when used with matching 3300 XL Proximitor.

🔄 Compatibility & System Match

• Works exclusively with Bently Nevada 3300 XL Proximitor (same length – 3 m).
• Compatible with all 3300 XL extension cables (75 Ω triax).
• Use with 3500/1900 monitors via correct Proximitor.
• Comparison & selection guide
  • 330190-085-01-CN (ETR extension cable, CN option) – for extending existing probes.
  • 330190-030-00-00 (3m ETR extension cable) – when you need extra length without armor.
  • This 330192-00-08-30-00 is the armored 3m probe – best for high‑abrasion areas (pulp, paper, mining).

📋 Package & Delivery

• 1x 5mm Proximity Probes (330192-00-08-30-00) in sealed factory packaging.
• Inspection certificate included.
• 12‑month warranty against defects.
• 12‑24 hour shipping – FedEx / UPS / DHL (tracking provided).

👨‍🔧 Expert Review & Manager’s Insight

• “The built-in armor makes this probe the first choice for high‑wear locations – it survives where standard cables fail.”
• “We often recommend the 330192 for reciprocating compressors and outdoor fans; the stainless steel jacket prevents rodent damage and accidental cuts.”
• “With ia approval up to Zone 0, it’s also a safe bet for chemical plants when paired with the correct barrier.”
• “The 3‑meter length is perfect when junction boxes are close to the machine – no extra extension cable needed.”

❓ Frequently Asked Questions – Selection & Experience

• What does the “with armor” option actually protect against?It adds a flexible stainless steel braid over the cable. This prevents crushing, cutting, and chewing by pests – common in paper mills and mines.
• Can I use this 3 m probe with a 5 m Proximitor?No. Lengths must match exactly (3 m probe + 3 m Proximitor). Mismatched lengths cause linearity errors and may trip machinery.
• I see the pressure seal is not tested. Should I test it myself?For standard applications, the Viton O‑ring seals reliably. If your machine has high differential pressure (>50 psi) or you need a certificate, contact our custom department for a tested version.
• Which approval do I need for a Class I, Division 2 area?Use the nA/ec nonincendive installation (drawing 140979). This probe carries that approval out of the box – just follow the wiring diagram.
• Is there a minimum order quantity? And how fast can you ship?No MOQ – single piece available. We ship within 12‑24 hours worldwide via FedEx, UPS, or DHL. Stock is ready in our Texas and Shanghai hubs.

🔗 Copyright & Original Source

• Original Source: https://www.powergearx.com/
• Copyright © 2026 Powergear X Automation Limited. All rights reserved.