Product details
ESMD01KP Remote Keypad for Lenze SMD Inverters
ESMD01KP is a remote keypad for Lenze SMD frequency inverters. It gives full I/O control from a cabinet door. You can start, stop, reverse and set speed from a remote point. The IP65 front suits dusty and wet plant rooms. A 2 m cable comes in the box. This is a legacy accessory for the discontinued SMD platform. It is a direct fit for sites that still run SMD drives.
Need a quote or stock check? Email sales@powergearx.com or message +86 18030005825 on WhatsApp. Most orders ship in 12 to 24 hours by FedEx, UPS or DHL.
Why This Keypad Matters
- Remote control: Run start, stop, reverse and speed setpoint away from the drive.
- Full I/O access: Matches the SMD keypad function set.
- Cabinet door mount: Clean front-panel install with a sealed face.
- IP65 front: Guards against dust and water spray.
- Plug and play: The 2 m cable connects straight to the host drive.
- No extra supply: The host drive powers the panel.
- Simple upgrade: Restores local control on ageing SMD machines.
Technical Data
- Brand: Lenze
- Model: ESMD01KP
- Series: SMD Frequency Inverter accessories
- Module type: External remote keypad with full I/O
- Function: Start, stop, reverse and speed setpoint from a remote point
- Display and keys: Keypad with setpoint potentiometer, per the official SMD accessories list
- Built-in ports: None; the panel links to the drive by its cable
- Protocols: Not applicable; this is an operator panel, not a fieldbus device
- Communication expansion: None
- Supply voltage: Not applicable; the host SMD drive feeds it through the cable
- Power consumption: Not applicable; passive accessory
- Operating temperature: Follows the host drive ambient range; no standalone figure is published
- Storage temperature: No standalone figure is published
- Relative humidity: Non-condensing; no standalone %RH figure is published
- Protection rating: IP65 at the cabinet door front
- Dimensions: 86 x 56 x 18 mm; front face 3.40 x 2.20 in; depth 0.72 in
- Weight: Not published by the maker
- Lifecycle: Legacy SMD accessory; the SMD platform is discontinued
- Audit status: PASSIVE_ADAPTED; last verified 2026-10
Installation Guide
- Pick a dry spot on the cabinet door at eye level.
- Cut the door to the 86 x 56 mm front size.
- Seat the gasket so the face seals to IP65.
- Fix the panel with the supplied hardware.
- Route the 2 m cable away from motor leads.
- Plug the cable into the SMD drive keypad port.
- Power up and check each key and the speed dial.
Setup and Servicing
- No separate PSU means no extra wiring or fuses.
- The potentiometer gives quick speed trim without a laptop.
- Swap a failed panel in minutes with one cable.
- Wipe the front with a damp cloth; no harsh solvents.
- Check the cable gland and gasket at each service visit.
Compatibility Notes
- Built for Lenze SMD frequency inverters.
- Uses the same form factor as the AC Tech remote keypad ESVZXK1.
- Not a fit for later Lenze platforms; the SMD line is closed.
- No fieldbus or network link is built in.
Approvals and Box Contents
- Protection claim IP65 per the official SMD accessories list.
- No separate CE or UL file is listed for this passive panel.
- Box: one ESMD01KP keypad, one 2 m cable, mounting parts.
- Covered by a 12-month warranty.
Expert Review
This panel does one job well: it puts SMD control at the cabinet door. The sealed front and fixed cable cut install time. The lack of a standalone temperature or humidity rating is normal for a passive part. Buyers should confirm the host drive is a Lenze SMD unit before ordering. For legacy lines, this is a low-risk spare.
Manager’s Insight
Most SMD sites keep spare panels on the shelf. One failed keypad can stop a line, so a spare pays for itself fast. Stock is limited as the platform winds down. Order early and pair it with a spare cable. Our team ships in 12 to 24 hours to cut downtime.
Best Fit
- Lenze SMD drives in cabinets with a door cut-out.
- Pumps, fans, conveyors and mixers on legacy SMD lines.
- Plants that need local speed trim without a PC.
- Wash-down or dusty areas that need an IP65 face.
FAQ
Q: Does this panel need its own power supply?
A: No. The host SMD drive powers it through the 2 m cable.
Q: Can I use it on a new Lenze drive?
A: No. It fits the SMD series only, which is discontinued.
Q: Is the IP65 rating valid on a cabinet door?
A: Yes, when you fit the gasket and cut-out to the drawing.
Q: What is in the box?
A: The keypad, a 2 m cable and mounting parts.
Q: How fast do you ship?
A: Most orders leave in 12 to 24 hours by FedEx, UPS or DHL.
Q: Is there a warranty?
A: Yes, 12 months from the ship date.
Q: From experience, what fails first?
A: The cable at the gland. Keep a spare cable on hand.
Q: What should I check before buying?
A: Match the drive nameplate to SMD, then check the door depth for 18 mm.
Q: How do I get help choosing?
A: Send a drive photo to sales@powergearx.com or chat on WhatsApp.
Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
There are no reviews yet.