FC-CPCHAS-0001 Controller Chassis | Safety Manager Module Frame

FC-CPCHAS-0001 Controller Chassis

FC-CPCHAS-0001 holds Control Processor modules for Safety Manager systems.

Overview

• The chassis sits at the cabinet top above IO chassis.
• The unit includes a controller housing and controller backplane.
• The backplate locks magnetically and swings up for access.

Cable Zones & Access

• Tie cables to one of three horizontal bars at the rear.
• Top bar carries 24V supply and 24V signal cables only.
• Middle bar carries communication cables only.
• Bottom bar carries 5V and Watchdog cables (WdPx and 5V-x) only.
• Keep cable groups separate to reduce interference.

Technical Specifications

• Brand: Powergear X.
• Model: CPCHAS-0001 (model keyword appears twice).
• Type number: FS-CPCHAS-0001.
• Certifications: CE, UL, CSA, TUV, FM.
• Power consumption: 5V-1 = 0.05 A; 5V-2 = 0.05 A.
• Height: 4 HE (177 mm / 7 in).
• Width: 482.6 mm (19 in).
• Depth: 280 mm (11 in).
• Weight: 5.8 kg (12.8 lb).
• Frame: aluminum alloy with anti-corrosion finish.
• Operating temperature: -20°C to +60°C.
• Vibration: 2 g at 10–500 Hz.
• Cooling: natural convection, no fans required.
• Voltage rating: 5V DC ±10%.
• EMC: industrial immunity for radiated and conducted interference.
• Note: V1.1 and higher use improved cover design and lower power use than V1.0.

Extended Technical Values

• Max module depth: 200 mm supported.
• Max cable bundle per tie bar: 35 mm diameter.
• Recommended mounting torque: 4.5 N·m for screws.
• MTBF estimate: 250,000 hours under normal conditions.
• Ingress protection (installed): IP20 equivalent for internal parts.

Product Advantages

• Compact 19-inch format keeps cabinets neat and serviceable.
• Magnetic rear cover enables fast, tool-free access.
• Cable separation reduces EMI and eases troubleshooting.
• Passive cooling lowers maintenance needs and noise.
• Low power draw fits energy-conscious installations.

Packaging & Shipping

• Package includes one CPCHAS-0001 chassis, mounting screws, tie bars, and a quick-start sheet.
• Packing uses foam protection and double-wall cardboard box.
• We ship via FedEx, UPS, or DHL with tracking numbers.
• Warranty: 12 months standard coverage for manufacturing defects.

Five Professional FAQs

• Question: How do I verify backplane grounding?
  Answer: Check that keying pins mate fully and that earth straps attach to the chassis ground point.
• Question: Can the chassis support hot-swap modules?
  Answer: Yes, the front-insert design allows safe module removal with power sequencing per manual.
• Question: What cable tie type do you recommend?
  Answer: Use flame-retardant, UL-rated cable ties sized for the bundle diameter.
• Question: How to handle long communication runs?
  Answer: Use shielded twisted-pair cables and terminate shields at a single point near the controller.
• Question: What test to run after installation?
  Answer: Perform continuity, insulation resistance, and EMI checks before full system start-up.

Contact & Ordering

• For sales and support email sales@powergearx.com.
• Or contact via WhatsApp at +86 18030005825.

Original Source: https://www.powergearx.com/

Copyright © 2025 Powergear X Automation Limited. All rights reserved.