Product details
Product Overview
The Bently Nevada 3300 XL 8mm Proximity Probe delivers reliable machinery health data. This sensor is built tough with an 8mm stainless steel case. It features patented TipLoc and CableLoc technology for superior durability. Use it to monitor vibration and position on critical rotating equipment. It helps prevent unplanned downtime in demanding industrial environments.
Part Number Breakdown
Understand your probe’s configuration with this suffix tree for model 330101-29-52-10-02-00.
- 330101 – 3300 XL 8 mm Probe, 3/8-24 UNF, no armor
- 29 – Unthreaded Length: 2.9 inches
- 52 – Overall Case Length: 5.2 inches
- 10 – Cable Length: 1.0 meter (3.3 feet)
- 02 – Connector: Miniature coaxial ClickLoc
- 00 – Agency Approval: Not required
Key Technical Data
- Brand & Model: Bently Nevada 3300 XL 8mm
- Measurement Range: 2.0 mm (80 mils) linear range
- Sensitivity (Scale Factor): 7.87 V/mm (200 mV/mil) ±5%
- Linearity (DSL): Better than ±0.025 mm (±1 mil)
- Recommended Gap: 1.27 mm (50 mils) for -9 Vdc
- Frequency Response: Supports long cable runs up to 305 meters.
- Temperature Range: -52°C to +177°C (-62°F to +350°F)
- Environmental Rating: Resists high humidity and physical abuse.
- Interference Resistance: Use shielded triad cable for best results.
- Probe Resistance: 7.59 Ω ± 0.50 Ω
- Case Material: AISI 303/304 Stainless Steel
- Tip Material: Rugged PPS Plastic
Installation & Setup Guide
- Mount using the 3/8-24 UNF threads.
- Do not exceed 0.563 inches of thread engagement.
- Apply 11.2 N•m (100 in•lbf) torque to the case.
- For the first three threads, use 7.5 N•m (66 in•lbf).
- Adjust the probe to achieve a -9 Vdc gap voltage.
- Use proper shielded field wiring for optimal signal integrity.
Reliability & Compatibility
- Easy to Maintain: Robust design needs minimal service.
- Simple Calibration: Easy gap setting and voltage check.
- System Compatible: Works with Bently Nevada 3300 XL monitors.
- Cable Options: Pair with standard or FluidLoc extension cables.
Certifications & Package
- Safety Certifications: Options for EPL Ga, Gc, Dc available.
- Package Includes: One (1) 3300 XL 8mm Probe.
- Quality Warranty: Backed by a 12-month limited warranty.
- Fast Shipping: We ship worldwide via FedEx, UPS, and DHL.
Where to Use This Probe
- Measure radial vibration on gas and steam turbines.
- Monitor axial thrust position in large compressors.
- Track shaft vibration on critical motors and pumps.
- Enable predictive maintenance and fault diagnosis.
Frequently Asked Questions
This probe has a long case. When should I use it?
Choose this model (-52 suffix for 5.2″ case) when you need to mount through a thick machine casing or housing.
What is the benefit of the patented designs?
TipLoc prevents the tip from separating. CableLoc ensures the cable won’t pull out, even with 75 lbf force.
My environment is very oily. Is this probe suitable?
The standard probe has a seal. For severe oil ingress risk, specify the FluidLoc cable option when ordering.
How do I avoid damaging the probe during installation?
Never exceed the recommended torque. Avoid side-loading the probe tip against the target shaft.
Can I cut or splice the cable if it’s too long?
No. Cutting the integral cable will ruin the probe. Always order the correct cable length suffix for your needs.
How do I know if my old probe needs replacement?
Check the gap voltage. If it drifts significantly or you see physical damage, replacement is recommended.
Expert Support & Ordering
Need help selecting the right model? Our engineers provide free technical support.
Email: sales@powergearx.com
WhatsApp: +86 18030005825
Trusted Distribution Partners:
Oiltech Controls Limited
PLCDCS HUB Limited
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
There are no reviews yet.