Product details
Product Introduction
quod 330192-00-20-50-00 est 3300 XL 8 mm ETR Probe from Bently Nevada. It delivers reliable, non-contact vibration and position monitoring for critical machinery. This probe features a Filum 3/8-24 UNF with armor for enhanced durability. Its design ensures accurate measurements in demanding industrial environments.
Exemplar Number Naufragii
- 330192 — 3300 XL 8 mm ETR Probe, 3/8-24 UNF thread, with armor
- -00 — Agency Approval: Not required
- -20 — Overall Case Length: 2.0 inches
- -50 — Longitudo Totalis: 5.0 metra (16.4 pedes)
- -00 — Unthreaded Length: Minimum 0.0 inch
- -50 — Longitudo Totalis: 5.0 metra (16.4 pedes)
Technical Specifications
- Brand: Bently Nevada
- model: 330192-00-20-50-00
- Series: 3300 XL 8 mm ETR Probe
- Post Type: 3/8-24 UNF, with armor
- Longitudo non filata: Minimum 0.0 unciae (0.8 unciae minus quam longitudo capsulae esse debet)
- Longitudo Totalis Casus: 2.0 in (Optio 20)
- Longitudo totalis: V metris (pedes XVI)
- Designed for use with the 5 meter Proximitor sensor tantum
- DC Resistentia: 8.73 ± 0.50 Ω (a centro ad conductorem externum)
- Probabile consilium Material: Polyphenylene sulfide (PPS)
- Causa materialis: AISI 303 vel 304 sine ferro (SST)
- Re: Maximum length 0.563 in
- Sigillum Pressionis: Anulus Torius Viton® ad obsignationem pressionis differentialis
- Ambitus Temperaturae (Standard): -52 ° C ad F + 177 (-62 ut F + 350 ° F)
- Extended Tip Range: -52°C to +218°C (-62°F to +425°F)
- Extended Cable Range: -51°C to +260°C (-60°F to +500°F)
- Nota: Exposing probe below –34˚C (-30˚F) may cause premature pressure seal failure
- Tolerantia Umor: Less than 3% change in Average Scale Factor after 56 days at 93% RH (IEC 68-2-3)
- Approbatio propellente: Option 00 (not required for this variant)
Ancipitia Area certificaciones
- ia (Intrinsecus Tutus)
- Classis I, Zona 0: AEx/Ex ia IIC T5…T1 Ga
- Classis I, Greges A, B, C, D
- Classis II, Greges E, F, G
- III classis
- Requires installation with intrinsic safety zener barriers (drawing 141092) or galvanic isolators
- nA / ec (Non Incendibile)
- Classis I, Zona II: AEx/Ex nA IIC T5…T1 Gc
- Classis I, Division II, Groups A, B, C, D
- Classis I, Zona II: AEx/Ex ec llC T5…T1 Gc
- Requires installation with nonincendive circuit per drawing 140979
- Temperature Schedule (EPL Ga and Gc)
- T1: -55°C ad +232°C
- T2: -55°C ad +177°C
- T3: -55°C ad +120°C
- T4: -55°C ad +80°C
- T5: -55°C ad +40°C
Installatio et Compatibilitas
- Proximitor Compatibility: Designed for use with the 5 meter Proximitor sensor tantum
- Funes Extensionis: Vestibulum et
- Alternative Probes: For different length or application needs, consider
- 3300 5mm Probes Series
- Pressure Seal Testing: Si probatio requiritur, departmentum designandi consuetudinarii contacta.
Sustentatio et Servitium
- Troubleshooting: Measure DC resistance between center and outer conductors
- Nominal value: 8.73 ± 0.50 Ω
- victum, No routine maintenance required due to solid-state construction
- Field Replacement: Standardized thread and length options simplify interchangeability
- Naviportans: In-stock items ship within 12 24 horas,
- Vectores: FedEx, UPS, DHL
Index package
- 1 x 3300 XL 8 mm ETR Probe (330192-00-20-50-00)
- dux institutionem
- Calibration libellum Factory
Suspendisse & Support
- Suspendisse: Duodecim menses contra vitia fabricationis
- Support: Contact venditiones@powergearx.com or + 86 18030005825 (Whatsapp)
Perspicacia Moderatoris
Haec sonda aptissima est ad high-speed turbomachinery including steam turbines, compressors, and large pumps. The 5-meter total length eliminates extension cables in remote installations. The ia rating supports intrinsically safe applications with proper barriers.
peritus Review
The 3300 XL series delivers proven linearity and repeatability. The 8 mm probe provides excellent sensitivity for detecting small shaft movements. The Viton® seal reliably prevents process fluid ingress. For modular systems, pair with extension cables like 330190-085-00-US or 330190-085-00-05.
Frequenter Interrogata De Quaestiones (FAQ)
- Quae est maxima longitudo funis sine degradatione signalis?This 5.0-meter probe works only with the 5-meter Proximitor sensor. Longer runs need extension cables with proper impedance matching.
- Can this probe be used in wet or corrosive environments?Yes. Stainless steel case and PPS tip resist corrosion. The Viton® O-ring provides moisture sealing.
- Quomodo salutem specilli ante institutionem comprobo?Measure DC resistance between center and outer conductors. Expected reading is 8.73 ± 0.50 Ω.
- What is the difference between 8 mm and 5 mm proximity probes?The 8 mm probe offers larger target area and different linear range. For smaller shafts, consider the 3300 5mm Probes series.
- What mounting torque is required?Apply 15-20 ft-lbs for the 3/8-24 UNF thread. Ensure at least 0.8 inches of unthreaded length relative to case length.
- Is pressure seal testing included?No. Probes are not pressure tested before shipment. Contact custom design department if testing is required.
electio Edition
- Choose 330192-00-20-50-00 if:
- You need 5.0 meter total length and 2.0 inch case
- Approbatio procurationis non requiritur
- Application is non-hazardous or uses external barriers
- Elige 330190-085-00-US si:
- You need extension cable for longer reach between probe and Proximitor
- Elige 330190-085-00-05 si:
- You need 5.0 meter extension cable with connector for modular system design
Iura omnia reservantur societati Powergear X Automation Limited, MMXV.
Source: https://www.powergearx.com/
Non sunt tamen reviews.