Product details
MHDA1008N00 Schneider Electric Lexium 17D Servo Drive
The MHDA1008N00 is a servo drive from Schneider Electric. It sits in the Lexium 17D 8A series. This unit runs on 3-phase power. It accepts 230 to 480 V input. Also, it works with 50 Hz or 60 Hz. Because of this, it fits many motor control tasks.
Core Highlights
- Brand: Schneider Electric
- Model: MHDA1008N00
- Series: Lexium 17D 8A
- Product Line: Modicon
- Type: Servo Drive
- Weight: 5.27 kg
Technical Data
- Power Supply:
- 3 phase
- Input Voltage Range:
- 230 to 480 V
- Frequency:
- 50 Hz
- 60 Hz
- Max Input Current: 3 A
- Power Rating: 2 kVA
- Output: Uses output current
- Operating Temperature: 0 to 40 °C
- Operating Humidity: 80 % non-condensing
- Storage Humidity: 80 % non-condensing
- Installation Height: Up to 1000 m above sea level
Installation Guide
- Use a 3-phase supply.
- Keep input between 230 and 480 V.
- Match line frequency to 50 or 60 Hz.
- Do not exceed 3 A input current.
- Mount below 1000 m altitude.
- Keep room temp at 0 to 40 °C.
- Prevent condensation.
- Check wiring before power on.
Setup and Care
- Check input voltage each season.
- Inspect cables for wear.
- Keep the cabinet clean.
- Watch for heat build up.
- Log any fault codes.
- Replace fans on schedule.
- Keep spare fuses nearby.
Compatibility Notes
- Pairs with Lexium 17D motors.
- Fits Modicon control systems.
- Needs a 3-phase line.
- Check motor current before use.
- Use shielded cables for signals.
- Confirm drive rating matches load.
Warranty and Shipping
- 12-month warranty covers factory defects.
- Orders leave in 12 to 24 hours.
- We ship by FedEx, UPS, and DHL.
- Tracking goes out after dispatch.
- Ask sales@powergearx.com for stock.
- Message +86 18030005825 for fast help.
Expert Review
The MHDA1008N00 is a strong drive for mid-size motor tasks. It runs on 3-phase power. It takes 230 to 480 V without extra parts. Also, it handles both 50 Hz and 60 Hz grids. The 2 kVA rating suits many servo loads. Its 3 A input cap keeps wiring simple. The 0 to 40 °C range fits most plants. Humidity must stay at 80 % or less, with no condensation. Install below 1000 m for best life. For legacy Lexium 17D lines, this drive is a wise spare. Therefore, keep one on the shelf.
Manager’s Insight
Buy the MHDA1008N00 when you run Lexium 17D motors. It also fits Modicon panels. However, check three things first. One, your line voltage. Two, your motor current. Three, your room temp. Stay inside 230 to 480 V. Keep input under 3 A. Hold temp at 0 to 40 °C. If your site sits above 1000 m, derate or rethink. For bulk orders, email sales@powergearx.com. For quick quotes, use +86 18030005825.
Best Suited Devices and Applications
- Lexium 17D servo motors
- Modicon control panels
- CNC feed axes
- Packaging machines
- Textile lines
- Material handling gear
- Printing press drives
- Small robot arms
FAQ
- Q: What power supply does this drive need?
A: It needs a 3-phase line. Keep voltage between 230 and 480 V. - Q: Can it run on both 50 Hz and 60 Hz?
A: Yes. It supports both 50 Hz and 60 Hz. No settings change needed for most sites. - Q: How much input current does it draw?
A: The max is 3 A. Size your breaker and cable for that value. - Q: What is the power rating?
A: It is rated at 2 kVA. Match this to your motor load. - Q: What warranty and shipping do you offer?
A: We give a 12-month warranty. Ship out takes 12 to 24 hours. We use FedEx, UPS, and DHL.
Buying Guide
- Check your motor current first.
- Confirm your line is 3-phase.
- Measure site voltage. Stay within 230 to 480 V.
- Note your grid frequency.
- Keep room temp under 40 °C.
- Check site altitude. Stay below 1000 m.
- Ask about stock before you buy.
- Keep one spare for critical lines.
- Contact sales@powergearx.com for quotes.
Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/















There are no reviews yet.