Over 50,000 hot-selling automation module components.

MDX91A-0750-503-4-T00 SEW MOVIDRIVE Multi-Axis Inverter 75 A

0 Reviews
In stock
  • 100% genuine products in stock with fast delivery.
  • 30-day return policy for quality assurance.
  • 12-month warranty for peace of mind.
SKU: MDX91A-0750-503-4-T00
Brands:

Product details

以下是可直接粘贴到 Shopify 产品内容编辑器的 HTML 片段(不含 html/body 等标签,无 CSS、无 div、无表格、无分割线、无星号):

Product Overview

MDX91A-0750-503-4-T00 is a book-style multi-axis inverter from SEW-EURODRIVE. It belongs to the MOVIDRIVE modular MDX91A series. The unit delivers 75.0 A rated output at 4 kHz PWM. It connects directly to a 3-phase AC line. Frame size 5 supports 4-quadrant operation. An integrated DC 24 V auxiliary supply (80 W) is included. A brake chopper is built in. The drive suits control-cabinet multi-axis systems in industrial automation.

Key Technical Data

  • Brand: SEW-EURODRIVE
  • Model: MDX91A-0750-503-4-T00
  • Series: MOVIDRIVE modular Multi-Axis Inverter (MDX91A)
  • Frame size: 5
  • Rated output current: 75.0 A at 4 kHz PWM
  • Nominal line current: 67.5 A
  • Supply voltage: 3 x AC 380-500 V, 50-60 Hz
  • Line frequency tolerance: 50-60 Hz, plus or minus 5%
  • Recommended motor power (ASM): 37 kW
  • Apparent output power S_N: 46.8 kVA
  • Overload capacity: 200% of I_N for 3 s at 4 kHz PWM
  • Continuous output at 0 Hz: I_N x 0.9
  • PWM frequency: 4, 8, 16 kHz, adjustable
  • Max output frequency: U/f 599 Hz; VFCplus 250 Hz; CFC 500 Hz; ELSM 500 Hz
  • Nominal DC link voltage: DC 560 V
  • Brake chopper continuous power: 46.8 kW
  • Brake chopper peak power: 200% x S_N
  • Power section nominal loss: 760 W
  • Control modes: U/f, VFCplus, CFC, ELSM
  • Weight: 12.1 kg

Control Performance

  • Resolution and response: field-oriented CFC and ELSM control give fast torque response for dynamic loads.
  • Speed range: output frequency up to 599 Hz in U/f mode.
  • Linearity: stable current control across the full 4 kHz PWM range.
  • Interference immunity: basic EMC filtering is integrated.
  • Measurement accuracy: consistent current regulation at 0 Hz with I_N x 0.9.

Environmental Tolerance

  • Operating temperature: 0 to +40 °C without derating
  • Operating temperature with derating: +40 to +60 °C
  • Storage temperature: -25 to +70 °C, non-condensing (EN 60721-3-1 class 1K2)
  • Transport temperature: -25 to +70 °C, non-condensing (EN 60721-3-2 class 2K3)
  • Relative humidity: non-condensing (EN 60721-3-3 class 3K3)
  • Protection rating: IP10; IP20 with optional plastic terminal covers
  • Pollution class: 2 (IEC 60664-1); overvoltage category III
  • Installation altitude: up to 1000 m without restriction
  • Altitude derating: 1% per 100 m from 1000 to 3800 m

Communication and Compatibility

  • Built-in system bus: EtherCAT with CiA402 profile
  • Fieldbus option cards: /CFN21A PROFINET IO, /DFE32B EtherNet/IP, /DFI11B PROFIBUS DPV1
  • Expansion cards: /CES11A multi-encoder, /CID21A encoder interface, /CIO21A I/O expansion
  • Safety option: /CS..A MOVISAFE card
  • Coating option: /L conformal-coated PCB
  • Platform fit: part of the MOVI-C platform and MOVIDRIVE system

Installation Guide

  • Mount the book-style unit vertically inside a control cabinet.
  • Keep the specified clearances for cooling air.
  • Connect line and motor cables to the M8 screw terminals.
  • Wire the DC 24 V auxiliary supply, or add an external supply.
  • Fit a braking resistor if the application needs braking energy.
  • Add plastic terminal covers to reach IP20.
  • Follow the dimension drawings in product manual section 2.7.

Commissioning and Maintenance

  • Set the control mode to match the motor type.
  • Run the startup routine for CFC or ELSM motors.
  • Check current limits and overload settings.
  • Keep firmware and option cards aligned with the manual.
  • Clean cooling paths at regular service intervals.
  • Check screw terminals for tightness during service.

Certifications and Standards

  • Pollution class 2 per IEC 60664-1
  • Overvoltage category III
  • Climate classes 1K2, 2K3 and 3K3 per EN 60721
  • Basic EMC interference suppression integrated
  • Current manual active; last verified 2026-09

Packing List

  • 1 x MDX91A-0750-503-4-T00 inverter
  • 1 x product documentation set
  • Terminal covers only if ordered
  • Braking resistor and option cards sold separately

FAQ

Q: Can this drive run a synchronous motor?

A: Yes. ELSM mode supports extended synchronous motor control.

Q: What is the rated output current?

A: 75.0 A at 4 kHz PWM, with 200% overload for 3 s.

Q: Does it include a brake chopper?

A: Yes. A chopper is built in. Add a BR.. resistor if needed.

Q: Which fieldbuses are supported?

A: EtherCAT is built in. PROFINET, EtherNet/IP and PROFIBUS need option cards.

Q: How much derating applies above 40 °C?

A: The drive derates from +40 to +60 °C. Check the manual curve.

Q: Can I use it above 1000 m altitude?

A: Yes. Derate I_N by 1% per 100 m up to 3800 m.

Q: What protection rating does it ship with?

A: IP10 standard. Add plastic covers for IP20.

Q: Is the DC 24 V supply enough for the control board?

A: The 80 W supply covers control needs. Add an external supply for heavy loads.

Q: How do I pick a braking resistor?

A: Use the resistor selection table. R_BRmin is not a single published value.

Q: What is the typical startup time on site?

A: Most users finish basic startup in under an hour with the manual.

Specifications

  • BrandSEW-Eurodrive
  • Part NumberMDX91A-0750-503-4-T00
  • ConditionOriginal Brand New

Customers Reviews

There are no reviews yet.

Be the first to review “MDX91A-0750-503-4-T00 SEW MOVIDRIVE Multi-Axis Inverter 75 A”

Your email address will not be published. Required fields are marked *

Back to Top
Product has been added to your cart