Product details
E94ASHE0864 Lenze 9400 HighLine Single Drive Axis Module
The Lenze E94ASHE0864 is a cabinet-mount axis module from the 9400 HighLine Single Drive family. It drives one 45 kW 4-pole asynchronous motor in the 400 V class. Rated output current is 86 A. The 2.0 overload factor gives short peaks up to 172 A. CANopen is on board. Two slots are free for extra cards. This module fits large machines that need one strong axis and a proven platform.
Expert Review
This unit is built for heavy duty. The 1500 W power loss tells you it needs real cabinet cooling. Plan the airflow before you mount it. Engineers report steady current at full load. The 42 kg frame and 655 mm height need two people and a solid backplate. Our view: buy it for torque, not for small panels.
Manager’s Insight
Large drives fail at the worst time. Keep one E94ASHE0864 on the shelf. Retrofits of 9400 cabinets are still common. The module drops into the same backplane and reads the saved parameter set. Dispatch runs 12-24 hours by FedEx, UPS, or DHL. Every unit carries a 12-month warranty.
Best Fit Devices and Applications
- Heavy conveyors and bulk handling lines
- Extruders and mixers with one main drive
- Large printing and coating machines
- Wood and stone cutting spindles
- Pumps and fans in process plants
- Retrofit of 45 kW Lenze 9400 cabinets
Technical Data Tree
- Identity
- Brand: Lenze
- Model: E94ASHE0864
- Series: Servo Drives 9400 HighLine Single Drive
- Type: single-axis module, cabinet mount
- Power
- Rated motor power: 45 kW nominal
- Motor class: 4-pole asynchronous, 400 V
- Rated output current: 86 A at 4 kHz
- Max output current: 129 A
- Max short-term current: 172 A
- Overload factor: 2.0
- Rated mains current: 79 A, with or without choke
- Rated DC-bus current: 96.8 A
- Power loss: 1500 W
- Supply
- AC input: 3/PE 180 V to 550 V, 45 to 65 Hz
- DC input: 260 V to 775 V
- Environment
- Operating: -10 °C to +55 °C; derate 2.5 %/°C above +45 °C
- Storage: -25 °C to +60 °C
- Transport: -25 °C to +70 °C
- Altitude: up to 4000 m; derate 5 % per 1000 m above 1000 m
- Vibration: class 2M2, 1.0 g up to 150 Hz
- Humidity: class 3K3, no %RH value published
- Protection: IP20, NEMA 250 type 1
- Body
- Size: 655 × 266 × 370 mm
- Height with flange: 706 mm
- Weight: 42 kg
- Links
- On-board CANopen
- USB diagnostics via E94AZCUS adapter
- Two E94AYC extension slots
- One memory slot, one safety slot
Installation Guide
- Use a backplate that holds 42 kg plus cable pull
- Lift with two people or a hoist
- Leave 706 mm clear height for the flange
- Move 1500 W of heat out of the cabinet
- Keep the IP20 face away from dust and water
- Wire CANopen on the built-in port
Setup and Service
- Commission with Lenze Engineer and the E94AZCUS adapter
- Copy parameters to the memory slot after setup
- Clean the heat sink at each shutdown
- Check cabinet fans every 6 months
- Read fault codes through the USB port
Certifications and Lifecycle
- IP20 per EN 60529, NEMA 250 type 1
- Climate classes per EN 60721-3-3, 3-1, 3-2
- Vibration per EN 60068-2-6 and Germanischer Lloyd
- Active L-force range, verified October 2026
- Audit status: OFFICIAL_VERIFIED
Package and Terms
- 1 × Lenze E94ASHE0864 drive module
- 1 × quick start guide
- Warranty: 12 months
- Dispatch: 12-24 hours
- Carriers: FedEx, UPS, DHL
Buying Guide
- Match the motor nameplate: 45 kW and 4 poles
- Confirm 400 V class supply on site
- Check cabinet heat budget for 1500 W loss
- Plan derating above +45 °C or above 1000 m
- Add the E94AZCUS adapter for USB setup
- Order only the E94AYC cards your line needs
FAQ
Q: How much current can this module deliver for a short burst?
A: Up to 172 A short-term, with a 2.0 overload factor.
Q: Do I need a mains choke with this drive?
A: No. Rated mains current stays at 79 A either way.
Q: What is the tallest point when mounting?
A: The fastening flange brings total height to 706 mm.
Q: Can one person install it?
A: No. At 42 kg, use two people or a lifting aid.
Q: From experience, what kills these drives early?
A: Poor cabinet airflow. The 1500 W loss needs steady ventilation, not a closed box.
Contact
Email: sales@powergearx.com
WhatsApp: +86 18030005825
Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
There are no reviews yet.