Product details
Product Overview
Powergear X Automation presents the Bently Nevada 330102-00-28-05-02-00. This is a 3300 XL series proximity probe. It measures shaft vibration and position. It is vital for protecting rotating machinery.
Key Specifications & Ordering Code
- Full Model: Bently Nevada 330102-00-28-05-02-00
- Series: 3300 XL 8mm Proximity Probe
- Linear Range: 2 mm (80 mils) measurement
- Gap Setting: Recommended -9 Vdc (approx. 1.27mm)
- Cable Length: 0.5 meter (1.6 feet) standard
- Connector: Miniature coaxial ClickLoc type
- Thread: 3/8-24 UNF for secure mounting
- Case Length: 2.8 inches overall
- DC Resistance: 7.45 Ω ± 0.50 at 0.5m
Material & Construction
- Probe Tip: Durable Polyphenylene sulfide (PPS)
- Probe Case: AISI 303/304 Stainless Steel
- Seal: Viton® O-ring for pressure differential
- Weight: 323 g/m (11.4 oz per meter)
Environmental Ratings
- Temperature: -52°C to +177°C standard operation
- Extended Tip: Up to +218°C available
- Humidity: <3% ASF change at 93% RH
- Field Wiring: Up to 305 meters maximum
- Safety Ratings: Class I, Zone 0/2 (AEx/Ex ia/nA/ec)
Ordering & Support Information
- Warranty: 12-month manufacturer warranty
- Shipping: Fast global delivery via FedEx, UPS, DHL
- Part Number Breakdown:
330102 = Base 8mm Probe
-00 = 0 in Unthreaded Length
-28 = 2.8 in Case Length
-05 = 0.5 meter Cable
-02 = ClickLoc Connector
-00 = No Agency Approval
- Contact: sales@powergearx.com
- Phone/WhatsApp: +86 18030005825
FAQ – Selection & Installation
- What is the target material for this probe?
The 330102-00-28-05-02-00 works best with steel. The target should be magnetic and electrically conductive. - Can I cut or extend the 0.5 meter cable?
No. The cable length is factory-set. Cutting it changes the electrical tuning. Order the correct length from stock. - How do I set the correct gap voltage?
Adjust the probe position while monitoring the DC voltage. Set it to the recommended -9 Vdc for radial vibration. - Is this probe suitable for high-pressure applications?
The seal handles differential pressure. But probes are not pressure-tested before shipping. Contact Bently for special testing. - What is the difference between standard and extended temperature probes?
Standard works to +177°C. Extended range probes handle up to +218°C at the tip. Choose based on your machine temperature.
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
Partner: Ubest Automation Limited
There are no reviews yet.