Product details
Space-Saver for Hazardous Wet Areas: Certified Short-Case Probe with Long FluidLoc Cable
The Bently Nevada 330101-00-17-20-12-05 solves complex installation challenges. This 8mm probe from the 3300 XL series combines a very short 1.7-inch case for tight spaces with a long 2-meter FluidLoc leak-proof cable and full CSA, ATEX, IECEx safety certifications. It’s the ultimate solution for monitoring compact equipment in hazardous, leak-prone environments where the connection point is far away.
Complete Configuration: 330101-00-17-20-12-05
- Product Identity: 330101
- The base for a Bently Nevada 3300 XL 8mm Probe.
- Feature Breakdown:
- -00: Unthreaded Section: 0.0 inch.
- -17: Case Length: 1.7 inches (Ultra-Short).
- -20: Cable Length: 2.0 meters (6.6 feet) with long reach.
- -12: Critical Feature: ClickLoc Connector with FluidLoc Cable.
- -05: Critical Feature: CSA, ATEX, IECEx Approved.
Technical & Safety Data
- Core Measurement Specs
- Linear Range: 2.0 mm (80 mils).
- Setup Gap: 1.27 mm (50 mils).
- Sensitivity (ISF): 7.87 V/mm (200 mV/mil).
- Electrical (2m): 7.88 Ω ± 0.50 Ω.
- Premium Protected Design
- Total Protection: Hazardous area certified + integrated fluid barrier.
- Built to Last: Patented TipLoc and CableLoc technologies.
- Materials: PPS tip; Stainless steel body; Viton® O-ring seal.
- Operating Limits
- Temperature: -52°C to +177°C (Standard).
- Use Case: For confined, wet, and explosive atmospheres.
Ideal Applications & Key Benefits
- Complex Hazardous Area Installations: Perfect for small pumps, motors, or valves in chemical or offshore facilities where mounting depth is minimal but the safe-area junction box is meters away.
- Dual-Risk Mitigation: Addresses explosion safety regulations and operational fluid-ingress problems simultaneously with one certified, leak-proof device.
- Maximum Installation Flexibility: The short case fits into the tightest spots, while the long 2-meter FluidLoc cable provides the freedom to route safely to distant cabinets.
- Worry-Free Procurement: This advanced configuration comes with a 12-month warranty and is available for expedited global shipping via FedEx, UPS, and DHL.
Expert FAQ: Short Case, Long Cable, Full Certification
Selection & Application Guidance
What is a typical scenario for this specific 1.7-inch case / 2-meter cable configuration?
Imagine a small, oil-lubricated pump mounted on a skid in a Zone 2 area. The mounting boss is shallow, but the certified junction box is on the other side of the skid. This probe fits the shallow hole, and its long cable reaches the box, all while being safe and leak-proof.
Is the 1.7-inch case a common standard size?
It is a less common, specialized length for equipment with very limited clearance. Always verify the required insertion depth from the machine’s technical data to ensure this short case is suitable.
Technical & Installation
How do I ensure the long FluidLoc cable is properly supported during installation?
Use standard cable ties or clamps to secure the cable along its route. Avoid sharp bends or kinks. Proper support prevents strain on the probe’s CableLoc connection and protects the cable jacket.
Can this probe be used for both vibration and position measurement in these applications?
Yes. Its core function is accurate gap measurement. It can be configured for radial vibration or axial (thrust) position monitoring, following the same setup principles as any 3300 XL probe.
Procurement & Support
What is the lead time for this specialized model, and can I get it quickly?
As a specialized build, lead time may vary. Contact us directly for the most accurate stock and production status. We can often expedite shipping with our courier partners to meet urgent project needs.
Need this unique probe or have a similar challenging application?
Our application engineers can provide a solution:
Email: sales@powergearx.com
WhatsApp: +86 18030005825
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
Partner: PLCDCS HUB Limited
There are no reviews yet.