102044-00-18-10-02-00 Bently Nevada 3300 XL 8 mm Proximity Sensor

102044-00-18-10-02-00 Bently Nevada 3300 XL 8 mm Proximity Sensor

Need a fast quote? Email sales@powergearx.com or chat on WhatsApp +86 180 3000 5825. We ship in 12 to 24 hours by FedEx, UPS, or DHL.

Product Overview

• This is the Bently Nevada 102044-00-18-10-02-00. It is a 3300 XL 8 mm proximity sensor.
• The probe length is 1 metre. Output resistance is 50 Ω.
• It runs from -17.5 Vdc to -26 Vdc with no barriers. Current draw is 12 mA max.
• With barriers, use -23 Vdc to -26 Vdc. A more positive voltage than -23.5 Vdc can cut linear range.
• It works from -51 °C to +177 °C. That covers hot bearing housings and cold outdoor skids.
• The 8 mm tip measures shaft vibration, position, and speed on rotating machines.

Part Number Breakdown

• 102044 3300 XL 8 mm probe, 1 m
  • 00 No armor
  • 18 Case connection and thread option
  • 10 Cable length code, 1.0 m
  • 02 Connector type
  • 00 Agency approval option

Key Data

• Brand: Bently Nevada
• Model: 3300 XL 8 mm
• Part No.: 102044-00-18-10-02-00
• Type: Proximity sensor
• Length: 1 m
• Output resistance: 50 Ω
• Supply: -17.5 to -26 Vdc, 12 mA max
• With barriers: -23 to -26 Vdc
• Temperature: -51 °C to +177 °C

Manager’s Insight

• Most signal faults come from supply drift, not the probe tip.
• Keep the supply below -23.5 Vdc. Linear range stays wide.
• Check output resistance at 50 Ω during install. It is a fast health test.
• The +177 °C limit suits hot turbines. Do not exceed it on steam lines.
• Keep spare probes on the shelf. Downtime costs more than stock.

Expert Review

• The 3300 XL 8 mm is a proven workhorse for vibration monitoring.
• Wide temperature range and stable output make it easy to trust.
• The 1 m length fits tight bearing housings well.
• It mates with standard 3300 XL extension cables and Proximitor sensors.

Typical Equipment and Applications

• Steam and gas turbines
• Compressors and turbo expanders
• Large motors and generators
• Pumps with sleeve bearings
• Shaft position, vibration, and keyphasor sensing

Why Buy From Powergear X?

• Over 15 years in automation spares.
• Worldwide shipping by FedEx, UPS, and DHL.
• Tested surplus and refurbished parts in stock.
• Every part carries a 12-month warranty.
• We check each unit before dispatch.
• We support obsolete control systems.

FAQ

Q: My reading drifts at the top end. What should I check first?

A: Check supply voltage. If it is more positive than -23.5 Vdc, linear range shrinks. Move it toward -24 Vdc.

Q: Can I use this probe with a barrier?

A: Yes. Keep the supply between -23 Vdc and -26 Vdc when barriers are in line.

Q: How do I know the probe is healthy?

A: Measure output resistance. It should read near 50 Ω. A large gap points to a bad probe or cable.

Q: Is the 1 m length enough for my machine?

A: Measure from the probe tip to the extension cable joint. Add slack for bends. Choose 1 m only when it fits.

Q: What do I get with the order?

A: The probe, anti-static bag, carton, and a 12-month warranty card. We ship in 12 to 24 hours.

Q: Who do I contact for stock?

A: Email sales@powergearx.com or message WhatsApp +86 180 3000 5825.

Buying Guide

• Confirm supply voltage before you order. Barriers change the range.
• Check machine temperature. Stay under +177 °C.
• Measure cable run. Pick 1 m only when it fits.
• Match the connector to your extension cable.
• Keep one spare per machine train.

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/