Over 50,000 hot-selling automation module components.

3HAC035301-001 ABB DSQC406 Servo Drive Unit IRC5 OmniCore Spare Part

0 Reviews
In stock
  • 100% genuine products in stock with fast delivery.
  • 30-day return policy for quality assurance.
  • 12-month warranty for peace of mind.
SKU: 3HAC035301-001
Brands:

Product details

Product Overview

  • 3HAC035301-001 is a genuine ABB Robotics spare part.
  • It is a servo drive unit, known as DSQC406.
  • The drive supports ABB robot controllers in the IRC5 family.
  • Distributors also list it for OmniCore cabinets.
  • Platform attribution stays unverified in official ABB sources.
  • The board function and DSQC identity are confirmed.
  • ABB confirms this part through the IRC5 product manual.

Key Technical Data

  • Brand: ABB
  • Model: 3HAC035301-001
  • Series: ABB Robotics IRC5 / OmniCore Spare Parts
  • Product type: Servo drive unit (DSQC406)
  • Supply voltage: Not published by ABB
  • Communication protocols: Not published by ABB
  • Operating temperature: 0 to +45 °C (IRC5 controller ambient, family-level)
  • Storage temperature: -25 to +55 °C (IRC5 controller ambient, family-level)
  • Relative humidity: 5% to 95%, non-condensing (IRC5 controller ambient, family-level)
  • Protection rating: IP20 (internal option module, family-level)
  • Dimensions (H×W×D): Not published by ABB
  • Weight: Not published by ABB for this order code

Core Performance Notes

  • Measurement range: Not applicable to this drive unit.
  • Frequency response: Not published at board level.
  • Sensitivity: Not a sensor product; not applicable.
  • Linearity: Not published at board level.
  • Resolution: Not published at board level.
  • Temperature range: 0 to +45 °C operating.
  • Environmental tolerance: 5% to 95% RH, non-condensing.
  • Interference resistance: Designed for use inside the controller cabinet.

Data Gaps and Conflicts

  • Distributor voltage values conflict across sources.
  • Some list 24 V DC control bus power.
  • Others list 220 V AC or 400 to 600 VAC DC link.
  • Distributor protocols also conflict.
  • Listings mention EtherCAT, DeviceNet, RS-232, RS-485, and DriveBus.
  • No official board-level datasheet confirms these values.
  • We do not adopt unconfirmed distributor figures.

Installation Guide

  • Install only inside an ABB robot controller cabinet.
  • Follow ABB service documentation for the host controller.
  • Disconnect mains power before you start work.
  • Confirm the controller model before installation.
  • Use the correct internal mounting points.
  • Keep cooling airflow clear around the module.
  • Check all connections before you restore power.

Commissioning and Maintenance

  • Commission the drive as part of the controller startup.
  • Verify drive communication after power-up.
  • Inspect the module during routine cabinet maintenance.
  • Look for loose connections, heat marks, or damage.
  • Replace the unit if you find signs of failure.
  • Use only genuine ABB spare parts for replacement.

Compatibility Notes

  • Fits ABB IRC5 control cabinets.
  • Some distributors also list OmniCore compatibility.
  • ABB does not confirm the OmniCore platform link.
  • Check your controller order code before you order.
  • Contact ABB support for unusual cabinet setups.

Certification and Compliance

  • Board-level certification data is not published.
  • The host cabinet follows IRC5 system-level standards.
  • The module carries an IP20 rating inside the cabinet.
  • Always follow local electrical installation rules.

Packing List

  • One ABB 3HAC035301-001 DSQC406 servo drive unit.
  • Documentation is not included by default.
  • Accessories are not included unless you order them.
  • Check the box for damage before you sign for delivery.

Frequently Asked Questions

  • What is this board?
  • It is a DSQC406 servo drive unit for ABB controllers.
  • It drives robot motion inside the control cabinet.
  • Does it work with OmniCore?
  • Distributors list it for OmniCore cabinets.
  • ABB does not confirm that link in official documents.
  • Check with ABB support before you buy.
  • Why are voltage specs missing?
  • ABB does not publish a board-level voltage table.
  • Distributor values conflict, so we leave them out.
  • What should I check during maintenance?
  • Look for loose wires, heat marks, and physical damage.
  • Replace the unit if you find signs of failure.
  • Is this a genuine ABB part?
  • Yes, it is an ABB Robotics genuine spare part.
  • The information was last verified in November 2026.

Specifications

  • BrandABB
  • Part Number3HAC035301-001
  • ConditionOriginal Brand New

Customers Reviews

There are no reviews yet.

Be the first to review “3HAC035301-001 ABB DSQC406 Servo Drive Unit IRC5 OmniCore Spare Part”

Your email address will not be published. Required fields are marked *

Back to Top
Product has been added to your cart