Bently Nevada 330881-16-04-132-03-02 PROXPAC XL Proximity Transducer

Bently Nevada 330881-16-04-132-03-02 PROXPAC XL Proximity Transducer

• Made in U.S.A
• IP66 housing for harsh sites
• 1 m probe cable / ClickLoc connector
• 12-month warranty
• FedEx / UPS / DHL shipping
• Contact: sales@powergearx.com / +86 18030005825

Suffix Tree Reference

330881-16-04-132-03-02
 ├─ 16 : 8 mm probe, no approvals
 ├─ 04 : 40 mm standoff adapter
 ├─ 132: 132 mm penetration depth
 ├─ 03 : M20 fitting + 2 plugs
 └─ 02 : 3/4-14 NPT mount thread

Core Technical Points

• Weight: 1.44 kg
• Housing: PPS with conductive fibers
• Outer Sleeve: AISI 303 stainless steel
• Probe Case: AISI 304 stainless steel
• Connector: Gold-plated ClickLoc
• Probe Cable: 75 Ω triaxial FEP
• Tensile Limit: 330 N

Electrical & Performance

• Power: -17.5 Vdc to -26 Vdc
• Load: 12 mA max
• Output Resistance: 50 Ω
• Field wiring: 0.2 to 1.5 mm² (16-24 AWG)
• Max wiring length: 305 m
• Linear Range: 2 mm
• Scale Factor: 7.87 V/mm ±5%
• Recommended Gap: 1.27 mm

Environmental Limits

• Operating Range: -51°C to +177°C
• Shock Tested: 4 J certified, 7 J sample test
• Housing Strength: 912 N load hold
• UV-resistant PPS enclosure

Product Benefits

• Stable gap reading at long wiring distance
• Good performance in thermal drift zones
• Soft silicone isolation for vibration
• Gold connector reduces noise pickup

Warranty & Delivery

• Warranty: 12 months
• Packing: shock-safe industrial case
• Delivery: FedEx / UPS / DHL worldwide

FAQ

Q: Can this model run with long cable routing in older plants?

A: Yes. It supports up to 305 m wiring if shielding and grounding are correct.

Q: Is extra heat shielding needed near turbines?

A: Only if exposure exceeds the upper temperature limit for long periods.

Q: What causes most signal drift in field use?

A: Poor gap set and ground loops. Recheck spacing first.

Q: Is thread sealing important in dusty rooms?

A: Yes. A loose thread can cause micro-ingress and weaken readings.

Q: What is the fastest install improvement step?

A: Confirm torque on sleeve locknut before wiring alignment.

Contact & Support

• Email: sales@powergearx.com
• WhatsApp: +86 18030005825
• Partner: Ubest Automation Limited

Copyright © 2025 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/