In Stock Now: Bently Nevada 330103-06-13-10-02-00 | 3300 XL 8mm Vibration Sensor

Compact 8mm Vibration Probe for Tight Spaces

This Bently Nevada 330103-06-13-10-02-00 probe combines a medium unthreaded length with a short overall case. It is an excellent choice for confined mounting locations where standard probes do not fit. Ensure precise machine monitoring.

Product Code Analysis

• Main Identifier: 330103
  • 8mm Diameter Vibration Probe
  • M10 x 1.0 Mounting Thread
  • Standard Design Without Armor
• Detailed Configuration
  • Suffix -06: 60mm of smooth, unthreaded body.
  • Suffix -13: Complete case is 130mm long.
  • Suffix -10: Comes with a 1.0 meter attached cable.
  • Suffix -02: Standard ClickLoc connector and cable.
  • Suffix -00: Basic model, no hazardous area certifications.

Critical Performance Details

• Operational Data
  • Measurement Window: Accurately senses from 0.25 mm to 2.3 mm.
  • Setup Voltage: Target -9 Vdc output, equaling a 1.27 mm air gap.
  • Electrical Characteristic: 7.59 Ω internal resistance (±0.50 Ω).
• Construction & Limits
  • Body: Corrosion-resistant 303/304 stainless steel.
  • Tip: Non-magnetic PPS for accurate sensing.
  • Sealing: Reliable Viton® O-ring excludes contaminants.
  • Temperature Range: Full operation from -52°C to +177°C.
  • Important: Do not expose to temperatures below -34°C.
• Integration Notes
  • Installation: Use M10x1 thread. Maximum safe thread-in depth is 15 mm.
  • Wiring: Supports up to 305 meters of field cable to the monitor.

Expert Answers to Common Questions

Understanding This Configuration

• Q: The “-06” and “-13” options seem specific. What’s the use case?
• A: This 60mm unthreaded / 130mm overall combo is perfect for mounts requiring a nut or spacer. It gives flexibility while keeping the probe short for tight clearance.
• Q: Is the standard cable oil-resistant?
• A: No. The “-02” suffix indicates a standard PVC jacket. For oily or wet environments, select the -12 option with FluidLoc cable.

Installation & Calibration

• Q: How do I physically set the 1.27 mm gap during installation?
• A: Use a feeler gauge or a mil gauge between the probe tip and the shaft. Adjust the probe position until you measure the correct gap.
• Q: Can this probe measure axial thrust position?
• A: Yes. This probe can measure axial position when mounted correctly. The setup gap and calibration will be different than for vibration.

Ordering & Service

• Q: What if I receive a damaged unit?
• A: Inspect your package upon delivery. Report any shipping damage immediately. We will resolve the issue promptly under our warranty.

Simple & Secure Ordering

• Available Now: The 330103-06-13-10-02-00 is in stock for quick delivery.
• Fast Shipping Options: We ship worldwide using reliable carriers like FedEx, UPS, and DHL.
• Your Assurance: Every sensor is backed by a comprehensive 12-month warranty.

We’re Here to Help

Unsure if this is the exact probe for your machine?

Contact our technical sales team for free guidance:

• Email us at: sales@powergearx.com
• Message on WhatsApp: +86 18030005825

Copyright © 2025 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/

Partner: PLCDCS HUB Limited