Product details
EVS9324-ET Lenze Global Drive 9300 Servo Inverter – Product Overview
EVS9324-ET is a Lenze servo inverter from the Global Drive 9300 series. It delivers 3.0 kW rated motor power with 7.0 A rated output current. The drive uses field-oriented servo control for synchronous and asynchronous motors. A built-in CANopen system bus and an AIF expansion slot keep integration simple. The push-through design saves cabinet space. This unit suits demanding motion tasks in legacy 9300 platforms.
Why This Drive Stands Out
- Proven servo control. Field-oriented control (SC) covers servo and standard asynchronous motors.
- Strong overload headroom. Maximum output current reaches 10.5 A at 8 kHz.
- Flexible feedback. Resolver input plus a multi-encoder port for TTL, SinCos and Hiperface.
- Onboard networking. CANopen system bus ships as standard.
- Clear migration route. Lenze confirms an official path to the i950 generation.
Technical Specifications
- Brand: Lenze
- Model: EVS9324-ET
- Series: Global Drive 9300 Servo Inverters
- Rated motor power: 3.0 kW (4-pole async motor, 400 V)
- Rated output current: 7.0 A nominal at 8 kHz
- Maximum output current: 10.5 A at 8 kHz (150 % x In, overload mode)
- Control mode: Field-oriented servo control (SC)
- Program memory: 655 kByte flash (Servo PLC variants)
- Analog inputs: 2, +/-10 V or 0…20 mA, 11 bits + sign
- Analog outputs: 2, 9 bits + sign
- Digital inputs: 6 (1 enable + 5 assignable), PLC level per IEC 61131-2
- Digital outputs: 4, 50 mA each
- Resolver input: Sub-D 9-pin
- Encoder input: Multi-encoder for TTL/SinCos and Hiperface
- Frequency input/output: Two-track each, Sub-D 9-pin
- Built-in ports: CAN system bus (X4), AIF interface (X1)
- Protocols: CANopen (integrated system bus)
- Expansion modules: PROFIBUS DP (EMF2133IB), DeviceNet (EMF2179IB), INTERBUS (EMF2113IB), LECOM A/B (EMF2102IB)
- Supply voltage: 3/PE AC 320…528 V, 45…65 Hz; DC 460…740 V
- Power loss at 400 V: 200 W
- Operating temperature: 0…+55 °C ambient; derate 2.5 %/°C above +40 °C
- Storage temperature: -25…+55 °C
- Relative humidity: Average 85 % RH, no condensation (3K3 per EN 50178)
- Protection rating: IP20
- Dimensions (H×W×D): 350 × 97 × 250 mm
- Weight: 5.0 kg
Installation Guide
- Mount the unit vertically inside a cabinet. Keep the push-through airflow path clear.
- Respect IP20 limits. Use a sealed enclosure in dusty or wet areas.
- Wire AC supply within 320…528 V. Check phase and ground first.
- Connect the resolver or encoder to the Sub-D 9-pin ports.
- Set the CANopen node address before power-up.
- Derate output current above +40 °C ambient.
- Follow Lenze EMC rules for motor cable shielding.
Commissioning and Maintenance
- Use the AIF keypad or Lenze engineering tools for fast parameter setup.
- Save the parameter set to flash after tuning.
- Check fan paths and filter mats on a fixed schedule.
- Inspect terminals for tightness at each service interval.
- Replace the resolver cable if feedback noise appears.
Compatibility Notes
- Works with synchronous and asynchronous servo motors.
- Supports standard asynchronous motors in servo mode.
- Accepts TTL, SinCos and Hiperface feedback devices.
- Fits 9300 series AIF communication modules.
- No drop-in same-order-code replacement exists for newer lines.
- Lenze confirms an i950 migration path via compatibility switch and PROFIBUS module.
Expert Review
The EVS9324-ET remains a solid choice for plants still running 9300 platforms. Its 150 % overload capacity handles peak loads well. The multi-encoder input reduces spare-part variety. Buyers should plan the i950 migration early, because direct code-compatible replacements are not available. For service teams, stocking this model shortens downtime on existing machines.
Manager’s Insight
Demand for 9300 spares stays steady in packaging, printing and handling lines. The EVS9324-ET is easy to stock and quick to ship. Keep at least one unit on the shelf for critical axes. Pair it with a spare resolver cable to cut repair time. Orders placed before cut-off ship within 12–24 hours by FedEx, UPS or DHL.
Best-Fit Equipment and Applications
- Packaging machines with servo axes
- Printing and converting lines
- Material handling and conveyor systems
- Textile and plastic processing equipment
- Retrofit projects on 9300-based machines
Certifications and Lifecycle Status
- Designed to EN 50178 climatic class 3K3.
- Digital inputs follow IEC 61131-2 PLC level.
- Not UL-approved per Lenze catalogue note.
- Listed on Lenze “previous products” page.
- Superseded by newer drive generations; i950 migration available.
Packing List and Warranty
- 1 x EVS9324-ET servo inverter
- 1 x product documentation set
- Warranty: 12 months
- Dispatch: 12–24 hours after payment
- Couriers: FedEx, UPS, DHL
FAQ
Q: Can this drive run a standard async motor?
A: Yes. Field-oriented control supports standard asynchronous motors.
Q: What feedback types does it accept?
A: Resolver, TTL, SinCos and Hiperface devices.
Q: Is a direct replacement for newer Lenze lines available?
A: No. Lenze points to the i950 with a compatibility switch instead.
Q: How fast do orders ship?
A: Most orders leave within 12–24 hours by FedEx, UPS or DHL.
Q: What is the warranty?
A: 12 months from delivery.
Q: From experience, what fails first in the field?
A: Feedback cables and fan filters. Keep both as spares.
Q: How do I pick the right spare?
A: Match the order code and rated current. Check the motor feedback type. Confirm the cabinet voltage before ordering.
Contact Us
- Email: sales@powergearx.com
- WhatsApp: +86 18030005825
Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
There are no reviews yet.