Módulo de entrada de sumidero de 16 canales BMXDDI1602H Schneider X80 para uso intensivo

Descripción general del producto

• BMXDDI1602H is a discrete input module from the Modicon X80 rango.
• Moreover, it comes from Schneider Electric, a leader in industrial control.
• El módulo ofrece 16 isolated 24 V DC inputs.
• Además, utiliza positive logic (sink) alambrado.
• This version targets entornos severos with conformal coating.
• For example, each channel meets IEC 61131-2 type 3 and IEC 60947-5-2.
• Therefore, a compact body saves space in dense control cabinets.
• As a result, hot swapping fallback cuts downtime during service.
• Also, fast 4 ms typical response supports quick machine tasks.
• Finally, strong isolation protects the bus from field noise.

Especificaciones técnicas

• Marca: Schneider Electric
• Modelo: BMXDDI1602H
• serie: Modicon X80
• Tipo de módulo: Módulo de entrada discreta
• Aplicación: Industrial use in severe environments
• Recuento de entradas: 16 entradas aisladas
• Voltaje De Entrada: Aislado de 24 V CC
• Lógica de entrada: Lógica positiva (sumidero)
• Cableado de entrada: 2 o 3 hilos
• Corriente de entrada: 3.5 mA a 24 V CC
• Estado de voltaje 1: > = 11 V
• Estado de voltaje 0: <5 V
• Estado actual 1: > = 2 mA
• Estado actual 0: <= 1.5 mA
• Impedancia de entrada: 6800 Ohm
• Input Paralleling: Sí:
• Protección de entrada: Protección contra polaridad inversa
• Resistencia de aislamiento: > 10 MOhm a 500 V CC
• Tiempo de Respuesta: 4 ms típico, 7 ms máximo
• Fuente de alimentación del sensor: 19…30 V at 60 °C, 21.1…26.4 V at 70 °C
• Consumo actual: 76 mA DC typical, <= 107 mA at 3.3 V DC
• Disipación de potencia: 2.5 W
• Aislamiento: 1500 V for 1 minute between channels and bus
• Hot Swapping Fallback: Sí:
• MTBF Reliability: 775,000 horas
• Detección de fallos en los sensores: < 14 V DC fault, > 18 V DC OK
• Señalización Local: 1 green RUN LED, 1 green LED per channel, 1 red ERR LED, 1 red I/O LED
• Dimensiones: 103.7 mm height, 32 mm width, 86 mm depth
• Peso: 0.115 kg

Datos básicos de rendimiento

• Rango de entrada: 24 V DC isolated signals.
• También, Velocidad de respuesta: 4 ms typical and 7 ms maximum.
• Sensibilidad: State 1 starts at 11 V and 2 mA.
• Por otro lado, State 0 Threshold: Below 5 V and 1.5 mA.
• Impedancia de entrada: 6800 Ohm keeps load light.
• De esta manera, las Rango de temperatura: -25…70 °C operation.
• Rango de almacenamiento: -40…85 °C.
• Además, Humedad: 5…95 % at 55 °C without condensation.
• Protección de ingreso: IP20 with conformal coating.
• Además, Grado de contaminación: 2.
• Inmunidad al ruido: 1500 V AC dielectric strength for 1 minute.
• Además, Resistencia de vibracion: 3 millón
• Resistencia a los golpes: 30 millón
• También, Altitud: 0…2000 m, up to 5000 m with derating.
• Resistencia al gas: Class Gx and 3C4.
• Por ejemplo, Dust and Sand Resistance: Class 3S4.
• Resistencia a la sal: Nivel 2.
• Finalmente, Mold and Fungal Resistance: Class 3B2.

Guía de instalación

• First, mount the module on a standard Modicon X80 estante.
• Then, keep the required clearance for airflow and wiring.
• Next, use 2 or 3 wire wiring based on your sensor type.
• After that, check sensor supply voltage at the terminal.
• Also, confirm positive logic sink wiring before power up.
• Moreover, keep field wiring away from high voltage cables.
• In addition, follow local codes for panel grounding.
• Then, check the RUN, ERR and I/O LEDs after startup.
• Finally, label each channel for faster maintenance.
• Therefore, allow space for hot swap during service.

Facilidad de instalación y mantenimiento

• For example, per channel LEDs show diagnostics at a glance.
• Also, hot swapping fallback helps replace modules fast.
• Moreover, sensor fault detection warns you early.
• In addition, reverse polarity protection lowers damage risk.
• Therefore, high MTBF of 775,000 hours supports long service.
• Furthermore, conformal coating resists gas, dust and salt.
• Then, check sensor voltage after long cable runs.
• Also, clean the module with a dry cloth only.
• Besides, keep spare units for critical lines.
• Finally, log faults to plan maintenance better.

Notas de compatibilidad

• Primero, funciona con el Modicon X80 .
• Also, it fits standard X80 racks and backplanes.
• Moreover, it supports IEC 61131-2 type 3 sensors.
• In addition, it supports IEC 60947-5-2 sensors at 24 V DC.
• Then, it uses 2 or 3 wire sensor wiring.
• Furthermore, inputs can be paralleled when needed.
• However, it is not for AC input signals.
• Therefore, check rack power budget before you install.
• Also, confirm controller memory map for 16 inputs.
• Finally, pair with X80 power and communication modules.

Certificaciones y normas

• en primer lugar, CE y Reino Unido calificación.
• También, cULus para América del Norte
• Por otro lado, RCM para Australia y Nueva Zelanda.
• Además, EAC for Eurasian markets.
• A continuación, ATEX zone 2 para atmósferas explosivas.
• Además, IECEx zone 2 for global hazardous areas.
• Además, CCC Ex zone 2 pendiente.
• También, cULus HazLoc para lugares peligrosos.
• Por otro lado, IEC-61131 2 para controladores programables.
• Finalmente, 2014 / 35 / EU low voltage and 2014 / 30 / EU EMC directives.

Lista de equipaje

• en primer lugar, BMXDDI1602H discrete input module, 1 piece.
• Also, product datasheet and wiring guide.
• Moreover, export carton with protection foam.
• In addition, package height: 5.5 cm.
• Then, package width: 11 cm.
• Furthermore, package length: 11.5 cm.
• Besides, package weight: 165 g.
• Therefore, check the box on arrival.
• Also, report damage within 48 hours.
• Finally, keep the original packing for claims.

Garantía y envío

• en primer lugar, Garantía: 12 meses.
• También, Envío: Entre 12 y 24 horas después de la confirmación del pedido.
• Por otro lado, Mensajeros: FedEx, UPS, DHL.
• In addition, tracking number shared after dispatch.
• Then, packaging meets standard export rules.
• Therefore, contact ventas@powergearx.com para preguntas sobre envíos.
• Also, call or message +86 18030005825 Para pedidos urgentes.
• Moreover, ask about stock before large orders.
• Furthermore, we help with compatibility checks.
• Finally, share your application for a tailored quote.

Revisión de Expertos

• En primer lugar, la BMXDDI1602H is built for tough plant floors.
• Also, conformal coating adds real protection in harsh sites.
• Moreover, 16 isolated inputs reduce cross channel noise.
• In addition, the 4 ms typical response suits most machine tasks.
• Then, strong isolation protects the bus from field surges.
• Furthermore, hot swap fallback cuts downtime during service.
• Besides, 775,000 hour MTBF shows strong reliability.
• Also, sensor fault detection helps early troubleshooting.
• Therefore, hazardous area certifications widen its use.
• Finally, it is a solid pick for severe environment projects.

La visión del gerente

• First, buy this module when your panel faces gas, dust or salt.
• Also, it saves space with 16 inputs in a narrow body.
• Moreover, stock spare units for critical process lines.
• In addition, check sensor supply voltage before connecting all channels.
• Then, use shielded cable in high noise areas.
• Furthermore, plan 16 input words in the controller map.
• Therefore, order early to meet 12-24 hour dispatch.
• Also, ask ventas@powergearx.com para precios por volumen.
• Besides, message +86 18030005825 Para soporte rápido.
• Finally, train staff on hot swap steps to avoid errors.

Equipos y aplicaciones que mejor se adaptan a sus necesidades.

• First, oil and gas skids in ATEX zone 2.
• Also, chemical plants with gas and dust exposure.
• Moreover, water treatment plants with humid cabinets.
• In addition, food processing lines with washdown areas.
• Then, marine and offshore panels with salt air.
• Furthermore, mining equipment with high vibration.
• Besides, power generation auxiliary control rooms.
• Also, automotive plants with mixed sensor banks.
• Moreover, material handling systems with 24 V DC sensors.
• Finally, any Modicon X80 system in severe conditions.

Preguntas Frecuentes

• P: ¿Qué es el BMXDDI1602H ¿usado para?
  First, it reads 16 discrete 24 V DC inputs in X80 systems.
• P: ¿Cuántas entradas tiene?
  Also, it has 16 isolated input channels.
• P: ¿Qué voltaje de entrada acepta?
  Moreover, it accepts 24 V DC isolated signals.
• Q: What logic type does it use?
  In addition, it uses positive logic, also called sink.
• P: ¿Qué tan rápido responde?
  Then, it responds in 4 ms typical and 7 ms maximum.
• Q: What is the state 1 voltage?
  Furthermore, state 1 is guaranteed at 11 V or higher.
• Q: What is the state 0 voltage?
  Besides, state 0 is guaranteed below 5 V.
• P: ¿Cuál es la impedancia de entrada?
  Also, the input impedance is 6800 Ohm.
• Q: Does it protect against reverse polarity?
  Therefore, yes, it has reverse polarity protection.
• P: ¿Es compatible con intercambio en caliente?
  Also, yes, hot swapping fallback is supported.
• P: ¿Cuál es la temperatura de funcionamiento?
  Moreover, it runs at -25…70 °C.
• P: ¿Qué es el MTBF?
  In addition, the MTBF is 775,000 hours.
• P: ¿Qué certificaciones posee?
  Then, CE, UKCA, cULus, RCM, EAC, ATEX zone 2 and IECEx zone 2.
• P: ¿Con qué rapidez realizan los envíos?
  Furthermore, we dispatch in 12-24 hours via FedEx, UPS or DHL.
• P: ¿Cuál es la garantía?
  Besides, the warranty is 12 months.
• Q: Can I use 2 wire sensors?
  Also, yes, 2 or 3 wire wiring is supported.
• P: ¿Cómo puedo obtener ayuda para la selección?
  Finally, email ventas@powergearx.com o mensaje +86 18030005825.

Guía de Compra

• First, check your sensor type. This module suits 24 V DC.
• Also, count your inputs. This unit gives you 16 channels.
• Moreover, confirm your rack supports Modicon X80 modules.
• In addition, review the -25…70 °C range against your site.
• Then, check hazardous area needs before you order.
• Furthermore, plan for sensor supply voltage at 60 °C or 70 °C.
• Besides, add spare units for critical production lines.
• Therefore, order early to meet 12-24 hour dispatch.
• Also, ask about stock before large orders.
• Finalmente, contacta ventas@powergearx.com or +86 18030005825 Para obtener asesoramiento rápido.

Información de Contacto

• First, email: ventas@powergearx.com
• Also, WhatsApp: +86 18030005825
• Moreover, we reply fast during business hours.
• In addition, send your model list for a quick quote.
• Then, ask about stock before you order.
• Furthermore, our team can help with compatibility checks.
• Besides, share your application for a tailored recommendation.
• Also, we support FedEx, UPS and DHL delivery.
• Moreover, get tracking details after dispatch.
• Finally, reach out for warranty or return questions.

Copyright © 2026 Powergear X Automation Limited. Todos los derechos reservados.

Fuente original: https://www.powergearx.com/