Meggitt (Vibro-Meter) 111-412-000-013-A1-B1-E010-F1-G010-H10 Proximity Measuring System

Product Overview

The 111-412-000-013-A1-B1-E010-F1-G010-H10 proximity measuring system from Meggitt (Vibro-Meter) delivers precise, stable, and non-contact vibration and position sensing for critical machinery.
It ensures reliable operation in extreme industrial environments and integrates seamlessly with VM600Mk2, VM600, and VibroSmart® monitoring systems.

Key Features & Benefits

• Non-contact eddy-current principle for precise shaft displacement and vibration measurement.
• Complies with API 670 standards for machinery protection systems.
• Frequency response: DC to 20 kHz (−3 dB) for high-speed dynamic measurement.
• Measurement range options: 2 mm or 4 mm.
• Temperature-compensated design ensures consistent performance from −40 to +180°C.
• Durable AISI 316L stainless steel housing with Torlon tip and FEP-coated cable.
• Voltage or current output with short-circuit protection.

Technical Specifications

• Manufacturer: Meggitt (Vibro-Meter)
• Model: 111-412-000-013-A1-B1-E010-F1-G010-H10
• Transducer input: High-frequency excitation from IQS900 signal conditioner
• Frequency response: DC to 20 kHz (−3 dB)
• Measurement range: 2 mm or 4 mm selectable
• Operating temperature: −40 to +180°C (drift <5%)
• Short-term survival: up to +220°C
• Protection rating: IP68 for transducer tip and integral cable
• Vibration resistance: 5 g peak (10–500 Hz)
• Shock resistance: 15 g peak (11 ms half-sine)
• Construction: Ø8 mm wire coil, Torlon tip, stainless steel body, high-temp epoxy encapsulation
• Cable type: 70 Ω FEP-insulated coaxial, Ø3.6 mm
• Weight: 0.22 kg

Suffix Breakdown (Tree Structure)

• 111-412-000-013 — Base Product Code
  • A1 — Environment: Standard
  • B1 — Body Thread: M10 × 1
  • E010 — Integral Cable Length: 1.0 m ±100 mm
  • F1 — Optional Protection: Flexible Hose
  • G010 — Flexible Hose Length: 1.0 m
  • H10 — Total System Length: 10 m

Installation Guide

• Install the probe using an M10 × 1 threaded mounting adapter aligned with the shaft axis.
• Set the probe gap based on the required measurement range before tightening.
• Route the 70 Ω FEP cable away from strong electromagnetic fields.
• Connect to the IQS900 signal conditioner and verify output polarity.
• Perform a test run across DC–20 kHz to confirm stable vibration response.

Packaging Contents

• 1 × Proximity transducer 111-412-000-013-A1-B1-E010-F1-G010-H10
• 1 × Flexible stainless steel hose, 1.0 m length
• 1 × Self-locking coaxial connector assembly with protective cap
• 1 × Installation leaflet and mounting guide
• Packed in anti-vibration foam with sealed carton box

Shipping & Delivery

• Orders are shipped via FedEx, UPS, or DHL worldwide.
• Provide complete delivery address and courier preference at checkout for faster service.

FAQ

• What measurement range does it support?
  The system supports 2 mm or 4 mm ranges depending on installation setup.
• Which conditioners are compatible?
  Use Meggitt IQS900 and VM600 series conditioners for full compatibility.
• Can the cable handle chemical exposure?
  Yes, the FEP sheath resists most industrial chemicals and moisture ingress.
• Is it suitable for high-temperature areas?
  Continuous use up to +180°C and short-term survival up to +220°C.
• Is the sensor water and dust resistant?
  Yes, the transducer head and cable are rated IP68.

Contact & Ordering

• For inquiries, contact sales@powergearx.com or WhatsApp at
  +86 18030005825.
• Specify model 111-412-000-013-A1-B1-E010-F1-G010-H10 and desired configuration when ordering.

Copyright © 2025 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/

Partner: Ubest Automation Limited