Over 50,000 hot-selling automation module components.

Allen-Bradley 1790-T8A0X Input Module | CompactBlock DeviceNet

0 Reviews
13 in stock

Allen-Bradley 1790-T8A0X AC input module, 8 inputs, DeviceNet, 120VAC, 3W, NEMA Type 1, fast install, 12-month warranty, shipped by FedEx/UPS/DHL.

  • 100% genuine products in stock with fast delivery.
  • 30-day return policy for quality assurance.
  • 12-month warranty for peace of mind.
SKU: 1790-T8A0X

Product details

Allen-Bradley 1790-T8A0X CompactBlock LDX Input Module

1790-T8A0X is a digital expansion module for DeviceNet systems. It supports 120VAC input, 8 points, and simple fixed screw terminals. Made for fast installs in small panels.

Author: Powergear X Automation

Key Operating Data

  • Input rating: 120VAC nominal
  • Current draw: 10 mA max each channel
  • Power usage: 3W at 132VAC
  • Input range: 85 to 132VAC
  • Off-state level: 45VAC max
  • Input delay: 10 ms (Off to On) / 30 ms (On to Off)
  • Input impedance: 18 kΩ
  • Indicators: 8 green LEDs
  • Housing: NEMA Type 1
  • Isolation: 1250VAC I/O to logic

Extra Technical Values (Added)

  • Noise immunity: 2 kV surge rated typical
  • Maximum wiring length: 100m recommended shielded
  • Field fuse: 1A / 250VAC normal blow
  • Mounting: DIN rail / panel adapter
  • Power dissipation limit: 1.2W @ 28.8VDC (DeviceNet supply)

Wiring & Setup

  • Terminal type: M3 screw block, 7 lb-in torque
  • Wiring type: Copper or copper-clad conductors only
  • Setup: Rotary switch or ESD configuration files
  • Compatible PLCs: PLC, SLC, Logix, SoftLogix

Logistics & Warranty

  • Shipping options: FedEx, UPS, DHL
  • Standard warranty: 12 months
  • Condition: Tested, cleared, ready to run

Contact & Support

FAQ Section

Q1: Does this module support fast field troubleshooting?

A: Yes. Field users confirm LED indicators help isolate channel issues without full system shutdown.

Q2: Can it run in old cabinets with mixed I/O?

A: Yes. Integrators often mix this device with legacy AC blocks during phased upgrades.

Q3: Does it need shielding for long cable runs?

A: In most industrial plants, shielded cable is preferred to limit noise from motors and VFDs.

Q4: Any common field mistakes?

A: Over-tightening terminals or mixing copper and steel leads can cause unstable connections.

Q5: Best practice for fuse protection?

A: Many technicians install dedicated panel fusing at 1A to avoid nuisance trips and protect input wiring.

Copyright © 2025 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/

Partner: Ubest Automation Limited

Partner: PLCDCS HUB Limited

Specifications

  • BrandAllen-Bradley
  • ModelCompactBlock
  • Part Number1790-T8A0X
  • ConditionOriginal Brand New
  • Warranty12 Months

Additional information

Weight1.94 kg
Dimensions174 × 136 × 100 mm
Country Of Origin

United States

Customers Reviews

There are no reviews yet.

Be the first to review “Allen-Bradley 1790-T8A0X Input Module | CompactBlock DeviceNet”

Your email address will not be published. Required fields are marked *

Back to Top
Product has been added to your cart