Product details
Rugged & Certified: Bently Nevada 8mm Hazardous Area Probe
This Bently Nevada 3300 XL 8mm Probe is built for tough and safe operations. It combines the robust 8mm design with major safety certifications. This includes CSA, ATEX, and IECEx approvals for use in hazardous locations. Its long 5.0-inch case is perfect for deep mounting applications. Get reliable vibration monitoring where safety standards are critical.
Decode Your Part Number: 330101-29-50-10-02-05
- ➜ 330101: Core 8mm Probe (3/8-24 UNF, No Armor)
- ├─ 29: Unthreaded Shank = 2.9 inches
- ├─ 50: Total Case Length = 5.0 inches
- ├─ 10: Cable Length = 1.0 meter
- ├─ 02: ClickLoc Coaxial Connector
- └─ 05: CSA, ATEX, IECEx Approved
Essential Performance Data
- Maker & Model: Bently Nevada 3300 XL 8mm
- Linear Range: 2.0 mm (80 mils)
- Scale Factor: 7.87 V/mm (200 mV/mil) ±5%
- Linearity Error: < ±0.025 mm (±1 mil)
- Best Gap: Set to 1.27 mm (50 mils) / -9 Vdc
- Probe Resistance: 7.59 Ω ± 0.50 Ω
- Temp Range: -52°C to +177°C (-62°F to +350°F)
- Seal Type: Viton® O-Ring for pressure
- Safety Certs: CSA, ATEX, IECEx (Suffix -05)
- Body Material: 303/304 Stainless Steel
Quick Installation Notes
- Use the 3/8-24 UNF thread for mounting.
- Maximum thread engagement is 0.563 inches.
- Apply 11.2 N•m (100 in•lbf) maximum torque.
- Always set the gap voltage to the recommended -9 Vdc.
- Connect using approved shielded cable systems.
Key Features & Benefits
- Hazardous Area Ready: Full certifications for global use in classified zones.
- Extra-Long Case: 5.0-inch length fits thick machine housings.
- Ultra-Durable: Patented TipLoc and 8mm body resist impact and stress.
- Stable Signal: High accuracy and low drift in harsh environments.
- Easy Integration: Direct compatibility with 3300 XL monitoring systems.
Order with Confidence
- What You Get: One certified and ready-to-install probe.
- Our Promise: Backed by a solid 12-month warranty.
- Fast Dispatch: Shipped globally via FedEx, UPS, and DHL.
- Expert Support: Contact us for technical help or custom needs.
Email: sales@powergearx.com
Chat on WhatsApp: +86 18030005825
Professional FAQ: Hazardous Area Probes
What do the CSA, ATEX, and IECEx approvals mean for me?
These approvals mean this 330101-29-50-10-02-05 probe is tested and certified. It is safe for use in potentially explosive atmospheres, as defined by Canadian, European, and International standards.
Why is the case so long (5.0 inches)?
The long 5.0-inch case (suffix -50) is necessary to mount through deep bearing housings or casings. It ensures the sensing tip reaches the correct position near the shaft.
Can I install this probe myself in a hazardous area?
No. Installation in a certified hazardous area must be performed by qualified personnel. They must follow all local regulations and the system’s control drawing.
Does the certification affect the probe’s performance?
No. The safety certification (suffix -05) does not change the electrical specs. It only adds the formal approvals for use in dangerous locations.
What if I need a different cable length for my hazardous area setup?
You must order the correct model with your needed cable length suffix. The integral cable cannot be cut or extended in the field without voiding the certification.
Global Supply Partners:
Oiltech Controls Limited •
PLCDCS HUB Limited
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
There are no reviews yet.