EVS9322-EK Lenze 9300 Cam Profiler Servo Inverter EVS9322-EK | Global Drive

EVS9322-EK Lenze Global Drive 9300 Cam Profiler Servo Inverter

Lenze EVS9322-EK is a cam profiler drive from the Global Drive 9300 series. It runs motion profiles for small servo axes. Also, it drives 0.75 kW motors at 400 V. Moreover, it uses field-oriented servo control. As a result, it handles synchronous and asynchronous servo motors with ease.

Product Highlights

• Rated power: 0.75 kW with a 4-pole asynchronous motor at 400 V.
• Rated output current: 2.5 A at 8 kHz switching frequency.
• Peak current: 3.8 A in overload mode, or 150% of In.
• Control mode: Field-oriented servo control for smooth motion.
• Cam profiler: Built-in motion profile function saves a PLC.
• Build: Push-through design saves cabinet space.

Technical Data Tree

• Brand
  • Lenze
• Model
  • EVS9322-EK
• Series
  • Global Drive 9300 Servo Inverters
• Function Variant
  • Cam profiler firmware
  • Built-in or push-through mount
• Power Section
  • Rated motor power: 0.75 kW
  • Rated output current: 2.5 A at 8 kHz
  • Maximum output current: 3.8 A at 8 kHz
  • Overload: 150% x In, periodic cycle
• Control
  • Field-oriented servo control (SC)
  • Supports synchronous servo motors
  • Supports asynchronous servo motors
  • Supports standard asynchronous motors
• Analog I/O
  • Inputs: 2, +/-10 V, switchable 0…20 mA
  • Input resolution: 11 bits plus sign
  • Outputs: 2, 9 bits plus sign
• Digital I/O
  • Inputs: 6, one controller enable plus five free
  • Input level: PLC per IEC 61131-2
  • Outputs: 4, 50 mA each
• Feedback Ports
  • Resolver: Sub-D 9-pin
  • Encoder: multi-encoder input
    • TTL incremental
    • SinCos incremental
    • Hiperface absolute
  • Digital frequency I/O: two-track each, Sub-D 9-pin
• Communication
  • CAN system bus (X4)
  • AIF automation interface (X1)
    • Keypad option
    • Attachable communication module
  • Integrated protocol: CANopen
  • AIF expansion modules
    • PROFIBUS DP: EMF2133IB
    • DeviceNet: EMF2179IB
    • INTERBUS: EMF2113IB
    • LECOM A/B: EMF2102IB
• Electrical
  • Supply: 3/PE AC 320…528 V, 45…65 Hz
  • DC supply option: DC 460…740 V
  • Power loss at 400 V: 110 W
• Environment
  • Ambient: 0…+55 °C (sizes 9321-9326)
  • Derating: 2.5% per °C above +40 °C
  • Note: not UL-approved
  • Storage: -25…+55 °C
  • Humidity: 85% RH average, no condensation
  • Climatic class: 3K3 per EN 50178
  • Protection: IP20
• Physical
  • Size (H×W×D): 350×78×250 mm
  • Weight: 3.5 kg
  • Mount: built-in or push-through
• Lifecycle
  • Status: legacy, on Lenze previous-products page
  • Migration path: i950 with compatibility switch
  • Also: i950 PROFIBUS module plus L_ICIP library
  • No drop-in same-order-code swap
  • Last verified: 2026-10

Installation Guide

• Fit the unit into a cabinet with IP20 clearance.
• Wire 3/PE AC 320…528 V to the input.
• Keep ambient at or below 55 °C.
• Derate current above 40 °C.
• Connect the resolver or encoder before power-up.
• Load the cam profile before you start the axis.

Setup and Maintenance Ease

• Since the cam profiler is built in, you skip extra PLC code.
• The keypad port makes parameter checks simple.
• One AIF slot covers four fieldbus options.
• Routine checks cover fan flow and terminal torque.

Compatibility Notes

• Fits Global Drive 9300 racks with matching slot size.
• Works with Lenze keypad over AIF X1.
• Talks CANopen on the system bus.
• Pairs with EMF2133IB, EMF2179IB, EMF2113IB and EMF2102IB modules.
• For new builds, check the i950 migration path first.

Certifications

• Meets EN 50178 climatic class 3K3.
• Not UL-approved. Confirm local rules.
• Ask our team for the current document pack.

Packing List

• 1 x Lenze EVS9322-EK cam profiler drive
• 1 x protective carton
• 1 x packing slip

Warranty and Shipping

• 12-month warranty on every unit.
• We ship in 12–24 hours after payment.
• Express by FedEx, UPS, DHL.
• Tracking number sent on dispatch.

Expert Review

The EVS9322-EK fits small axes well. It gives 2.5 A with a 3.8 A peak. Also, the built-in cam profiler removes a separate motion card. As a result, wiring and setup get simpler. However, it is a legacy part. So plan the i950 path for long-term support. For existing 9300 lines, it is a smart spare.

Manager’s Insight

Keep this drive on the shelf if you run small 9300 cam axes. A stop line costs more than the unit. Since the part is legacy, stock is limited. Therefore, order early. Write to sales@powergearx.com to confirm stock. Then we ship in one day by FedEx, UPS or DHL.

Best Fit Devices and Applications

• Cam-driven packaging machines
• Small indexing and feeding units
• Labeling and filling stations
• Textile and wire winding lines
• Retrofit of existing 9300 servo cabinets

FAQ

• Q: What makes the EK variant different?
  A: It ships with cam profiler firmware. So it runs motion profiles without extra PLC code.
• Q: Can I load my own cam table?
  A: Yes. Use Lenze Global DriveLoader to upload profiles before start-up.
• Q: Which motor types can it run?
  A: It runs synchronous servo motors, asynchronous servo motors, and standard asynchronous motors.
• Q: Is a spare worth the cost?
  A: Yes. Legacy stock is limited. One spare per line prevents long downtime.
• Q: What support comes with the order?
  A: Each unit has a 12-month warranty. Also, orders ship in 12–24 hours by FedEx, UPS or DHL.

Buying Guide

• Confirm EVS9322-EK on the old nameplate.
• Check motor power. Stay at or below 0.75 kW.
• Match the encoder type to your motor.
• Pick the fieldbus module you need.
• Plan the i950 path if you need long-term supply.

Contact Us

• Email: sales@powergearx.com
• WhatsApp: +86 18030005825

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/