Product details
TSXASY800 Schneider Electric TSX Micro Analog Output Module
The TSXASY800 is an analog output module from Schneider Electric. Moreover, it belongs to the TSX Micro PLCs series. This unit also fits the Modicon Premium Automation platform. In addition, it offers 8 analog output channels. As a result, it drives voltage and current loops with ease.
- Brand: Schneider Electric
- Series: TSX Micro PLCs
- Platform: Modicon Premium Automation
- Model: TSXASY800
- EAN: 3389110876369
- GTIN: 3389110876369
- Type: Analog output module
- Channels: 8 outputs
- Output type: Voltage or current
- Format: Standard module
Output Ranges And Resolution
- Voltage range: +/- 10 V
- Also: 0 to 10 V
- Resolution: 1.28 mV
- Current range: 0 to 20 mA
- Also: 4 to 20 mA
- Resolution: 2.56 µA
- Conversion: 13 bits + sign
- Current mode: 13 bits
Accuracy And Error Data
- At 25°C: 0.14% at +/- 10 V
- Current mode: 0.21% of full scale
- At 0 to 60°C: 0.28% at +/- 10 V
- Current mode: 0.52% of full scale
- Resolution: 12 bits
- Accuracy: +/- 0.1% of full scale
- Conversion time: 5 ms
- Response time: 1 ms per channel
Load And Signal Limits
- Current load: < 600 Ohm
- Minimum: 500 Ohm
- Voltage load: > 1000 Ohm
- Max inductance: 300 µH
- Max capacitance: 0.1 µF
- Output voltage limit: <= 30 V
Isolation And Protection
- Channel to bus: 1000 Vrms
- Channel to ground: 1000 Vrms
- Also: 500 V between channels and ground
- Channel isolation: Common point
- Guards: Short-circuit and overload protection
Power And Connection
- Power supply: 24 V DC
- Current draw: 200 mA at 5 V DC
- Also: 300 mA at 24 V DC
- Power use: 5 W
- Electrical connection: 1 SUB-D 25 connector
- Marking: CE
Environment And Protection
- Operating temperature: 0 to 60°C
- Storage temperature: -25 to 70°C
- Wider range: -40 to 85°C
- Relative humidity: 10 to 95% without condensation
- Storage: 5 to 95% without condensation
- Operating altitude: 0 to 2000 m
- Protective treatment: TC
- IP degree: IP20
- Pollution degree: 2
Standards And Certifications
- Standards: IEC 61131-2, UL 508, CSA C22.2
- Directives: 73/23/EEC, 89/336/EEC, 92/31/EEC, 93/68/EEC
- Hazardous areas: Class I Division 2 Groups A, B, C, D
- Certifications: BV, RINA, DNV, LR, ABS, RMRS, GL
- Country of origin: FR
Size And Packing
- Net weight: 0.46 kg
- US net weight: 1.01 lb
- Package 1 height: 5.5 cm
- Package 1 width: 18.0 cm
- Package 1 length: 26.0 cm
- Package weight: 465.0 g
- Packing units: 1 PCE
Expert Review
Plants that tune valves and drives often need clean analog signals. Because the TSXASY800 gives 8 channels, it cuts extra cards. In addition, the 13-bit plus sign design keeps steps small. When loops need both voltage and current, users pick the mode per channel. As a result, mixed cabinets feel simple. The 1000 Vrms isolation lowers noise risk. Therefore, this unit suits precise process work.
Manager’s Insight
Buyers often want one card for many control loops. The TSXASY800 covers that need. For example, it drives 0 to 20 mA and 4 to 20 mA loads. Besides that, it outputs +/- 10 V for drive references. The 5 W draw keeps heat low. Since the card uses a SUB-D 25 port, wiring stays neat. With Class I Division 2 support, it fits tough rooms. For teams using Modicon Premium Automation, this card is a smart pick.
Best Fit Equipment And Applications
- Valve positioners
- Variable speed drives
- Process control loops
- Temperature control skids
- Flow and pressure panels
- Test benches
- Water treatment boards
- OEM analog cabinets
Installation Guide
- Mount the card in a Modicon Premium Automation rack.
- Keep the cabinet clean and dry.
- Use 24 V DC on the supply line.
- Wire loops to the SUB-D 25 connector.
- Keep current loads under 600 Ohm.
- Keep voltage loads above 1000 Ohm.
- Keep the IP20 unit inside a protected panel.
- Review wiring before startup.
Setup And Maintenance Ease
- 8 channels cut extra cards.
- SUB-D 25 port speeds wiring.
- 1 ms response helps fast loops.
- 13-bit design eases fine tuning.
- 1000 Vrms isolation lowers noise.
- Short-circuit guard adds safety.
- CE marking eases system review.
- Routine checks keep loops stable.
Compatibility Notes
- Works with TSX Micro PLCs.
- Fits Modicon Premium Automation.
- Drives 0 to 20 mA loops.
- Drives 4 to 20 mA loops.
- Outputs +/- 10 V and 0 to 10 V.
- Uses a SUB-D 25 connector.
- Follows IEC 61131-2 and UL 508.
- Fits Class I Division 2 areas.
FAQ
- Q: How many loops can this card drive?
A: It drives up to 8 loops. - Q: Which signal types does it output?
A: It outputs voltage or current per channel. - Q: What current ranges are available?
A: It offers 0 to 20 mA and 4 to 20 mA. - Q: How fine is the output step?
A: The step is 1.28 mV at +/- 10 V. - Q: What load can a current channel take?
A: It takes loads under 600 Ohm. - Q: How fast does one channel respond?
A: It responds in about 1 ms. - Q: How fast do you ship this card?
A: Orders ship in 12-24 hours. - Q: Which couriers do you use?
A: We use Fedex, UPS, and DHL. - Q: What warranty comes with it?
A: It includes a 12-month warranty. - Q: How do I pick the right analog card?
A: Match channel count, signal type, load, and rack series first.
Buying Guide
- Count your loops. This card drives 8 channels.
- Pick your signal. It handles voltage and current.
- Check your load. Current loops need under 600 Ohm.
- Review your range. It covers +/- 10 V and 4 to 20 mA.
- Plan for speed. It responds in about 1 ms.
- Check panel space. It uses a standard module slot.
- Check room heat. It runs from 0 to 60°C.
- Choose this card for mixed analog control loops.
Warranty And Shipping
- 12-month warranty included.
- Ships in 12-24 hours.
- Courier options: Fedex, UPS, DHL.
- Tracking details shared after dispatch.
- Packing aims to protect the unit in transit.
Contact Information Inquiries
- Email: sales@powergearx.com
- WhatsApp: +86 18030005825
Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
















There are no reviews yet.