Product details
Product Description: Precision for Your Machinery
This is the Bently Nevada 3300 XL 8mm Proximity Probe. It is a key tool for machine health. The probe measures vibration and position with high accuracy. It helps prevent unexpected downtime in your plant. Model 330104-02-19-10-01-00 comes ready for tough industrial duty. Its robust design handles heat, cold, and humidity. Need help selecting the right sensor? Our engineers can guide you. Contact us at sales@powergearx.com or +86 18030005825 on WhatsApp.
Core Features & Benefits
- Accurate Vibration Data: Get reliable 2mm linear range for precise monitoring.
- Built to Last: Stainless steel case and PPS tip resist wear and chemicals.
- Wide Operating Range: Works from -52°C to +177°C, even in extreme conditions.
- Easy to Install: Standard M10 x 1 thread allows for simple, secure mounting.
- Safe for Hazardous Areas: Certified for use in Zone 0/2 with proper barriers.
- Long-Distance Signal: Connect up to 305 meters to your monitoring system.
Detailed Technical Specifications
- Brand: Bently Nevada
- Product Series: 3300 XL Proximity Probes
- Full Part Number: 330104-02-19-10-01-00
- 330104: 8 mm Probe, M10 x 1 Thread, Armored
- Option 02: Unthreaded Shank Length = 20 mm
- Option 19: Overall Case Length = 190 mm
- Option 10: Total Cable Length = 1.0 Meter
- Option 01: ClickLoc Connector with Protector
- Option 00: No Agency Approval Required
- Measurement Performance
- Linear Range: 0.25 mm to 2.3 mm from target
- Recommended Gap: 1.27 mm (for -9 Vdc output)
- Probe Resistance: 7.59 Ohms ± 0.50 Ohms
- Frequency Response: Suitable for most vibration analysis.
- Sensitivity & Linearity: Stable across the full range.
- Physical & Environmental Data
- Tip Material: Polyphenylene Sulfide (PPS) – Non-conductive
- Case Material: AISI 303/304 Stainless Steel
- Thread: M10 x 1.0 mm
- Max Thread Engagement: 15 mm
- Seal: Viton O-ring for pressure differential
- Operating Temp: -52°C to +177°C (Standard)
- Humidity: <3% signal change at 93% RH for 56 days
- Certifications & Safety (When installed per Bently Nevada drawings)
- Intrinsic Safety (ia): AEx/Ex ia IIC T5…T1 Ga
- Non-Incendive (nA, ec): For Class I, Zone 2 / Div 2
- Groups: A, B, C, D, E, F, G compliant
Simple Installation Guide
- Use the M10x1 thread to mount the probe in your prepared hole.
- Do not engage more than 15 mm of thread.
- Aim for a gap of about 1.27 mm between the probe tip and the shaft.
- This gap should give you a voltage near -9 Vdc.
- Use good quality shielded cable for the field wiring.
Maintenance & Troubleshooting Tips
- This probe needs very little routine care.
- Check the gap voltage now and then to ensure it stays steady.
- Look at the cable and connector for any cuts or cracks.
- If stored below -34°C, inspect the seal before using it.
- A sudden change in signal often points to a cable problem.
What This Probe Works With
- It connects directly to Bently Nevada 3300 XL Proximitor modules.
- The ClickLoc connector makes the link secure and quick.
- It is the standard sensor for many vibration monitoring systems.
Where To Use This Probe
- Monitor radial vibration on turbines, fans, and compressors.
- Measure axial position (thrust) on large machines.
- Create a Keyphasor signal for tracking shaft speed and phase.
- Use in oil & gas, power plants, and water treatment facilities.
- It is a core part of any predictive maintenance program.
Frequently Asked Questions
Understanding the Specifications
- What does “linear range” mean for this probe?
- It is the distance where the output voltage changes in a straight line with gap. For this probe, that’s from 0.25mm to 2.3mm.
- Can I use it in a very hot location?
- Yes. The standard probe works up to 177°C. The cable can handle even higher temperatures.
- What is the probe’s resistance, and why does it matter?
- It is about 7.6 Ohms. The monitoring system uses this value for accurate calibration.
Practical Advice from Experience
- How do I know if my installed gap is correct?
- Use a feeler gauge to set the physical gap near 1.27mm. Then check the voltage reads close to -9 Vdc.
- The signal is noisy. What should I check first?
- Always check the cable and connections. Poor shielding or a damaged cable is the most common cause of noise.
- Should I order extra cable length?
- We suggest ordering the exact length you need. Excess cable must be coiled carefully to avoid signal issues.
Ordering and Getting Support
- What do I receive when I order?
- You get one proximity probe with its ClickLoc connector and a protective cap.
- Is there a warranty?
- Yes. We provide a solid 12-month warranty on this product.
- How will my order arrive?
- We ship quickly using trusted carriers like FedEx, UPS, or DHL.
- I need a different configuration. Can you help?
- Absolutely. We can source various Bently Nevada probes. Message us with your requirements.
For more details or to discuss your application, please reach out. Email sales@powergearx.com is the best way to start.
Partner: PLCDCS HUB Limited
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
There are no reviews yet.