Honeywell XNXXSX1SS ClO₂ Sensor Cartridge – Fast EC Response, 1ppm

Product Overview – Honeywell XNXXSX1SS

• XNXXSX1SS is a smart EC sensor cartridge from Honeywell.
• Designed specifically for chlorine dioxide (ClO₂) detection.
• Default range: 1.00 ppm with 0.03 ppm lower limit.
• Fast T50 response under 30 seconds.
• Accurate to ±0.03 ppm for reliable safety monitoring.
• Works in harsh environments from -20°C to 55°C.

Technical Specifications – Tree Structure

• Gas Type
  • ClO₂ (Chlorine Dioxide)
• Measurement Range
  • Default Full Scale: 1.00 ppm
  • Lower Detectable Limit: 0.03 ppm
  • Selectable Cal Gas Range: 30–70% of full scale
  • Default Cal Point: 0.5 ppm
• Response Speed
  • T50: < 30 seconds
  • T90: < 120 seconds
• Accuracy
  • ±0.03 ppm
• Operating Temperature
  • -20°C to 55°C (-4°F to 131°F)

Manager’s Insight

• “This sensor delivers stable ClO₂ readings in tough conditions.”
• “Fast response helps prevent gas leaks from becoming hazards.”
• “Easy cartridge replacement reduces maintenance time.”
• “Its wide temperature range suits outdoor and indoor use.”

Expert Review

• “Honeywell XNXSX1SS is a top choice for ClO₂ monitoring.”
• “Accuracy of ±0.03 ppm meets most industrial safety standards.”
• “Plug-and-play design simplifies installation for any technician.”
• “Reliable performance even in high-humidity environments.”

Applications & Compatible Equipment

• Water treatment plants – monitor chlorine dioxide residual
• Pulp & paper mills – bleaching area gas detection
• Food processing – disinfection zone safety
• Chemical storage rooms – leak prevention
• Wastewater facilities – odor control and safety
• Honeywell XNX universal transmitters – direct fit

Comparison with Similar Models

• Honeywell XNXSX1SS vs XNXSX1SV (ClO₂)
• XNXSX1SS vs XNXSX1ST (Cl₂)
• XNXSX1SS vs XNXSX1SA (NH₃)
• XNXSX1SS vs XNXSX1SH (H₂S)

Buying Guide & Practical Tips

• Check your transmitter compatibility – XNX series only.
• Order spare cartridges to avoid downtime.
• Store in cool, dry place before installation.
• Calibrate with 0.5 ppm gas for best accuracy.
• Replace cartridge every 12 months for safety.
• We offer 12-month warranty on all sensors.
• Dispatch within 12-24 hours after order.
• Shipping via FedEx, UPS, or DHL.

Frequently Asked Questions (FAQ)

• What is the default calibration point?
• 0.5 ppm is the factory-set calibration point.
• Can I use this sensor for other gases?
• No, it is specifically for ClO₂ only.
• How often should I calibrate?
• Every 3 to 6 months depending on usage.
• Is the cartridge pre-calibrated?
• Yes, it comes pre-calibrated and ready to install.
• What if the sensor shows unstable readings?
• Check for moisture or dirt on the sensing element.
• Does it work with older Honeywell transmitters?
• Compatible with XNX series transmitters only.
• What is the shipping weight?
• Approximately 0.5 kg with packaging.
• Can I get technical support?
• Yes, our team is available 24/7 for assistance.

Contact Information

• Email: sales@powergearx.com
• WhatsApp: +86 18030005825

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/