Name: Buy Bently Nevada 330703-000-100-10-02-00 | Long 100mm Case XL Probe
SKU: 330703-000-100-10-02-00
Price: 248.00 USD
Availability: InStock

Product details

Economical Long-Body XL Probe for General Use

This is part 330703-000-100-10-02-00, a cost-effective Bently Nevada 3300 XL probe. It offers a long 100mm case and standard triaxial cable. Perfect for deep mounting in non-hazardous industrial environments.

Value Proposition

Deep Mounting Solution: 100mm case reaches through thick machine walls.
Noise-Resistant Signal: Triaxial cable ensures reliable data in electrically noisy plants.
Standard Configuration: No special certifications, ideal for general manufacturing.
Trusted Quality: Original Bently Nevada part with a 12-month warranty.

Product Specifications

Exact Part Number: 330703-000-100-10-02-00
Product Family: Bently Nevada 3300 XL Series
Sensing Element: 11 mm Diameter
Mounting Thread: M14 x 1.5 mm
Physical Length: 100.0 mm full case length.
Integrated Cable: 1.0 meter, triaxial, 75 ohm.
DC Resistance: Stable at 5.9 Ω ± 0.5 Ω.
EMI Performance: Low susceptibility to 60 Hz magnetic fields.
Recommended Torque: 21.1 N•m (187 in•lb).
Thread Use Guidance: Max engagement of 21 mm.
Approvals: Standard industrial version (Option 00).
Operational Range: Broad -52°C to +177°C temperature tolerance.

Practical Installation Notes

Verify your mounting hole is deep enough for the 100mm probe body.
Always use a torque wrench. Do not exceed 63.3 N•m maximum.
This standard version is not for use in classified hazardous areas.
In cold climates, ensure ambient temperature stays above -34°C for long-term reliability.

Buyer’s Questions & Answers

This probe has a “00” approval option. Where can I use it?

Use it in standard industrial areas without explosive atmospheres. It is suitable for most factories, power plants, and water treatment facilities in non-hazardous zones.

Why choose a long 100mm case?

A long case is necessary when the probe must pass through a thick bearing housing, gearbox wall, or custom bracket to position the tip correctly near the shaft.

Does the triaxial cable require special connectors?

No, it uses the standard miniature coaxial ClickLoc connector. The triaxial design refers to the internal cable construction for better shielding.

Can this probe measure axial and radial vibration?

Yes. This 11mm probe is commonly used for both radial vibration and axial position (thrust) measurements on large rotating equipment.

What is your shipping and warranty policy?

We offer fast international shipping with FedEx, UPS, and DHL. Every probe is 100% new and covered by our 12-month quality guarantee against defects.