Over 50,000 hot-selling automation module components.

ATV930D55N4C Schneider Altivar 930 55 kW Drive

0 Reviews
In stock
  • 100% genuine products in stock with fast delivery.
  • 30-day return policy for quality assurance.
  • 12-month warranty for peace of mind.
SKU: ATV930D55N4C
Brands:

Product details

ATV930D55N4C: 55 kW Variable Speed Drive from Schneider Electric

The ATV930D55N4C is a three-phase variable speed drive in the Altivar Process ATV930 series from Schneider Electric. It delivers 55 kW in normal duty and 45 kW in heavy duty. This wall-mounting unit runs on 380 to 480 V supply. It comes in an IP21/UL Type 1 enclosure. No braking unit is built in. You need an external braking unit for braking tasks. The drive fits pumps, fans, conveyors, and other industrial machines.

Technical Specifications

  • Brand: Schneider Electric
  • Model: ATV930D55N4C
  • Series: Altivar Process ATV930
  • Product type: Three-phase variable speed drive, wall-mounting, no built-in braking unit
  • Motor power (ND): 55 kW (75 HP), 120% overload for 60 s
  • Motor power (HD): 45 kW (60 HP), 150% overload for 60 s
  • Supply voltage: 380 to 480 V three-phase, -15%/+10%, 50/60 Hz
  • Output frequency: 0.1 to 599 Hz
  • Switching frequency: 2.5 kHz nominal, with automatic derating above this level
  • Continuous output current (ND): 106 A
  • Transient output current (ND): 127.2 A for 60 s
  • Continuous output current (HD): 88 A
  • Transient output current (HD): 132 A for 60 s
  • Input current (ND): 97.2 A at 380 V, 84.2 A at 480 V
  • Input current (HD): 81.4 A at 380 V, 71.8 A at 480 V
  • Apparent power: 70.0 kVA (ND) / 59.7 kVA (HD) at 380 V
  • Motor control: Open and closed loop vector control for async, PM, and synchronous reluctance motors
  • Short-circuit rating: 50 kA SCCR
  • EMC filter: Category C3 integrated
  • Safety: STO function, SIL3 / Cat. PL e

I/O and Communication

  • Analog inputs: 3 total (2 voltage/current with probe input, 1 bipolar)
  • Digital inputs: 8, 24 V DC, positive or negative logic
  • Digital output: 1, configurable as pulse train output
  • Analog outputs: 2, voltage or current
  • Relay outputs: 3 (1 NO/NC + 2 NO)
  • Safety inputs: 2 for STO
  • Expansion: Up to 3 I/O modules
  • Built-in ports: 1 Ethernet dual-port switch (RJ45), 1 Modbus serial port (RJ45)
  • Protocols: EtherNet/IP, Modbus TCP, Modbus RTU
  • Fieldbus slot: 1 slot for PROFINET, PROFIBUS DP V1, CANopen, DeviceNet, EtherCAT, or POWERLINK
  • Cybersecurity: Achilles Level 2 certified

Environmental and Physical Data

  • Operating temperature: -15 to +50 °C standard, derating up to 60 °C
  • Storage temperature: -40 to +70 °C
  • Humidity: 5 to 95%, non-condensing
  • Altitude: No derating up to 1000 m, then 1% per 100 m up to 3000 m
  • Environmental class: 3C3 / 3S3 / 3M3
  • Protection rating: IP21 / UL Type 1
  • Dimensions (H x W x D): 922 x 290 x 325.5 mm
  • Weight: 56.500 kg (124.561 lb)
  • Power dissipation: 1228 W (ND) / 919 W (HD) at nominal load
  • Minimum air flow: 295 m³/h

Installation Guide

  • Mount the drive vertically on a solid wall.
  • Keep 100 mm clearance above and below the unit.
  • Keep 10 mm clearance at the front.
  • Tighten power terminals to 25 N·m.
  • Use the correct cable size for 97.2 A input current.
  • Connect an external braking unit when braking is needed.
  • Check airflow at 295 m³/h for full load.

Setup and Maintenance

  • Set motor data with the built-in keypad or software tools.
  • Pick ND or HD rating to match your load profile.
  • Use the dual Ethernet port for simple daisy-chain wiring.
  • Check fans and heat sinks at each service interval.
  • Read fault codes on the display for fast fixes.
  • Update firmware through the Ethernet port.

Compatibility Notes

  • Works with asynchronous, permanent magnet, and synchronous reluctance motors.
  • Supports open-loop and closed-loop control with an encoder.
  • Fits PROFINET, EtherCAT, CANopen, and other networks with one option module.
  • Adds up to 3 I/O modules for more signals.
  • Pairs with external braking units and resistors.
  • Integrates with plant control through EtherNet/IP and Modbus TCP.

Certifications

  • UL 508C and UL 61800-5-1
  • EN/IEC 61800-3 (category C2/C3)
  • EN/IEC 61800-5-1
  • IEC 61508 and ISO 13849-1 for STO
  • Achilles Level 2
  • REACH and SEMI F47-0706

Package Contents

  • 1 x ATV930D55N4C drive
  • 1 x printed installation manual
  • 1 x safety information sheet
  • Terminal hardware as shipped by Schneider Electric

FAQ

  • Does this drive include a brake chopper?
    No. You must add an external braking unit for braking.
  • Can I run a 55 kW motor in heavy duty?
    The heavy duty rating is 45 kW. Use normal duty for 55 kW loads.
  • What is the overload capacity?
    Normal duty gives 120% for 60 s. Heavy duty gives 150% for 60 s.
  • How do I connect to a plant network?
    Use the two RJ45 Ethernet ports for EtherNet/IP or Modbus TCP.
  • Is single-phase input possible?
    No. This model needs three-phase 380 to 480 V supply.
  • What do field engineers check first on a tripped drive?
    They read the fault code, then check motor load and cooling airflow.
  • How much space does the drive need around it?
    Leave 100 mm above and below and 10 mm in front.
  • Can I add more I/O later?
    Yes. The drive accepts up to 3 extra I/O modules.
  • What is the highest output frequency?
    It reaches 599 Hz.
  • Does altitude affect the rating?
    Yes. Above 1000 m, current drops 1% per 100 m.
  • What do experienced installers do before first start?
    They verify terminal torque, motor data, and rotation direction.
  • How do maintenance teams cut downtime?
    They log fault codes and clean heat sinks on a fixed schedule.

Specifications

  • BrandAllen-Bradley
  • Part Number22A-B012F104
  • ConditionOriginal Brand New

Customers Reviews

There are no reviews yet.

Be the first to review “ATV930D55N4C Schneider Altivar 930 55 kW Drive”

Your email address will not be published. Required fields are marked *

Back to Top
Product has been added to your cart