Product details
Product Overview
MDX91A-0320-503-4-T00 is a multi-axis inverter from SEW-EURODRIVE. It belongs to the MOVIDRIVE modular Multi-Axis Inverter (MDX91A) series. This book-style control-cabinet unit is built for multi-axis systems. It connects directly to a 3-phase AC line. Frame size 4 supports 4-quadrant operation. The rated output is 32.0 A at 4 kHz PWM. An integrated DC 24 V auxiliary supply delivers 80 W. You can add external power if needed. The unit includes a brake chopper. A braking resistor is optional. Line and motor terminals use plug connectors. Accepted wire range is 0.5 to 16 mm². Twin conductors accept 0.5 to 6 mm². This drive suits demanding automation tasks. It combines field-oriented control with flexible communication. It is part of the MOVI-C platform.
Technical Data
- Brand: SEW-EURODRIVE
- Model: MDX91A-0320-503-4-T00
- Series: MOVIDRIVE modular Multi-Axis Inverter (MDX91A)
- Module type: Multi-axis application inverter, book-style, frame size 4
- Supply voltage: 3 x AC 380 to 500 V nominal, 50 to 60 Hz
- Line frequency tolerance: 50 to 60 Hz, ±5%
- Nominal line current: 28.8 A
- Rated output current: 32.0 A at f_PWM = 4 kHz
- Recommended motor power (ASM): 15 kW
- Apparent output power S_N: 19.8 kVA
- Overload capacity: 200% of I_N for 3 s at 4 kHz PWM
- Continuous output current at 0 Hz: I_N x 0.9
- PWM frequency: 4, 8, 16 kHz, adjustable
- Max output frequency: U/f 599 Hz; VFCplus 250 Hz; CFC 500 Hz; ELSM 500 Hz
- Nominal DC link voltage: DC 560 V
- Minimum braking resistance: 15 Ω
- Brake chopper continuous power: 19.8 kW
- Brake chopper peak power: 200% x S_N
- Power section nominal loss: 282 W
- Control modes: U/f, VFCplus, CFC, ELSM
- Operation: 4-quadrant
- Auxiliary supply: DC 24 V, 80 W, external supplement possible
- Integrated brake chopper: Yes
- EMC variant: Basic interference suppression integrated
Communication and Compatibility
- Built-in port: System bus EtherCAT / CiA402
- Fieldbus control: MOVIDRIVE technology variant
- Fieldbus option cards: /CFN21A PROFINET IO; /DFE32B EtherNet/IP; /DFI11B PROFIBUS DPV1
- Expansion cards: /CES11A multi-encoder; /CID21A encoder interface; /CIO21A I/O expansion; /CS..A MOVISAFE safety card; /L conformal-coated PCB
- System fit: Part of the MOVI-C platform and MOVIDRIVE system
Environmental Tolerance and Interference Immunity
- Operating temperature: 0 to +40 °C without derating; +40 to +60 °C with derating
- Storage temperature: -25 to +70 °C, EN 60721-3-1 class 1K2, non-condensing
- Transport temperature: -25 to +70 °C, EN 60721-3-2 class 2K3, non-condensing
- Relative humidity: Non-condensing, no moisture condensation, EN 60721-3-3 class 3K3
- Protection rating: IP20, EN 60529
- Pollution class: 2, IEC 60664-1; overvoltage category III
- Installation altitude: Up to 1000 m without restriction; 1000 to 3800 m with 1% I_N derating per 100 m
- Interference immunity: Basic interference suppression integrated; EMC design supports stable industrial operation
Measurement and Control Performance
- Current rating: 32.0 A output at 4 kHz PWM gives a clear current ceiling for drive sizing
- Frequency response: Output frequency reaches 599 Hz in U/f mode and 500 Hz in CFC or ELSM mode
- Control resolution: CFC and ELSM modes support fine speed and torque control
- Linearity: Field-oriented current control supports stable torque across the speed range
- Sensitivity: Encoder interface options improve feedback accuracy for demanding motion tasks
- Overload response: 200% of I_N for 3 s handles short load peaks
Installation Guide
- Mount the book-style unit inside a control cabinet with frame size 4 clearance
- Keep the IP20 rating in mind; protect against dust and moisture
- Use 3 x AC 380 to 500 V supply with 50 to 60 Hz line frequency
- Connect line and motor cables through the plug connectors
- Use 0.5 to 16 mm² wire; twin conductors accept 0.5 to 6 mm²
- Wire the DC 24 V auxiliary supply; add external power if the 80 W budget is tight
- Install a braking resistor if braking energy must be dissipated; observe 15 Ω minimum
- Follow altitude derating above 1000 m: 1% I_N per 100 m
- Respect the temperature derating above +40 °C
Commissioning and Maintenance Convenience
- Start with the built-in EtherCAT / CiA402 system bus for fast fieldbus setup
- Select U/f, VFCplus, CFC, or ELSM to match the motor and load
- Use option cards to add encoders, I/O, or safety functions without replacing the drive
- Plug connectors simplify cable changes during service
- The integrated brake chopper reduces extra wiring for braking tasks
- Basic interference suppression is built in, which lowers filter effort
- Keep cabinet airflow clear to stay within the 0 to +40 °C full-load range
- Check fan and filter paths during routine maintenance
Certifications and Standards
- Protection: IP20 according to EN 60529
- Pollution degree: 2 according to IEC 60664-1
- Overvoltage category: III
- Storage: EN 60721-3-1 class 1K2
- Transport: EN 60721-3-2 class 2K3
- Humidity: EN 60721-3-3 class 3K3
- Safety option: /CS..A MOVISAFE card available for safety-related applications
Physical Data and Package Contents
- Dimensions (H x W x D): 494 x 135 x 260 mm, height with shield plates
- Weight: 6.6 kg
- Package contents: MDX91A-0320-503-4-T00 inverter unit; plug connectors for line and motor terminals; basic documentation set
- Optional items: Braking resistor BR..; fieldbus cards; encoder and I/O cards; MOVISAFE safety card; conformal-coated PCB variant
FAQ
Q: Can this drive run without an external DC 24 V supply?
A: Yes. It has an integrated 80 W auxiliary supply. Add external power only if your load needs more.
Q: What is the minimum braking resistor value?
A: Use a resistor of at least 15 Ω. The integrated brake chopper handles 19.8 kW continuous.
Q: How do I pick a control mode for a permanent-magnet motor?
A: ELSM is designed for extended synchronous motor control. CFC also suits field-oriented tasks.
Q: Can I use this unit above 40 °C?
A: Yes, up to +60 °C with derating. Keep the cabinet airflow strong.
Q: Does the drive support PROFINET out of the box?
A: The built-in port is EtherCAT / CiA402. Add the /CFN21A card for PROFINET IO.
Q: What should I check first if the drive trips on overload?
A: Compare the load cycle with the 200% for 3 s rating. Also check PWM setting and motor data.
Q: Is this model part of an active product line?
A: Yes. SEW-EURODRIVE lists it in the current MOVI-C platform. The product manual is active.
Q: Can I mount the unit at 2000 m altitude?
A: Yes, with 1% I_N derating per 100 m above 1000 m. At 2000 m, derate by 10%.

















There are no reviews yet.