EVF9336-EVV030 Frekvenční měnič Lenze 9300 Vector Drive 250 A 132 kW

EVF9336-EVV030 | Lenze 9300 Vector Series | 132 kW Three-Phase Frequency Inverter

Jedno EVF9336-EVV030 je třífázový frekvenční měnič od Vektor Lenze 9300 série. The EVV030 variant ships with an integrated RFI filter (limit class A) and delivers 150% overload capacity. It suits demanding industrial drive tasks. This unit supports U/f control, vector control, and sensorless speed control. It runs a 132 kW four-pole asynchronous motor on a 3 AC 400 V supply.

This drive is a legacy Lenze product. Lenze lists a migration path to the i950 series. There is no drop-in replacement with the same order code. Plan a migration project if you need long-term spares continuity.

Klíčové výhody

• Vysoká hustota výkonu. 132 kW rated motor power in a single cabinet unit.
• Strong overload. 375 A maximum output current for 60 s.
• Flexible control. U/f linear, U/f square, vector, and sensorless speed control modes.
• Integrovaný EMC filtr. RFI filter class A is built in on the EVV030 variant.
• Fieldbus ready. Pluggable AIF module slot and onboard CAN system bus.
• Široký frekvenční rozsah. Output up to 600 Hz, depending on chopper frequency.

Technické specifikace

• Značka: Lenze
• Model: EVF9336-EVV030
• Série: 9300 vektor
• varianta: EVV030 (integrated RFI filter, limit class A)
• Jmenovitý výkon motoru: 132 kW (4-pólový asynchronní motor, 3x AC 400 V)
• Výstupní proud: 250 A jmenovitý proud při frekvenci střídače 2 kHz
• Max. výstupní proud: 375 A po dobu 60 s
• Přetížení: 150 % jmenovitého točivého momentu po dobu 60 s
• Ztráta moci: 3.3 kW
• Frekvence měniče: Adjustable 1, 2, or 4 kHz
• Režimy ovládání: U/f characteristic (linear/square), vector control, sensorless speed control
• Rozsah výstupního kmitočtu: 0–600 Hz max at 16 kHz chopping; 0–300 Hz max at 8 kHz; 0–150 Hz at 2 kHz; 0–150 Hz at 4 kHz for sizes 9321–9333
• Napájecí napětí: 3/PE AC 340–456 V nominal, 45–65 Hz
• Napájení stejnosměrným proudem: Not possible (per official product information for 110–400 kW)
• Chlazení: Vnitřní ventilátor, proudění vzduchu zdola nahoru
• Provozní teplota: 0 až +50 ° C
• Skladovací teplota: -20 až + 60 ° C
• Relativní vlhkost: Humidity class F, non-condensing (no specific %RH published)
• Hodnocení ochrany: IP20
• Rozměry (V × Š × H): 1145 x 500 x 436 mm
• Hmotnost: 175 kg

Komunikace a kompatibilita

• Vestavěné porty: Automatizační rozhraní AIF (X1) pro zásuvný modul sběrnice Fieldbus; systémová sběrnice CAN (X4)
• Onboard protocols: Systémová sběrnice CAN
• Fieldbus options via AIF: LECOM-A/B, PROFIBUS DP, CANopen, DeviceNet, INTERBUS, LON (per official Lenze product information)
• Standardní sběrnice: None integrated as standard; module plugs into X1 AIF interface
• Poznámka k migraci: Lenze lists 9300 within the i950 migration set (8200 vector, 9300, 8400, 9400) via i950 PROFIBUS module and L_ICIP library. No same-order-code drop-in replacement.

Instalační příručka

• Mount the unit vertically. Keep the airflow path clear from bottom to top.
• Respect the IP20 rating. Install inside a suitable enclosure in dusty or wet areas.
• Use the 1145 × 500 × 436 mm footprint for cabinet planning. Allow space for cable bend radius and heat dissipation.
• Feed the drive from a 3/PE AC 340–456 V, 45–65 Hz supply. Do not attempt DC supply.
• Wire the motor for 132 kW at 3 AC 400 V. Match cable cross-section to the 250 A nominal output current.
• Tighten power terminals to Lenze torque specs. Loose terminals cause heating and nuisance trips.
• Ground the enclosure properly. The integrated class A RFI filter needs a solid PE bond.
• Keep control wiring away from motor cables. Use shielded cable for encoder and system bus lines.

Uvedení do provozu a údržba

• Set the chopper frequency to match your application. Lower frequency gives more output current; higher frequency reduces motor noise.
• Enter motor nameplate data during commissioning. Vector mode needs correct motor parameters.
• Run the auto-tune routine if available. This improves sensorless speed control accuracy.
• Check fan operation at startup. The internal fan is the main cooling path.
• Clean the heatsink and fan intake on a scheduled basis. Dust buildup raises internal temperature.
• Review fault logs after any trip. The drive stores diagnostic codes for fast troubleshooting.
• Replace the fan at end of life. Overheating shortens capacitor life.

Certifikace a shoda

• EMC: Integrated RFI filter, limit class A (EVV030 variant).
• Ochrana: IP20 dle oficiálních informací o produktu.
• Humidity class: F, non-condensing.
• Stav životního cyklu: Legacy product. Official Lenze product information lists this order code. Superseded by newer drive generations.

Balicí seznam a záruka

• 1 × frekvenční měnič Lenze EVF9336-EVV030
• 1 × sada oficiální dokumentace k produktu
• Záruka: 12 měsíců
• Odeslání: Odeslání do 12–24 hodin po potvrzení objednávky
• Nosiče: FedEx, UPS, DHL

Odborné hodnocení

Jedno EVF9336-EVV030 earns respect for its overload headroom. A 132 kW drive with 375 A for 60 s handles heavy starts and shock loads well. The integrated class A filter saves cabinet space and simplifies EMC planning. The AIF module slot keeps fieldbus options open without a hardware redesign. The main downside is lifecycle. Lenze has moved this series to legacy status, and no same-order-code replacement exists. Buyers should budget for an i950 migration in the medium term. For existing 9300 vector installations, this unit is a solid spare or replacement.

Manažerův pohled

We stock this model for plants that still run 9300 vector drives. The 132 kW / 250 A rating covers a large share of older process lines. Overload capacity and the integrated RFI filter are the two features customers ask about most. Lead time is short: we ship in 12–24 hours via FedEx, UPS, or DHL. If you need a long-term plan, ask us about the i950 migration path at sales@powergearx.com or + 86 18030005825.

Nejlepší aplikace pro přizpůsobení

• Pumps and fans with variable torque loads (U/f square mode).
• Conveyors and mixers that need high starting torque.
• Extruders and process lines running sensorless speed control.
• Retrofit projects replacing a failed 9300 vector drive.
• Machines with PROFIBUS DP, CANopen, or DeviceNet networks via the AIF module.

Nejčastější dotazy

• Is this a new or legacy product?
  It is legacy. Lenze lists this order code in official product information and marks it as superseded by newer drive generations.
• Can I get a drop-in replacement with the same order code?
  No. Lenze does not offer a same-order-code replacement. The official migration path goes to the i950 series.
• What fieldbus comes standard?
  Only the CAN system bus is onboard. Fieldbus modules such as PROFIBUS DP or CANopen plug into the X1 AIF interface.
• What is the overload capability?
  150% rated torque for 60 s, with a 375 A maximum output current for 60 s.
• Can I run this on a DC supply?
  No. Official Lenze information for 110–400 kW states DC supply is not possible.
• Jak rychle odesíláte?
  Objednávky jsou odesílány do 12–24 hodin prostřednictvím FedExu, UPS nebo DHL.
• Jakou záruku nabízíte?
  12 měsíců od dodání.
• Experienced buyer tip: which chopper frequency should I pick?
  Start at 2 kHz for rated 250 A output. Raise it only if motor noise is a problem and you can accept lower continuous current.
• Experienced buyer tip: what should I check before buying a spare?
  Match the order code and variant suffix. EVV030 includes the RFI filter; base EV units do not. Wrong variant means extra filter work in the cabinet.
• Experienced buyer tip: how do I plan the migration?
  Budget for a new drive, wiring review, and parameter porting. The i950 uses different tools, so allow engineering time.

Průvodce nákupem

• Confirm your motor rating is 132 kW at 3 AC 400 V, 4-pole.
• Check whether your cabinet design expects an integrated class A RFI filter. If yes, the EVV030 variant is the right one.
• Verify your network protocol. Choose the matching AIF fieldbus module at the same time.
• Measure your enclosure space. The unit is 1145 mm tall and 175 kg, so plan lifting gear and clearance.
• For long-term availability, ask about the i950 migration set before you commit to a large spare-parts stock.
• Kontakt sales@powergearx.com or + 86 18030005825 for stock checks and shipping quotes.

Autorská práva © 2026 Powergear X Automation Limited. Všechna práva vyhrazena.

Původní zdroj: https://www.powergearx.com/