22A-V2P3F104 Allen-Bradley PowerFlex 4-aandrywing, Kompakte 22A-V2P3F104 VFD

Produk-inleiding

• 22A-V2P3F104 is an AC adjustable-frequency drive from Allen-Bradley.
• Dit behoort aan die PowerFlex 4 family by Rockwell Automation.
• The drive takes 100…120V AC single-phase insette.
• It puts out 0.4 kW (0.5 HP) by 2.3A.
• The flange mount saves panel space.
• Housing is IP20 / NEMA UL Type Open.
• Geen EMC-filter is ingebou nie.
• 'n Integrale rem-IGBT is toegerus.
• A built-in RS-485 DSI port handles setup and network links.

Modelkodeboom

• 22A-V2P3F104
  • 22A — PowerFlex 4 drive family
  • V — 120V AC, 1-phase input
    • 2P3 — 2.3 A-uitset, 0.4 kW / 0.5 HP
      • F — Flange Mount, IP20, Type Open
        • 1 — Fixed keypad interface
          • 0 — Emission class: Not Filtered
            • 4 — Type: Standard

Sleutel data

• Merk: Allen-Bradley (Rockwell Automation)
• model: 22A-V2P3F104
• Reeks: PowerFlex 4
• tipe: WS-verstelbare frekwensie-aandrywer
• Raam grootte: A
• Beheermetode: PWM output with programmable carrier frequency, default 4.0 kHz
• Menslike koppelvlak: Vaste digitale sleutelbord met LED-skerm
• Afkoeling: Convection cooled for flange-mount drives
• Gewig: 3.434 kg per catalog data
• Afmetings (H × B × D): 8 350 × 2 600 × 3 250 mm oor die algemeen
• Depth is 92.8 mm drive body plus 54.7 mm heatsink.

Rygraderings

• Gegradeerde uitsetkrag: 0.4 kW (0.5 HP)
• Deurlopende uitsetstroom: Die 2.3
• Uitset spanning: 0…230V, driefase
• Uitset frekwensie: 0…240 Hz, programmeerbaar
• Draer frekwensie: 2…16 kHz, gegradeer teen 4 kHz
• Intermittent overload: 150% vir 60 s; 200% vir 3 s
• Doeltreffendheid: 97.5% tipies
• Spoedregulering: ±2% of base speed over a 40:1 range with slip compensation
• Frekwensie akkuraatheid: ±0.05% of set output frequency on digital input; 0.5% of max output frequency on analog input
• Versnel/vertrag: Two independent times, each 0…600 s in 0.1 s steps
• Stopmodusse: Ramp, Coast, DC-Brake, Ramp-to-Hold and S Curve

Beheer I/O

• Digitale insette: 3 dedicated plus 2 programmable
• Dedicated inputs are Stop, Start/Run FWD and Direction/Run REV.
• Input current is 6 mA.
• SRC mode: 18…24V DC = ON, 0…6V DC = OFF.
• SNK mode: 0…6V DC = ON, 18…24V DC = OFF.
• Analoog insette: 1, DIP-selectable 0…10V DC or 4…20 mA
• Analog input impedance is 100 kΩ in voltage mode and 250 Ω in current mode.
• Aflos uitset: 1 programmable Form C, 3.0 A resistive / 0.5 A inductive
• Enkodeerder terugvoer: Not supported on PowerFlex 4; no closed-loop vector mode is published

kommunikasie

• Ingeboude poort: 1 × RS-485 DSI, up to two peripherals per drive
• Modbus RTU: Function codes 03, 06 and 16
• Node adres: A104-reeks 1…247
• Baud koers: A103 range 1200…38400 bit/s, default 9600
• Format: A107 RTU 8-N-1
• Use RS-485 repeaters beyond 32 nodes.
• uitbreiding: No option-card slot; use external DSI kit 22-XCOMM-DC-BASE with adapters 22-COMM-C, 22-COMM-D, 22-COMM-E or 22-COMM-P
• Optional communications power supply: 20-XCOMM-AC-PS1
• Remote keypads: 22-HIM-C2, 22-HIM-C2S, 22-HIM-A3 with cables 22-HIM-H10 or 22-HIM-H30

Elektriese

• Spanning: 100…120V WS, 1-fase, ±10%
• Insetspanningreeks: 90…126V AC
• Invoerfrekwensie: 50 / 60 Hz
• Invoergraderings: 1.15 kVA, 9.0 A input current, 15 A branch fuse
• GS-bus oorspanningsuitskakeling: 405 V DC
• GS-bus onderspanningsuitskakeling: 210 V DC
• Kragdeurrit: 100 ms foutloos
• Logic control ride-through: 0.5 s minimum, 2 s tipies
• Oorstroom: 200% hardewarelimiet, 300% onmiddellike fout
• gerem: Integral brake IGBT; add an external resistor, minimum 60 Ω, catalog AK-R2-091P500 rated 5% duty
• Kragverlies: 40 W totaal, 22 W ekstern plus 18 W intern

Omgewing en Duursaamheid

• Temperatuur: -10…+50 °C for IP20 / Open Type
• IP30 / NEMA 1 / UL Type 1 version: -10…+40 °C
• Flange mount: heatsink -10…+40 °C, drive -10…+50 °C
• Stoor temperatuur: -40 ...+85 ° C
• Relatiewe humiditeit: 0…95% nie-kondenserend
• skok: 15 g peak for 11 ms, operating
• Vibrasie: 1 g peak, 5…2000 Hz, operating
• Klankdrukvlak: 50 dBA, Frame A, measured 1 m away
• Hoogte: 1000 m maksimum sonder afgradering
• atmosfeer: Must be free of volatile or corrosive gas, vapors and dust

Installasie Handleiding

• Mount the drive vertically in a clean, dry panel.
• Hou die hitteafvoer oop vir lugvloei.
• Use the flange opening to send heat outside the panel.
• Order kit 22-JBAA to reach IP30 / NEMA 1 protection.
• Fit an external EMC filter for CE compliance.
• Use filter 22-RF010-AL for this rating.
• Keep motor cable short: 10 m in restricted or second environment, 1 m in unrestricted distribution.
• Use 100 m cable with an external L-type filter.
• Wire branch protection with UL Class J, CC, T or BS88 fuses, or a Bulletin 140M/140MT motor protector.
• Connect the brake resistor only if dynamic braking is needed.

Opstelling en Onderhoudsgemak

• The fixed LED keypad makes local setup fast.
• Parameter A091 sets the PWM carrier frequency.
• Parameter A103 sets baud rate and A104 sets node address.
• Parameter A107 sets the RTU frame format.
• Parameter P037 selects the stop mode.
• Monitor d004 shows output voltage at T1, T2 and T3.
• Convection cooling means no fan to service on this mount style.
• RS-485 DSI port supports quick diagnostics and remote keypads.

Verenigbaarheidsnotas

• Runs standard three-phase AC induction motors up to 0.4 kW.
• Works with Modbus RTU masters over RS-485.
• Accepts 0…10V or 4…20 mA control signals.
• Accepts a 1…10 kΩ, 2 W minimum external potentiometer.
• Adds external DSI adapters for DeviceNet, ControlNet, EtherNet/IP or PROFIBUS.
• Works with 1769-SM2 Compact I/O module for multi-drive links.
• No encoder input, so skip closed-loop vector duties.

Certificaties

• cULus Gelys: UL 508C and CSA C22.2 No. 14
• CE: EMC Directive 2014/30/EU (EN 61800-3) and Low Voltage Directive 2014/35/EU (EN 61800-5-1)
• Harmoniese: Meets EN 61000-3-2 without extra parts
• KC: KCC-REM-RAA-22A
• Eko-ontwerp: Within EU 2019/1781 and UK SI 2021 No. 745 scope; meets IE2 class
• No Safe Torque Off function is published.
• No conformal coating class or pollution degree is assigned.

Pak lys

• 22A-V2P3F104 drive, 1 unit
• Fixed LED keypad, built in
• RS-485 DSI port, built in
• Integral brake IGBT, built in
• Gebruikershandleiding 22A-UM001L-AF-A verwysing
• No EMC filter in the box
• No brake resistor in the box

Beste Pas Toestelle en Toepassings

• Klein vervoerbande en indekseertafels
• Verpakkings- en etiketteermasjiene
• Small pumps and fans in light duty
• Machine tool feed and spindle helpers
• Food and beverage handling lines
• Material handling rollers and gates
• Retrofit jobs where panel depth is tight
• Modbus RTU networks with simple speed control

FAQ

• Can this drive take a 240V single-phase feed?
• No. This catalog code is set for 100…120V single-phase input.
• Pick a different voltage code for 200…240V or 380…480V.

• Is a braking resistor required for normal stops?
• No. Ramp and Coast stops work without one.
• Add a resistor only for fast stops or overhauling loads.

• How do I get NEMA 1 protection?
• Order the field kit 22-JBAA for Frame A.
• It raises the rating to IP30 / NEMA 1 / UL Type 1.

• From experience, why does a short motor cable still cause noise?
• Poor shield bonding is the common cause.
• Clamp the shield to the panel at both ends.
• Keep control and power wires in separate ducts.

• From experience, what trips this drive in summer panels?
• Heat builds up when the flange opening is blocked.
• Clear the cutout, check airflow, and respect the 50 °C limit.
• Also confirm the 40 W loss figure fits your cabinet budget.