Bently Nevada330104-08-14-10-02-05 Probe | Metric 8mm Sensor for Machinery Monitoring

Product Overview: Premium Vibration Monitoring

This is the 3300 XL 8 mm Proximity Probe System from Bently Nevada. It is a high-precision sensor for industrial machinery. It measures radial vibration and position on rotating equipment. The probe ensures reliable monitoring in critical applications. It helps prevent unplanned downtime.

Model: 330104-08-14-10-02-05

Need a custom configuration or technical advice? Contact our experts: sales@powergearx.com or call +86 18030005825.

Detailed Technical Specifications

• Brand & Model
  • Manufacturer: Bently Nevada
  • Product Type: 3300 XL 8 mm Proximity Probes (Metric)
  • Full Part Number: 330104-08-14-10-02-05
• Physical Construction
  • Probe Thread: M10 x 1
  • Unthreaded Length: 80 mm
  • Overall Case Length: 140 mm
  • Total Cable Length: 1.0 meter (3.3 feet)
  • Case Material: AISI 303/304 Stainless Steel
  • Tip Material: Polyphenylene Sulfide (PPS)
  • Seal: Viton® O-ring
  • Weight: 323 g/m
• Electrical & Measurement Data
  • Linear Range: 0.25 to 2.3 mm (10 to 90 mils)
  • Recommended Gap (Radial): 1.27 mm (50 mils) for -9 Vdc
  • Nominal DC Resistance (RPROBE): 7.59 Ω ± 0.50
  • Connector: Miniature Coaxial ClickLoc
  • Max Field Wiring: 305 m (1000 ft) to monitor
• Environmental Ratings
  • Operating Temperature: -52°C to +177°C (Standard)
  • Extended Cable Temp: Up to +260°C
  • Relative Humidity: <3% ASF change at 93% for 56 days.
  • Ingress Protection: Sealed probe design.
• Certifications & Safety
  • Agency Approvals: CSA, ATEX, IECEx
  • Intrinsically Safe (ia) Option: For Zone 0 with proper barriers.
  • Non-incendive (nA, ec) Option: For Zone 2/Division 2.

Installation & Setup Guide

• Use a 15 mm maximum thread engagement in the mounting hole.
• Set the initial gap to achieve -9 Vdc for radial vibration monitoring.
• Use 16-24 AWG (0.2-1.5 mm²) shielded triad cable for field wiring.
• Ensure the probe tip is clean and undamaged before installation.
• Avoid exposing the probe to temperatures below -34°C before installation to protect the seal.

Compatibility & Integration

This probe works with Bently Nevada 3300 XL Proximitor Sensors. It connects via its ClickLoc connector. The system is compatible with standard monitoring frameworks. It fits most industrial machinery with M10 mounting ports.

Packaging, Shipping & Warranty

• Package Includes: One 3300 XL 8mm Probe, documentation.
• Warranty: 12-month limited warranty on materials and workmanship.
• Global Shipping: We ship worldwide via FedEx, UPS, and DHL.

Typical Applications & Diagnostic Power

• Application Scenarios:
  • Continuous vibration monitoring on turbines, compressors, and pumps.
  • Shaft radial vibration and position measurement.
  • Predictive maintenance programs in oil & gas, power generation, and manufacturing.
• Diagnostic Capability:
  • Detects early-stage bearing wear, imbalance, and misalignment.
  • Provides a stable -1 to -17 Vdc signal proportional to gap change.
  • Long-distance signal integrity supports remote monitoring setups.

Frequently Asked Questions (FAQ)

• What is the best gap for this probe?Set the gap to about 1.27 mm. This gives a -9 Vdc output. It is the standard for radial vibration.
• Can I use this in a hazardous area?Yes. The probe has ATEX and IECEx approvals. You must pair it with certified intrinsic safety barriers.
• What is the probe’s temperature limit?The standard probe works from -52°C to +177°C. The cable can handle up to 260°C in extended range models.
• How do I choose the right cable length?Select a length that reaches your monitor with some slack. Remember, longer cables may reduce high-frequency response.
• Is the probe pressure sealed?It has a Viton O-ring seal. It is not pressure tested before shipping. Contact us for special pressure testing needs.
• Why is my signal unstable?Check the cable and connector for damage. Ensure the target surface is clean and conductive. Verify the gap setting.

How to Choose the Right Probe

• Confirm your machine’s thread size is M10x1.
• Measure the required physical length from mounting point to the target.
• Check if your application needs CSA, ATEX, or IECEx certifications.
• Consider the ambient temperature. Choose the extended temperature model if over 177°C.
• Ensure your monitoring system is compatible with 3300 XL probe signals.

Unsure about your needs? Reach out for personalized support: sales@powergearx.com or +86 18030005825.

Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
Partner: PLCDCS HUB Limited https://plcdcshub.com/