Produk rincian
Pengenalan Produk
- 22A-V2P3F104 is an AC adjustable-frequency drive from Allen-Bradley.
- Itu milik Powerflex 4 family by Rockwell Automation.
- The drive takes 100…120V AC single-phase memasukkan.
- It puts out 0.4 kW (0.5 HP) pada pukul 2.3 A.
- Dudukan flensa menghemat ruang panel.
- Housing is IP20 / NEMA UL Type Open.
- No EMC filter is built in.
- Sistem rem terintegrasi IGBT telah terpasang.
- A built-in RS-485 DSI port handles setup and network links.
Pohon Kode Model
- 22A-V2P3F104
- 22A — PowerFlex 4 drive family
- V — Input 120V AC, 1 fase
- 2P3 — Keluaran 2.3 A, 0.4 kW / 0.5 HP
- F — Flange Mount, IP20, Type Open
- 1 — Fixed keypad interface
- 0 — Emission class: Not Filtered
- 4 — Type: Standard
- 0 — Emission class: Not Filtered
- 1 — Fixed keypad interface
- F — Flange Mount, IP20, Type Open
- 2P3 — Keluaran 2.3 A, 0.4 kW / 0.5 HP
Data Kunci
- Merek: Allen-Bradley (Rockwell Automation)
- Model: 22A-V2P3F104
- Seri: Powerflex 4
- Tipe: Penggerak frekuensi variabel AC
- Ukuran bingkai: A
- Metode kontrol: PWM output with programmable carrier frequency, default 4.0 kHz
- Antarmuka manusia: Fixed digital keypad with LED display
- Cooling: Convection cooled for flange-mount drives
- Berat: 3.434 kg per catalog data
- Dimensi (H × W × D): Ukuran keseluruhan: 210.0 × 175.0 × 147.5 mm
- Depth is 92.8 mm drive body plus 54.7 mm heatsink.
Peringkat Penggerak
- Daya keluaran terukur: 0.4 kW (0.5 HP)
- Arus keluaran kontinu: Para 2.3
- Tegangan output: 0…230V, tiga fasa
- Frekuensi output: 0…240 Hz, dapat diprogram
- Frekuensi pembawa: 2…16 kHz, terukur pada 4 kHz
- Intermittent overload: 150% selama 60 detik; 200% selama 3 detik
- Efisiensi: 97.5% tipikal
- Pengaturan kecepatan: ±2% of base speed over a 40:1 range with slip compensation
- Akurasi frekuensi: ±0.05% of set output frequency on digital input; 0.5% of max output frequency on analog input
- Percepatan/perlambatan: Two independent times, each 0…600 s in 0.1 s steps
- Mode berhenti: Ramp, Coast, DC-Brake, Ramp-to-Hold and S Curve
Kontrol I/O
- Masukan digital: 3 dedicated plus 2 programmable
- Dedicated inputs are Stop, Start/Run FWD and Direction/Run REV.
- Arus input adalah 6 mA.
- SRC mode: 18…24V DC = ON, 0…6V DC = OFF.
- SNK mode: 0…6V DC = ON, 18…24V DC = OFF.
- Input analog: 1, DIP-selectable 0…10V DC or 4…20 mA
- Analog input impedance is 100 kΩ in voltage mode and 250 Ω in current mode.
- Keluaran relai: 1 programmable Form C, 3.0 A resistive / 0.5 A inductive
- Umpan balik dari encoder: Not supported on PowerFlex 4; no closed-loop vector mode is published
Komunikasi
- Port bawaan: 1 × RS-485 DSI, up to two peripherals per drive
- Modbus RTU: Function codes 03, 06 and 16
- Node address: A104 range 1…247
- Tingkat Baud: A103 range 1200…38400 bit/s, default 9600
- Format: A107 RTU 8-N-1
- Use RS-485 repeaters beyond 32 nodes.
- Ekspansi: No option-card slot; use external DSI kit 22-XCOMM-DC-BASE with adapters 22-COMM-C, 22-COMM-D, 22-COMM-E or 22-COMM-P
- Optional communications power supply: 20-XCOMM-AC-PS1
- Remote keypads: 22-HIM-C2, 22-HIM-C2S, 22-HIM-A3 with cables 22-HIM-H10 or 22-HIM-H30
Electrical
- Suplai tegangan: 100…120V AC, 1 fase, ±10%
- Rentang tegangan masukan: 90…126V AC
- Frekuensi input: 50 / 60 Hz
- Input ratings: 1.15 kVA, 9.0 A input current, 15 A branch fuse
- Pemutus arus tegangan berlebih pada bus DC: 405 V DC
- Trip tegangan rendah pada bus DC: 210 V DC
- Perjalanan penuh kekuatan: 100 ms faultless
- Logic control ride-through: Minimal 0.5 detik, tipikal 2 detik
- Arus lebih: Batas perangkat keras 200%, kesalahan instan 300%.
- Pengereman: Integral brake IGBT; add an external resistor, minimum 60 Ω, catalog AK-R2-091P500 rated 5% duty
- Disipasi daya: 40 W total, 22 W external plus 18 W internal
Lingkungan dan Daya Tahan
- Suhu operasi: -10…+50 °C for IP20 / Open Type
- IP30 / NEMA 1 / UL Type 1 version: -10…+40 °C
- Flange mount: heatsink -10…+40 °C, drive -10…+50 °C
- Suhu penyimpanan: -40…+85 °C
- Kelembaban relatif: 0…95% tanpa kondensasi
- Syok: 15 g peak for 11 ms, operating
- Getaran: 1 g peak, 5…2000 Hz, operating
- Tingkat tekanan suara: 50 dBA, Frame A, measured 1 m away
- Ketinggian: 1000 m max without derating
- Suasana: Must be free of volatile or corrosive gas, vapors and dust
Panduan Instalasi
- Mount the drive vertically in a clean, dry panel.
- Jaga agar heatsink tetap kosong sehingga aliran udara dapat terjadi.
- Use the flange opening to send heat outside the panel.
- Order kit 22-JBAA to reach IP30 / NEMA 1 protection.
- Fit an external EMC filter for CE compliance.
- Use filter 22-RF010-AL for this rating.
- Keep motor cable short: 10 m in restricted or second environment, 1 m in unrestricted distribution.
- Use 100 m cable with an external L-type filter.
- Wire branch protection with UL Class J, CC, T or BS88 fuses, or a Bulletin 140M/140MT motor protector.
- Connect the brake resistor only if dynamic braking is needed.
Kemudahan Pengaturan dan Pemeliharaan
- The fixed LED keypad makes local setup fast.
- Parameter A091 sets the PWM carrier frequency.
- Parameter A103 sets baud rate and A104 sets node address.
- Parameter A107 sets the RTU frame format.
- Parameter P037 selects the stop mode.
- Monitor d004 shows output voltage at T1, T2 and T3.
- Convection cooling means no fan to service on this mount style.
- RS-485 DSI port supports quick diagnostics and remote keypads.
Catatan Kompatibilitas
- Runs standard three-phase AC induction motors up to 0.4 kW.
- Works with Modbus RTU masters over RS-485.
- Accepts 0…10V or 4…20 mA control signals.
- Accepts a 1…10 kΩ, 2 W minimum external potentiometer.
- Adds external DSI adapters for DeviceNet, ControlNet, EtherNet/IP or PROFIBUS.
- Works with 1769-SM2 Compact I/O module for multi-drive links.
- No encoder input, so skip closed-loop vector duties.
Spesifikasi
- cULus Terdaftar: UL 508C dan CSA C22.2 No. 14
- CE: EMC Directive 2014/30/EU (EN 61800-3) and Low Voltage Directive 2014/35/EU (EN 61800-5-1)
- Harmonik: Meets EN 61000-3-2 without extra parts
- KC: KCC-REM-RAA-22A
- Ekodesain: Within EU 2019/1781 and UK SI 2021 No. 745 scope; meets IE2 class
- No Safe Torque Off function is published.
- No conformal coating class or pollution degree is assigned.
Daftar kemasan
- 22A-V2P3F104 drive, 1 unit
- Fixed LED keypad, built in
- RS-485 DSI port, built in
- Integral brake IGBT, built in
- User manual 22A-UM001L-EN-E reference
- No EMC filter in the box
- No brake resistor in the box
Perangkat dan Aplikasi yang Paling Sesuai
- Konveyor kecil dan meja pengindeksan
- Mesin pengemasan dan pelabelan
- Small pumps and fans in light duty
- Machine tool feed and spindle helpers
- Food and beverage handling lines
- Material handling rollers and gates
- Retrofit jobs where panel depth is tight
- Modbus RTU networks with simple speed control
FAQ (Pertanyaan Umum)
- Can this drive take a 240V single-phase feed?
- No. This catalog code is set for 100…120V single-phase input.
- Pick a different voltage code for 200…240V or 380…480V.
- Is a braking resistor required for normal stops?
- No. Ramp and Coast stops work without one.
- Add a resistor only for fast stops or overhauling loads.
- How do I get NEMA 1 protection?
- Order the field kit 22-JBAA for Frame A.
- It raises the rating to IP30 / NEMA 1 / UL Type 1.
- From experience, why does a short motor cable still cause noise?
- Poor shield bonding is the common cause.
- Clamp the shield to the panel at both ends.
- Keep control and power wires in separate ducts.
- From experience, what trips this drive in summer panels?
- Heat builds up when the flange opening is blocked.
- Clear the cutout, check airflow, and respect the 50 °C limit.
- Also confirm the 40 W loss figure fits your cabinet budget.
















Tidak ada ulasan.