IC697MDL671 GE Fanuc 16-Point Interrupt Input Module

Product Overview

• IC697MDL671 is a 16-point interrupt input module from GE Fanuc Series 90-70.
• It runs on 24 Volts DC and suits DC-powered control systems.
• The module has 16 inputs in 4 groups of 4.
• Points carry letter-number codes from A1 to D4.
• The last 2 inputs in the last group serve configuration tasks.
• It supports positive or negative logic, so it fits many signal types.
• It works with pushbuttons, switches, and proximity sensors.
• It offers space for an input filter and runs on its own.
• A dedicated key blocks wrong installation.
• This part helps boost system efficiency and keeps operation stable.

Technical Data

• Brand
  • GE Fanuc
• Series
  • Series 90-70
• Model
  • IC697MDL671
• Module Type
  • Interrupt input module
• Rated Voltage
  • 24 Volts DC
• Input Voltage Range
  • -3 to 30 Volts DC
• Inputs per Module
  • 16 inputs, in 4 groups of 4
• Input Current
  • 10 milliAmps
• Required Current
  • 0.3 Amps
• Isolation Voltage
  • 1500 Volts
• ON-State Voltage
  • 13.5 to 30 Volts
• OFF-State Voltage
  • -3 to 5 Volts (positive logic)
  • -5 to 30 Volts (negative logic)
• ON-State Current
  • 6 to 15 milliAmps
• OFF-State Current
  • 0 to 2 milliAmps
• Measurement Range
  • Input range covers -3 to 30 Volts DC.
• Frequency Response
  • Built for the desired interrupt rate.
• Sensitivity
  • ON at 13.5 Volts or higher.
• Linearity
  • Stable input response across the rated range.
• Resolution
  • Each of the 16 points reads on its own.
• Temperature Range
  • Follow the Series 90-70 cabinet limits.
• Environmental Tolerance
  • Runs in standard industrial control rooms.
• Noise Immunity
  • 1500 Volts isolation blocks noise between field and logic.

Installation Guide

• Check the slot key before you insert the module.
• The key stops wrong placement in the rack.
• Wire field devices to points A1 to D4.
• Keep the last 2 inputs free for configuration.
• Use a 24 Volts DC supply for the field side.
• Tighten terminals to the rack torque spec.

Setup and Maintenance Ease

• Set positive or negative logic at setup.
• Fit an input filter in the space provided.
• Each group of 4 inputs runs on its own.
• Front access makes checks quick.
• Swap a faulty unit with the key in place.

Compatibility Notes

• Fits GE Fanuc Series 90-70 racks.
• Works with DC-powered systems.
• Pairs with pushbuttons, switches, and proximity sensors.
• Supports both positive and negative logic.

Certification Information

• Built to GE Fanuc Series 90-70 specs.
• Isolation rating: 1500 Volts.
• Ask your supplier for the current certificate pack.

Packing List

• IC697MDL671 module, 1 piece
• Dedicated key, 1 piece
• User document, 1 copy

FAQ

• Q: How many inputs does this module give me?
  • A: It gives 16 inputs in 4 groups of 4.
• Q: What voltage does it need?
  • A: It needs 24 Volts DC.
• Q: Can I use it with negative logic?
  • A: Yes. It supports positive and negative logic.
• Q: What are the last 2 inputs for?
  • A: They are for configuration.
• Q: How much isolation does it offer?
  • A: It offers 1500 Volts isolation.
• Q: From experience, what trips up first-time installers?
  • A: Many skip the slot key and force the module. Check the key first.
• Q: What do field techs check when a point will not turn on?
  • A: They check input voltage. A point needs at least 13.5 Volts to turn on.
• Q: Does it fit older Series 90-70 racks?
  • A: Yes, if the rack takes this part number. Confirm the slot key and wiring first.