Product details
Product Brief
- XNX-AMAV-NNIC1 is a universal transmitter from Honeywell.
- It delivers IR CO2 detection from 0 to 5% vol.
- This unit supports HART® over 4-20mA for digital communication.
- Built for harsh environments with ATEX/IECEx/INMETRO approval.
Technical Data
- Brand: Honeywell
- Model: XNX-AMAV-NNIC1
- Series: XNX Universal Transmitter
- Measurement Range: 0–5% vol CO2 (IR sensor)
- Output Signal: 4-20mA with HART® protocol
- Frequency Response: fast T90 < 30 s
- Sensitivity: ±1% full scale
- Linearity: ±2% of reading
- Resolution: 0.01% vol CO2
- Temperature Range: -20 °C to +55 °C
- Environmental Protection: IP66/IP67 rated enclosure
- Interference Immunity: excellent against humidity and dust
- Enclosure Material: painted aluminium, corrosion resistant
- Electrical Entry: 4 x M25 cable glands
Installation & Commissioning
- Mounting: wall or pipe bracket (optional)
- Wiring: use shielded cable for 4-20mA loop
- Grounding: connect to instrument earth for safety
- Start-up: auto-calibration at power-on
- Maintenance: zero and span check every 6 months
- Sensor replacement: plug-in design, no re-wiring
Compatibility
- Works with Honeywell MPD, Sensepoint, and Model 705 sensors
- HART® compatible with any DCS/PLC that supports 4-20mA
- Milli-volt interface for legacy and new sensors
Approvals & Certificates
- ATEX: II 2G Ex db IIC T6 Gb
- IECEx: Ex db IIC T6 Gb
- INMETRO: Brazilian certification included
- CE marked and compliant with EMC directive
Package Contents
- XNX transmitter with aluminium housing
- MPD IR CO2 sensor (0-5% vol) pre-installed
- 4 x M25 plastic cable glands
- User manual (English)
- Calibration certificate
Warranty & Shipping
- 12-month warranty against manufacturing defects
- Same-day dispatch for orders before 2 PM
- 12–24 hour delivery via FedEx, UPS, or DHL
- Tracking number provided upon shipment
Expert Review
- “The XNX-AMAV-NNIC1 sets a benchmark for industrial CO2 monitoring.”
- “Its HART® integration simplifies remote diagnostics.”
- “Aluminium housing withstands aggressive offshore conditions.”
- “The 0-5% vol range is ideal for safety and process control.”
Manager’s Insight
- “Choose this transmitter to reduce total cost of ownership.”
- “The universal interface supports multiple sensor types.”
- “ATEX/IECEx approval ensures global plant compliance.”
- “Routine maintenance is quick with the plug-in sensor.”
Typical Applications
- Oil & gas refineries – leak detection and area monitoring
- Chemical plants – process control and safety shutdown
- Wastewater treatment – digester gas monitoring
- Breweries & beverage – CO2 storage and filling areas
- Indoor air quality – HVAC and ventilation control
Frequently Asked Questions (FAQ)
- Which sensors work with this transmitter?
- It supports milli-Volt sensors like MPD, Sensepoint, and Model 705 HT/PPM.
- Can I use it for 0-100% CO2?
- No. The IC1 sensor is factory-calibrated for 0-5% vol only.
- Is HART® communication mandatory?
- No. It works as a pure 4-20mA device without HART®.
- How often should I calibrate?
- We recommend a zero/span check every 3–6 months for stable readings.
- Can I install it outdoors?
- Yes. IP66/IP67 and aluminium housing make it weatherproof.
- Does it come with cable glands?
- Yes. 4 x M25 plastic glands are included in the box.
Selection Guide
- For 0-5% CO2 with HART® – choose XNX-AMAV-NNIC1
- For oxygen or toxic gases – select different personality board
- For stainless steel housing – order option S instead of A
- For local display – add option D (not included here)
Ordering & Contact
- Sales Inquiry: sales@powergearx.com
- WhatsApp: +86 18030005825
Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
There are no reviews yet.