Product details
140NRP31200 Schneider Electric Modicon Quantum Ethernet Fiber Converter
Product Overview
140NRP31200 is an Ethernet fiber converter from Schneider Electric. It belongs to the Modicon Quantum automation platform. Therefore, it links fiber and copper networks with ease. It uses multi mode fiber at 1310 nm. As a result, it fits many communication jobs.
Why This Converter Stands Out
This unit has 2 fiber ports with LC connectors. In addition, it offers 2 Ethernet ports with RJ-45 jacks. Its receiver sensitivity reaches -30 dBm. Moreover, it supports distances of 2000 to 3000 meters.
Built for Real Networks
Furthermore, the 140NRP31200 uses only 5 W of power. Its inrush current is 1 A at 5 V DC. The bus current sits at 1000 mA. Also, six LEDs show module status and link health. However, it stays compact at 40 mm wide.
Technical Data
- Brand: Schneider Electric
- Model: 140NRP31200
- Series: Modicon Quantum
- Product Type: Ethernet Fiber Converter
- EAN: 3595864179216
- Weight: 1.00 lbs (0.45 kg) net
- Marking: CE
Optical Specs
- Fiber Type: Multi mode
- Wavelength: 1310 nm
- Fiber Ports: 2, LC connector
- Receiver Sensitivity: -30 dBm
- Detected Silence: -45 dBm
- Rise/Fall Time: 3 ns
- Distance Between 2 Transceivers:
- 2000 m with 50/125 µm fiber
- 3000 m with 62.5/125 µm fiber
- Attenuation:
- -23.5 to -14 dB with 50/125 µm fiber
- -20 to -14 dB with 62.5/125 µm fiber
Ethernet and Power
- Ethernet Ports: 2, RJ-45 interface
- Power Dissipation: 5 W
- Inrush Current: 1 A at 5 V DC
- Bus Current: 1000 mA
Local Signalling
- 1 LED green RDY module status
- 1 LED red ERR internal fault or module failure
- 1 LED green STS1 channel 1 link status
- 1 LED green FX1 ACT channel 1 communication status
- 1 LED green STS2 channel 2 link status
- 1 LED green FX2 ACT channel 2 communication status
Physical Data
- Material: PC (polycarbonate)
- Width: 1.59 in (40.34 mm)
- Height: 9.8 in (250 mm)
- Depth: 4.09 in (103.85 mm)
- Net Weight: 1.221 lb (0.554 kg)
Environment
- Operating Temperature: 32…140 °F (0…60 °C)
- Storage Temperature: -40…185 °F (-40…85 °C)
- Relative Humidity: 0…95 %
- Operating Altitude: 0…2000 m
Standards and Certifications
- CSA C22.2 No 142
- FM Class 1 Division 2
- UL 508
- C-tick
- TÜV
- Merchant Navy
Installation Guide
- Mount the converter in a dry control cabinet.
- Use multi mode fiber with LC connectors.
- Link Ethernet devices through the RJ-45 ports.
- Keep fiber bends gentle to avoid signal loss.
- Check the RDY LED turns green after power-up.
- Confirm ERR LED stays off during normal run.
- Keep the site between 0 and 60 °C.
Commissioning and Care
- Clean fiber tips before plugging them in.
- Watch the STS and FX LEDs for link health.
- Use the ERR LED to spot module faults.
- Wipe the housing with a dry cloth only.
- Check RJ-45 and LC seats for looseness.
- Replace the unit only when power is off.
Compatibility Notes
- Fits Modicon Quantum automation platform.
- Bridges fiber links and Ethernet copper links.
- Works with 50/125 µm and 62.5/125 µm fiber.
- Suits space-tight cabinet layouts.
- Designed for industrial network segments.
Packing List
- 1 x 140NRP31200 fiber converter
- 1 x Quick start guide
- 1 x Safety sheet
- 1 x Original packaging
Warranty and Shipping
- Warranty: 12 months
- Dispatch: 12–24 hours
- Couriers: FedEx, UPS, DHL
- Inquiries: sales@powergearx.com or +86 18030005825 (WhatsApp)
Expert Review
The 140NRP31200 is a strong pick for fiber-to-Ethernet links. Its LC fiber ports keep connections clean. Two RJ-45 ports cut extra hardware needs. The -30 dBm sensitivity helps with long runs. Power draw stays low at 5 W. The six LEDs make fault finding quick. This converter fits Quantum systems that need stable data flow over distance.
Manager’s Insight
This module saves rack space and wiring cost. It suits plants that mix fiber backbones with copper devices. The 2000 to 3000 m reach covers most factory floors. Its CE mark and UL 508 listing ease compliance checks. If you run a Modicon Quantum network, the 140NRP31200 is a smart add-on.
Best Fit Equipment and Applications
- Modicon Quantum control racks
- Factory fiber backbone links
- Long-distance Ethernet runs
- SCADA network segments
- Process control cabinets
- Water and power plants
- Marine and offshore panels
- Retrofit jobs with fiber cabling
FAQ
Optics and Distance
Q: What fiber type does the 140NRP31200 use?
A: It uses multi mode fiber. The wavelength is 1310 nm.
Q: How far can two converters sit apart?
A: They can reach 2000 m on 50/125 µm fiber. They can reach 3000 m on 62.5/125 µm fiber.
Ports and Power
Q: What connectors does it have?
A: It has 2 LC fiber ports and 2 RJ-45 Ethernet ports.
Q: How much power does it draw?
A: It dissipates 5 W. The bus current is 1000 mA.
Ordering and Support
Q: What is the warranty period?
A: The warranty is 12 months.
Q: How fast do you ship?
A: We dispatch within 12–24 hours.
Q: Which couriers do you use?
A: We ship via FedEx, UPS, and DHL.
Q: How do I contact sales?
A: Email sales@powergearx.com or message +86 18030005825 on WhatsApp.
Buying Guide
- Check your fiber type is multi mode.
- Confirm you need LC connectors.
- Measure the distance between network nodes.
- Verify your Ethernet devices use RJ-45.
- Plan for 5 W of heat in the cabinet.
- Match the site to 0–60 °C operation.
- Review UL 508 and CE needs for your plant.
- Order spare units for critical links.
- Contact us for bulk or urgent orders.
Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/














There are no reviews yet.