Name: DO910S ABB 3KDE175321L9100 Intrinsically Safe Digital Output
SKU: DO910S
Price: 256.00 USD
Availability: InStock

Product details

▸ ABB DO910S 3KDE175321L9100 – intrinsically safe digital output module for S900 I/O system.Controls valves and alarms in hazardous Zone 1 areas.
▸ Part of S900 remote I/O family – install directly in field, reduce marshalling costs.Communicates via PROFIBUS DP with control system.
▸ 4 channels for solenoid drivers, with short and break detection.Each channel electrically isolated from bus, power, and other channels.
▸ ATEX certified for Zone 1 – safe for explosive environments.Hot swap capable – replace without power interruption.

▸ DO = Digital Output module
▸ 9 = S900 I/O series
▸ 10 = Solenoid driver / alarm output function
- 4 channels intrinsically safe
- Short & break detection per channel
▸ S = Type S for Zone 1 hazardous areas
▸ Article number 3KDE175321L9100 – full identification

▸ Output specifications4 digital outputs, solenoid driver typeIntrinsically safe circuits
Integrated driving power
Short circuit and wire break detection
▸ Electrical isolationOutput / bus: isolatedOutput / power: isolated
Channel to channel: fully isolated
▸ Power & communicationPROFIBUS DP interfaceRedundancy supported for power and communication
Hot swap capable
▸ DiagnosticsExtended diagnostics via FDT/DTMHot Configuration in Run
Auto-diagnostics for easy maintenance

▸ Operating conditionsTemperature: -20 to +60 °CHumidity: 93% max at 40 °C
G3 coating for corrosive atmospheres (ISA-S71.04)
▸ Hazardous area approvalsATEX Zone 1 certifiedFor connecting field devices in Zone 0, 1, or 2
▸ ComplianceCE markedRoHS compliant (EU Directive 2011/65/EU)
WEEE Category: Small Equipment
▸ MechanicalDimensions: 20×104×104 mm (W×H×D)Weight: 0.135 kg
S900 mechanics format

▸ MountingSnap onto S900 backplane in Zone 1 areaCompact 20 mm width saves panel space
▸ Field wiringConnect intrinsically safe solenoids or alarmsAutomatic short/break detection
▸ System integrationPROFIBUS DP communication to control systemConfigure via FDT/DTM tools
▸ Redundancy readySupports redundant power and communication modules

▸ LED indicatorsChannel status, short circuit, wire breakModule status and communication
▸ Hot swapReplace module while system runsNo need to interrupt primary voltage
▸ Advanced diagnosticsDetailed fault data via DTMQuick troubleshooting

▸ In the box1× ABB DO910S digital output module1× product documentation
Mounting hardware included
▸ Warranty12 months against defects
▸ ShippingFedEx, UPS, DHL worldwide express

Q: What does the “S” in DO910S mean?A: “S” means Type S module for Zone 1 hazardous areas. It’s intrinsically safe and certified for explosive environments.
Q: Can I use this module for non-hazardous areas?A: Yes, it works in non-hazardous areas too. But you pay for intrinsic safety features you may not need. Consider standard modules for safe areas.
Q: What kind of field devices can I connect?A: Intrinsically safe solenoids, alarms, indicators. Each channel drives up to [check manual for current/power limits].
Q: How does short/break detection work?A: Module continuously monitors each channel. If short or open wire detected, LED lights up and diagnostic message sent to control system.
Q: Can I mix DO910S with other S900 modules?A: Yes. S900 system accepts digital input, output, analog modules together. All communicate on same PROFIBUS DP line.
Q: How do I select between DO910 and DO910S?A: Choose DO910S if you need Zone 1 hazardous location certification. For safe areas only, DO910 (non-S) costs less.