Product details
Armored Proximity Probe for High-Impact Areas
This Bently Nevada probe combines sensor precision with physical armor. The stainless steel armor protects the cable from abrasion and crush damage. It features a 0.5m cable with a guarded ClickLoc connector. The probe carries multiple international approvals. It is the ideal choice for tough environments like compressors, turbines, and heavy machinery.
Product Specifications & Data
- Part Number: Bently Nevada 330904-09-17-05-01-05
- Series & Type: 3300 NSv Proximity Probe with Armor
- Mounting Thread: M8 x 1.0 Metric
- Unthreaded Section: 90 mm Length
- Overall Case Length: 170 mm
- Cable Length (Armored): 0.5 Meter (20 Inches)
- Connector: ClickLoc with Protective Cap
- Agency Approvals: Multiple International Certifications
- Probe DC Resistance: 4.0 Ω ± 0.5 Ω
- Linear Measurement Range: 1.5 mm (60 mils)
- Optimal Installation Gap: 1.0 mm (40 mils) from target
- Sensitivity (Output): 7.87 Volts per mm (200 mV/mil)
- High Accuracy Linearity: ±0.06 mm max deviation
- Frequency Response: 0 to 10,000 Hz
- Target Diameter: Minimum 13 mm recommended
- Probe Tip: Chemical-Resistant PPS Plastic
- Case & Armor Material: AISI 304 Stainless Steel
- Cable Insulation: FEP, 75 Ohm Coaxial
- Operating Temperature Range: -52°C to +177°C
- Installation Torque (Probe): Finger tight to 0.56 N·m max
- Installation Torque (Case): 5.1 N·m recommended
- Minimum Bend Radius: 25.4 mm (1.0 inch)
Key Features & Benefits
- Stainless Steel Armor: Provides superior protection for the cable against crushing, abrasion, and accidental impact.
- Multi-Agency Approved: Carries multiple international safety and performance certifications for global project use.
- Enhanced Durability: Armored design extends probe life in high-vibration and high-traffic plant areas.
- Process-Ready: PPS tip and Viton seal offer excellent resistance to oils, fuels, and process chemicals.
- Protected Connection: Connector protector ensures electrical integrity during shipping and before installation.
Installation & Selection FAQs
What is the main advantage of the armored version?
The flexible stainless steel braid (armor) protects the cable from physical damage. This is critical where cables are exposed to moving parts, tools, or foot traffic.
What do “Multiple Approvals” typically include?
This often refers to certifications like ATEX, IECEx, or other regional standards for use in hazardous locations, making it suitable for regulated industries worldwide.
When should I choose an armored probe over a standard one?
Choose armor when the cable run is exposed to potential mechanical damage, such as near walkways, service areas, or in machinery with moving components.
Is the armored section flexible?
Yes, the stainless steel armor is flexible for routing but has a minimum bend radius of 1.0 inch (25.4 mm). Avoid sharp bends to prevent damage.
From a maintenance view, are armored probes harder to install?
Installation is similar. The armor adds weight and stiffness, so providing proper support along the cable run is important to prevent stress on the probe body.
Shipping & Warranty Information
This is a brand new, factory-sealed unit with a 12-month manufacturer warranty. We ship globally using express services: FedEx, UPS, and DHL.
To confirm stock or discuss your application:
Please contact our sales department:
Email: sales@powergearx.com
WhatsApp: +86 18030005825
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
Partner: PLCDCS HUB Limited https://plcdcshub.com/
There are no reviews yet.