22A-A4P5H204 Allen-Bradley PowerFlex 4-aandrywing, 1 pk kompakte omvormer (VFD)

Produk Hoogtepunte

• model 22A-A4P5H204 is a PowerFlex 4 AC drive from Allen-Bradley / Rockwell Automation.
• Dit neem single-phase 200…240 V AC input and gives 0.75 kW (1 HP) output at 4.5 A.
• Uitset is three-phase 0…230 V met 'n frekwensiebereik van 0…240 XNUMX Hz.
• Die replacement plate design fits right into existing panel cutouts.
• An integrale rem IGBT is built in for fast stops.
• A ingeboude RS-485 DSI-poort supports Modbus RTU networking.
• Hierdie is 'n compact, low-cost choice for simple motor control.

Tegniese data

• Handelsmerk en model
  • Merk: Allen-Bradley (Rockwell Automation)
  • model: 22A-A4P5H204
  • Reeks: PowerFlex 4 (22A)
  • tipe: WS-verstelbare frekwensie-aandrywer
• Catalog code breakdown
  • 22A = PowerFlex 4 family
  • A = 240 V AC, single-phase
  • 4P5 = 4.5 A output, 0.75 kW
  • H = replacement plate, IP20 open type
  • 2 = interface module code
  • 0 = not filtered
  • 4 = standard build
• Krag en beheer
  • Uitset krag: 0.75 kW (1 HP)
  • Deurlopende uitset: Die 4.5
  • Draer frekwensie: 2…16 kHz, default 4 kHz
  • oorlading: 150% vir 60 s; 200% for 3 s
  • Doeltreffendheid: 97.5% tipies
  • Spoedregulering: ± 2% with slip compensation
  • Ramp times: 0…600 s, two sets
  • Stopmodusse: Oprit, Uitrol, GS-rem, Oprit-na-Hou, S-kromme
• Insette en uitsette
  • Digitale insette: 3 fixed + 2 programmable
  • Analoog insette: 1, 0…10 V or 4…20 mA, DIP-selectable
  • Aflos uitset: 1 Vorm C, 3.0 A resistive at 30 V DC / 240 V AC
• Elektriese
  • Invoerreeks: 180…265 V AC, single-phase, 50/60 Hz
  • Invoerstroom: Die 10.0, 2.25 kVA, 15 A fuse
  • Kragdeurrit: 100 Me
  • Overcurrent limit: 200% hardware, 300% trip
  • Hitte verlies: 55 W total at rated load
• omgewing
  • Looptemperatuur: -10 ...+50 ° C for open type; +40 °C for NEMA 1
  • Storage: -40 ...+85 ° C
  • Humiditeit: 0…95% nie-kondenserend
  • skok: 15 g / 11 ms; vibration: 1 g, 5…2000 Hz
  • Geraas: 50 dBA op 1 m
  • Hoogte: 1000 m sonder ontslag
  • Keep the air free of corrosive gas, vapor, or dust
• Fisiese
  • grootte: 175.0 × × 104.8 94.0 mm algehele
  • Gewig: 1.58 kg
  • Frame: A
  • Afkoeling: fan cooled
• Network and options
  • Port: 1 × RS-485 DSI, up to 2 peripherals
  • Protokol: Modbus RTU, codes 03, 06, 16
  • nodes: 1 ... 247; speed: 1200…38400 bit/s
  • Filters: use external L type 22-RF010-AL vir CE
  • NEMA 1 kit: 22-JBAA
  • Remweerstand: 60 Ω min, AK-R2-091P500

Waar Dit Pas

• Klein vervoerbande and package handling lines
• Aanhangers en blasers in light duty rooms
• Pompe for water supply and sumps
• Mengers en roerders on small tanks
• Masjien gereedskap and simple spindle drives
• Door and gate bewegingsbeheer
• Food and packing equipment in dry areas
• heraanpassing where a plate drive drops into an old cutout

Installeer gids

• Mount the plate into the panel cutout and fix the screws.
• Hou die heatsink clear so air can flow.
• Set input voltage with the DIP-skakelaars voor aanskakeling.
• Gebruik 15 A branch fuse or a listed motor protector.
• Voeg 'n external filter when CE limits apply.
• Wire the RS-485 link with afsluitweerstande at the ends.
• Voeg 'n external brake resistor for fast stops.

Opstelling en versorging

• Die LED-sleutelbord shows faults and settings on the spot.
• Set ramp and stop mode with simple parameters.
• Gaan die fan and heatsink at each service visit.
• Clear dust from the vents to vermy oorverhitting.
• The plate design allows quick swap without rewiring the panel.

Certificaties

• cULus gelys volgens UL 508C en CSA C22.2 No. 14
• CE: EMC 2014/30/EU and LVD 2014/35/EU
• KC mark: KCC-REM-RAA-22A
• IE2 efficiency under EU 2019/1781
• Geen Veilige wringkrag af en nee seismiese rating published

Pak lys

• 22A-A4P5H204 replacement plate drive
• vaste LED-sleutelbord
• Installasie handleiding 22A-UM001L-EN-E
• Gewig: 1.58 kg

FAQ

• Q: Will this drive run a three-phase motor from a single-phase line?
  • A: Yes. It makes three-phase 0…230 V output from one-phase input.
• Q: Can I control it from a PLC over Modbus?
  • A: Yes. The DSI port speaks Modbus RTU with codes 03, 06, and 16.
• Q: Do I need a separate filter for CE?
  • A: Yes. This build has no internal filter. Add the L type unit.
• Q: From field practice, why does the drive trip on long motor cables?
  • A: Cable length adds capacitance. Keep runs short and fit a filter.
• Q: From field practice, what causes a fast stop to fault?
  • A: The brake resistor is too small or the stop time is too short.
• Q: From field practice, how do I cut RF noise in a panel?
  • A: Use shielded cable. Bond the shield at both ends to PE.