ATEX/IECEx Bently Nevada 330709-000-040-10-12-05 Probe | Certified 3300 XL 11mm Hazardous Area Sensor

Certified Compact Sensor for Demanding Areas

This is the Bently Nevada 3300 XL 11 mm Proximity Probe, built for certified performance. It combines a short 40mm case, a 1-meter FluidLoc cable, and carries multiple safety approvals. It is the ideal choice for compact, hazardous area installations requiring official certification and fluid resistance.

Why Choose This Model?

• Pre-Certified for Safety: Ships with multiple international agency approvals (ATEX/IECEx likely), speeding up your project.
• Compact & Robust: 40mm short case fits tight spaces; stainless steel body ensures durability.
• Fluid-Resistant: FluidLoc cable protects against moisture, oils, and chemicals in harsh environments.
• Neat Installation: 1.0 meter cable minimizes excess wire in control panels or packaged units.
• Direct Replacement: Genuine part for certified Bently Nevada 3300 XL systems.

Model Number Breakdown

• Manufacturer: Bently Nevada
• Complete Part Number: 330709-000-040-10-12-05
  • 330709: 11mm Probe, M16x1.5
  • 000: 0 mm Unthreaded
  • 040: Case Length = 40 mm
  • 10: Cable Length = 1.0 meter
  • 12: ClickLoc + FluidLoc Cable
  • 05: Multiple Approvals
• Product Line: 3300 XL Proximity Probes
• Origin: Made in USA

Technical Specifications at a Glance

• Electrical Data:
  • Cable: 75Ω Triaxial, FEP FluidLoc
  • Length: 1.0 meter (3.3 feet)
  • DC Resistance (RPROBE): 5.9 Ω ± 0.5 Ω
• Physical Data:
  • Body: AISI 304 Stainless Steel
  • Tip: Polyphenylene Sulfide (PPS)
  • Mounting: M16 x 1.5 Thread
  • Max Thread Engagement: 24 mm
  • Torque (Rec.): 21.1 N·m (187 in·lb)
  • Min Bend Radius: 25.4 mm
• Application Limits:
  • Min Target Size: 30.5 mm flat surface
  • Min Shaft Size: 152 mm diameter
• Environmental Limits:
  • Temp Range: -52°C to +177°C
  • Seal Warning: Avoid below -34°C
  • Certifications: Complies with EPL Ga, Gc, Dc standards.

Quick Installation Guide

• Install in an M16x1.5 hole. Use up to 24 mm of thread.
• Tighten the probe case to 21.1 N·m using a torque wrench.
• Connect the ClickLoc connector by hand. It is finger-tight only.
• Route the short FluidLoc cable carefully. Avoid sharp bends.

Compatibility & Options

This probe is fully compatible with Bently Nevada 3300 XL systems. Its certifications make it suitable for regulated plants. For applications with smaller shafts that also require certification, please inquire about options for 3300 XL 8mm Proximity Probes.

What’s Included & Support

• One (1) Certified Bently Nevada Probe, P/N 330709-000-040-10-12-05.
• 12-Month Manufacturer’s Warranty.
• Express Shipping: Available via FedEx, UPS, and DHL for urgent needs.

Expert FAQs

• Q: What specific approvals does the “05” option include?
• A: Typically, it includes ATEX and IECEx markings for use in explosive atmospheres. The exact markings are on the probe label. Always verify they match your plant’s required certification.
• Q: Why pair a short 1m cable with a FluidLoc jacket?
• A> This is ideal for compact, certified equipment (like compressor skids) in wet areas. The short cable reduces clutter, while FluidLoc protects against condensation or fluid sprays near the probe.
• Q: Can this certified probe be used in a non-hazardous area?
• A: Yes, absolutely. The certifications do not limit its use. It performs identically to a non-certified probe but meets higher safety standards, offering greater flexibility.
• Q: Is the installation torque different for certified probes?
• A: No. The mechanical installation specifications, including the 21.1 N·m torque, are the same regardless of the certification option.
• Q: How do I ensure I get the correct certified part for my site?
• A: Provide your site’s explosion protection document or the required certification codes (e.g., ATEX II 2G Ex ia IIC T4) to our team. We will verify this model matches. All certified probes come with a 12-month warranty and ship via DHL, FedEx, or UPS.

For certification verification or to order: Contact us at sales@powergearx.com or +86 18030005825 on WhatsApp.

Partner Companies: Oiltech Controls Limited | PLCDCS HUB Limited

Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/