Bently Nevada 330709-000-030-10-02-05 | Ultra-Short 30mm 11mm Vibration Probe 1m Cable

Space-Saving Vibration Monitoring Solution

The Bently Nevada 330709-000-030-10-02-05 delivers professional-grade vibration sensing in a minimal package. Combining the industry’s shortest 30mm case with a practical 1-meter cable, this probe is engineered for installations where clearance is critical and control panels are nearby.

Key Benefits

• Extreme Space Optimization: 30mm body length fits the shallowest mounting locations
• Clean Panel Integration: 1.0-meter cable eliminates excess wiring clutter
• Proven Connection System: Standard ClickLoc connector ensures reliable signal transmission
• Industrial-Grade Construction: Stainless steel housing with chemical-resistant PPS tip
• Global Compliance Ready: Manufactured with multiple international safety approvals

Technical Specifications

• Manufacturer: Bently Nevada
• Product Series: 3300 XL 11 mm Proximity Probes
• Complete Part Number: 330709-000-030-10-02-05
  • 330709 – Base Probe: 11mm Diameter, M16x1.5 Thread
  • 000 – Unthreaded Section: 0 mm
  • 030 – Overall Case Length: 30 mm
  • 10 – Total Cable Length: 1.0 metre
  • 02 – Connector Type: Miniature Coaxial ClickLoc
  • 05 – Agency Approvals: Multiple Certifications
• Electrical Characteristics
  • DC Resistance (1m cable): 5.9 ± 0.5 Ohms
  • Cable Specification: 75 Ω Triaxial, FEP Insulation
  • Minimum Target Surface: 30.5 mm diameter flat area
  • Recommended Shaft Size: 152 mm minimum diameter
• Mechanical Properties
  • Case Material: AISI 304 Stainless Steel
  • Tip Material: Polyphenylene Sulfide (PPS)
  • Mounting Thread: M16 x 1.5
  • Recommended Installation Torque: 21.1 N•m
  • Maximum Connector Torque: 0.565 N•m (Finger tight)
  • Cable Bend Radius: Minimum 25.4 mm
• Environmental Ratings
  • Operating Temperature Range: -52°C to +177°C
  • Seal Protection Note: Avoid prolonged exposure below -34°C
  • Safety Classifications: Complies with EPL Ga, Gc, Dc requirements

Installation Instructions

• Verify mounting hole provides minimum 24mm thread engagement
• Clean threads and install probe to 21.1 N•m torque specification
• Connect cable connector by hand – do not use tools
• Route cable with gentle bends exceeding 25.4mm radius
• Ensure target surface is clean and meets minimum size requirements

System Compatibility

Designed specifically for integration with Bently Nevada 3300 XL monitoring systems. This configuration is ideal for compact machinery, OEM skids, and applications where the monitoring module is mounted in close proximity to the measurement point. For monitoring smaller rotating components, consider the 3300 XL 8mm Proximity Probe.

Purchase & Support Information

• Certifications: Includes multiple international agency approvals (Option 05)
• Package Contents: One proximity probe ready for installation
• Quality Assurance: Backed by comprehensive 12-month product warranty
• Shipping Options: Available for express delivery via FedEx, UPS, and DHL

Expert FAQ Section

Technical Specifications

• How does the 30mm case length compare to standard probes?
  Standard probe cases are typically 40mm, 50mm or longer. The 30mm case on the 330709-000-030-10-02-05 represents the shortest available option, providing maximum clearance in constrained spaces.
• What is the significance of the 5.9 ± 0.5 Ohm resistance specification?
  This resistance value is critical for system calibration. The monitor expects this specific range for accurate gap-to-voltage conversion and proper vibration measurement.

Application Guidance

• Where would I typically use this specific configuration?
  The 330709-000-030-10-02-05 excels in packaged equipment like compressors or pumps where housing thickness is minimal and the local control panel is within 1 meter distance.
• Can this probe be used in vertical downward mounting orientations?
  Yes, the probe can be mounted in any orientation. For downward mounting, ensure the cable has proper strain relief to prevent stress on the electrical connection.

Purchasing & Logistics

• What documentation accompanies the probe?
  Each 330709-000-030-10-02-05 ships with technical data specifying resistance values and calibration information needed for proper system setup and maintenance records.

Ordering & Contact Information

For pricing, stock availability, or technical consultation regarding the Bently Nevada 330709-000-030-10-02-05:
Email: sales@powergearx.com
Phone/WhatsApp: +86 18030005825

Technology Partner: Oiltech Controls Limited
Automation Partner: PLCDCS HUB Limited

Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/