E82EV552-4C040 Lenze 8200 Vector Drive 5.5 kW EMV-Filter

Produktübersicht

• Model E82EV552-4C040 is a Lenze 8200 vector frequency inverter.
• Es fährt einen 5.5 kW four-pole asynchronous motor with reliable control.
• This panel-mounted E design includes an integrierter EMV-Filter.
• Das x4x variant adds Safe Torque Off (STO) for safer machine stops.
• It supports V/f control, vector control, and sensorless torque control.
• Der Nennausgangsstrom beträgt 13.0 A bei einer Schaltfrequenz von 8 kHz.
• Max output current reaches 19.5 A für 60 s under periodic load.
• This inverter suits conveyors, pumps, fans, and general machine drives.
• Lenze lists the 8200 vector as a legacy series with a clear migration path.
• The official path leads to the i950 drive generation.

Technische Spezifikationen

• Marke: Lenze
• Modell: E82EV552-4C040
• Serie: 8200 Vektor
• Motornennleistung: 5.5 kW typical, four-pole three-phase asynchronous motor
• Bemessungsausgangsstrom: 13.0 A nominal bei 8 kHz Schaltfrequenz
• Maximaler Ausgangsstrom: 19.5 A for 60 s, periodic load change cycle
• Überlast: 1.8 x rated torque for 60 s when rated motor power equals rated controller power
• Motorsteuerung: V/f characteristic control (linear/quadratic), vector control, sensorless torque control
• Schaltfrequenz: 2 / 4 / 8 / 16 kHz, noise-optimised setting
• Maximale Ausgangsfrequenz: 0 zu 650 Hz
• Versorgungsspannung: 3/PE 320 to 550 V AC, 45 to 65 Hz; alternative DC 450 to 775 V DC
• Leistungsverlust: 230 W at rated current and 8 kHz
• Betriebstemperatur: -10 to +55 °C, derated by 2.5 %/°C above +40 °C
• Lagertemperatur: -25 Bis + 60 ° C
• Relative Luftfeuchtigkeit: average 85 % RH, without condensation, climatic class 3K3 per EN 50178
• Schutzart: IP20 per EN 60529; IP41 with push-through thermally separated mounting
• Abmessungen (H x B x T): 240 x 125 x 140 mm
• Gewicht: 3.6 kg
• Eingebaute Anschlüsse: control terminals X3 with digital inputs, analog input/output, and relay output K1
• Protokolle: none onboard; no integrated fieldbus or Ethernet
• Erweiterung der Kommunikationswege: plug-in I/O and fieldbus option modules, such as E82ZAFSC010 Standard I/O and E82ZAFAC010 Application I/O
• Measurement range, frequency response, sensitivity, linearity, resolution: not specified in the supplied data
• Umweltbeständigkeit: designed for cabinet-mounted industrial use within the stated temperature and humidity limits
• Störfestigkeit: integrated EMC filter supports compliant installation in industrial environments

Installationsanleitung

• Mount the unit vertically inside a clean control cabinet.
• Keep the specified clearance for heat dissipation.
• Use the push-through mounting option for IP41 protection.
• Connect the motor cable with proper shielding and grounding.
• Wire control terminals X3 for digital and analog signals.
• Use relay output K1 for status or fault signalling.
• Check supply voltage against the 320 bis 550 V AC range.
• Follow Lenze EMC wiring rules to reduce noise.
• Die Leistung sollte oberhalb einer Umgebungstemperatur von +40 °C reduziert werden.
• For safe torque off, wire the STO function per the x4x variant requirements.

Komfort bei Inbetriebnahme und Wartung

• Set motor data and control mode through the standard parameter structure.
• Choose linear or quadratic V/f curves for simple pump and fan duty.
• Use vector control for better torque behaviour at low speed.
• Select 2, 4, 8, or 16 kHz switching frequency for noise and load balance.
• The integrated EMC filter reduces external filter work.
• Plug-in option modules simplify later I/O or fieldbus upgrades.
• Keep spare fans and clean air paths for long service life.
• Record parameter sets for quick replacement or migration.

Kompatibilitätshinweise

• Matches a 5.5 kW four-pole asynchronous motor at rated current.
• Works with standard three-phase industrial supply systems in the stated range.
• Accepts plug-in Lenze option modules for expanded I/O and fieldbus use.
• No onboard fieldbus or Ethernet port is present.
• Lenze confirms no drop-in same-order-code replacement for newer drives.
• Lenze confirms that the i950 emulates 8200 vector behaviour via the i950 PROFIBUS module and L_ICIP library.
• Plan migration with Lenze AKB articles 321231 and 316137 for 8200 vector, 9300, 8400, and 9400 families.
• Check motor insulation and cable length before commissioning.

Informationen zu Zertifizierung und Konformität

• Protection rating follows EN 60529.
• Climatic class follows 3K3 gemäß EN 50178.
• Integrated EMC filter supports industrial EMC compliance when installed correctly.
• Safe Torque Off is included in the x4x variant for machine safety integration.
• Confirm local panel and machinery directives before final installation.
• Prüfstatus: OFFIZIELL_VERIFIZIERT.

Packliste und Garantie

• 1 x Lenze E82EV552-4C040 8200 vector inverter
• 1 x safety and installation information set
• 12-Monatsgarantie inklusive
• Einsatz innerhalb von 12 bis 24 Stunden für Bestellungen von Lagerware
• Versand durch FedEx, UPS oder DHL
• Die Sendungsverfolgungsdetails werden nach dem Versand übermittelt.

Bewertung durch Experten

• Das E82EV552-4C040 remains a practical choice for legacy machine upgrades.
• Seine integrierter EMV-Filter saves panel space and wiring effort.
• STO support adds real value for safer maintenance access.
• Vector control gives solid performance for conveyors and mixers.
• The main limit is the missing onboard fieldbus port.
• Buyers should plan option modules or a future i950 migration.
• Stock spare units if downtime is costly on existing lines.

Einblicke des Managers

• Treat this model as a proven legacy drive, not a current flagship.
• Confirm the exact x4x STO wiring before quoting a replacement.
• Check cabinet temperature and derating above +40 °C.
• Bundle spare units and parameter backups for critical machines.
• For new designs, compare the i950 path with this 8200 vector unit.
• For urgent repairs, ask about stock and same-day packing.

Optimale Ausrüstung und Anwendungen

• Conveyor lines and material handling systems
• Pumpen und Ventilatoren mit variabler Drehzahl
• Mixers, agitators, and simple process machines
• Verpackungs- und Textilmaschinen
• Legacy production cells using Lenze 8200 vector drives
• Retrofit projects that need a known, documented drive platform

FAQ

• Is the E82EV552-4C040 a current Lenze product?
• No. Lenze lists the 8200 vector as a previous product series.
• Can I replace it with an i950 directly?
• Not as a same-order-code drop-in. Lenze confirms a migration path with i950 emulation support.
• Does this model have an onboard fieldbus?
• No. It has no integrated fieldbus or Ethernet port.
• How do I add fieldbus or extra I/O?
• Use Lenze plug-in option modules such as E82ZAFSC010 or E82ZAFAC010.
• What motor does it suit?
• A 5.5 kW four-pole asynchronous motor with a rated current near 13.0 A.
• Can it run above +40 °C?
• Yes, with derating of 2.5 % per °C above +40 °C.
• Was ist die maximale Ausgangsfrequenz?
• 0 bis 650 Hz.
• Does it include a safety function?
• Yes, the x4x variant includes Safe Torque Off.
• Wie hoch ist die Schutzart?
• IP20, or IP41 with push-through thermally separated mounting.
• Wie schnell dauert der Versand?
• In-stock orders dispatch in 12 to 24 hours by FedEx, UPS, or DHL.
• Welche Garantie gilt?
• Eine 12-monatige Garantie ist inklusive.
• How do I choose between repair and replacement?
• Compare fault history, spare availability, and the cost of an i950 migration.
• What should I check before buying a used or legacy unit?
• Check the x4x STO variant, firmware, parameter backup, and cabinet history.
• Can this drive handle high starting torque?
• Yes within its overload rating: 1.8 x rated torque for 60 s.
• Was sollte ich vor der Bestellung bestätigen?
• Confirm supply voltage, motor current, STO need, and option module plan.

Ratgeber

• Start with the motor nameplate current and voltage.
• Bestätigen Sie die x4x STO requirement for your safety concept.
• Decide whether plug-in I/O or fieldbus modules are needed.
• Check cabinet ambient temperature and derating needs.
• Order a parameter backup device or record settings before swap.
• Keep one spare inverter for critical legacy lines.
• For long-term projects, compare the i950 migration path before buying.

Kontaktinformationen

• Anfragen: sales@powergearx.com
• Telefon und WhatsApp: +86 18030005825

Copyright and Source

• Copyright © 2026 Powergear X Automation Limited. Alle Rechte vorbehalten.
• Originalquelle: https://www.powergearx.com/