Product details
TM3AM6 Analog Mixed Module by Schneider Electric
One module. Six channels. Full analog control. The TM3AM6 packs 4 inputs and 2 outputs into a slim 23.6 mm body. Each channel configures by software. Use voltage or current. Read and write signals in one place. Great for compact machines that need both measurement and control.
Why This Module Stands Out
- Mixed I/O in one slot. 4 analog inputs plus 2 analog outputs.
- High accuracy. ±0.1% full scale at 25 °C.
- Strong isolation. 1500 V AC between I/O and supply.
- Flexible signals. 0-10 V, ±10 V, 0-20 mA, 4-20 mA.
- Easy wiring. Removable screw terminal block.
Technical Data
- Brand: Schneider Electric
- Model: TM3AM6
- Series: Modicon TM3
- Module type: Analog mixed, 4 AI + 2 AO
- Signal type inputs: 0-10 Vdc, ±10 Vdc, 0-20 mA, 4-20 mA
- Signal type outputs: 0-10 Vdc, ±10 Vdc, 0-20 mA, 4-20 mA
- Range: 0-10 V / ±10 V / 0-20 mA / 4-20 mA
- Resolution: 12 bits for AI and AO
- Accuracy: ±0.1% FS at 25 °C; ±1% FS over temperature
- Isolation: 1500 V AC analog I/O to supply; 500 V AC analog I/O to logic
- Diagnostics: Channel status, module status, bus status
- Response time: 1 ms + 1 ms per channel + 1 controller cycle
- Wiring: Removable screw terminal, 3.81 mm pitch
- Supply voltage: 24 Vdc via TM3 bus
- Bus current: 50 mA at 5 V DC; 50 mA at 24 V DC (full load)
- Operating temperature: 0 to +55 °C
- Storage temperature: -25 to +70 °C
- Protection rating: IP20
- Dimensions (H×W×D): 90 × 23.6 × 70 mm
- Weight: 0.11 kg
- Compatible platforms: Modicon M221, M241, M251, M262
- Lifecycle: Active, last verified 2026-09
Installation Steps
- Snap the module onto the TM3 bus rail.
- Connect 24 Vdc through the bus.
- Wire signals to the removable terminal block.
- Keep analog wires apart from power cables.
- Mount inside an IP20 enclosure.
Setup and Care
- Set each channel in software. Pick voltage or current.
- Use diagnostics to spot faults fast.
- No regular calibration needed.
- Power down before you swap the module.
Works With
- Modicon M221, M241, M251, M262 controllers.
- Part of the Modicon TM3 expansion family.
- Also fits M340 PLC systems via TM3 bus.
Expert Review
Manager’s Insight: The TM3AM6 saves space and cost. One module does the job of two. The 0.1% accuracy is strong for this class. The 1500 V isolation protects your logic. Outputs handle 0-10 V and 4-20 mA with ease. Response time depends on channel count. For 6 channels, expect several milliseconds. This suits small to mid-size machines. Not for high-speed loops. Buy it when you need mixed analog I/O in one slot.
Best Applications
- Compact machines with 4 sensors and 2 valves.
- Process control: flow, pressure, temperature loops.
- Speed and position feedback with analog drives.
- Test benches needing read and write signals.
- Retrofit projects with limited panel space.
FAQ
Q: Can I use inputs and outputs at the same time?
A: Yes. All 6 channels work together. No sharing needed.
Q: What is the warranty?
A: 12 months from purchase. Covers defects. Not misuse.
Q: How fast do you ship?
A: 12-24 hours for stock items. Sent by FedEx, UPS, or DHL.
Q: Do I need special software to set channels?
A: Use EcoStruxure Machine Expert or your controller’s tool. Set each channel in the config menu.
Q: How do I pick between TM3AM6 and TM3AI8?
A: TM3AM6 gives you outputs. TM3AI8 gives you 8 inputs. Count your outputs first. If you need to drive valves or drives, pick TM3AM6. If you only read sensors, pick TM3AI8.
Q: What if my signal is 4-20 mA and I need 0-10 V?
A: You can set the same channel to either mode. Just change it in software. No rewiring needed.
Q: Can I mix voltage and current on different channels?
A: Yes. Each channel is independent. Set them one by one.
Contact Information
- Email: sales@powergearx.com
- WhatsApp: +86 18030005825
Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/















There are no reviews yet.