Bently Nevada 330701-00-25-10-11-05 11 mm Probe Sensor | Industrial Monitoring

Product Summary — Bently Nevada 330701-00-25-10-11-05

The 330701-00-25-10-11-05 probe from Bently Nevada delivers reliable 11 mm sensing for rotating machines.
It uses a PPS tip, strong stainless steel case, and a FluidLoc cable that resists heat and oil.
This probe works well in harsh plants and maintains stable readings.
For any inquiry, contact sales@powergearx.com or +86 18030005825.

Key Points

• 11 mm sensing design with 1/2-20 UNF thread.
• FEP-insulated triaxial cable for clean signals.
• PPS probe tip offers strong thermal endurance.
• Rated for tough environments from -51°C to +177°C.
• Shipped via FedEx, UPS, or DHL.
• Includes 12-month warranty.

Suffix Breakdown — 330701-00-25-10-11-05

• Base Code 330701: 3300 XL 11 mm probe.
• 00: 0.0 in unthreaded section.
• 25: 2.5 in case length.
• 10: 1.0 m total cable length.
• 11: ClickLoc connector + protector, FluidLoc FEP cable.
• 05: Multi-approval option.

Mechanical Data

• Thread size: 1/2-20 UNF.
• Max thread depth: 0.750 in.
• Probe weight: 0.17 kg.
• Tip material: PPS high-heat polymer.
• Case material: AISI 304 stainless steel.
• Min bend radius: 1.0 in (25.4 mm).
• Recommended case torque: 15.2 N·m.
• Max allowable torque: 45.2 N·m.

Electrical Data

• Cable type: 75-ohm triaxial, FEP insulated.
• Probe lengths supported: 1 m, 5 m, 9 m.
• Probe resistance (1 m): 5.9 ± 0.5 Ω.
• Connector torque: finger-tight recommended.
• Max connector torque: 0.565 N·m.

Thermal & Environmental

• Operating temperature: -51°C to +177°C.
• Storage temperature: same as operating range.
• Avoid temperatures below -34°C to protect the Viton seal.
• FEP cable resists chemicals and high heat.

Pressure Seal Notes

• Uses a Viton O-ring to hold differential pressure.
• Ideal for sealed housings and hazardous areas.
• Not pressure-tested by default; testing available on request.

What You Receive

• One 330701-00-25-10-11-05 11 mm probe.
• Factory PPS tip and Viton seal.
• FluidLoc FEP probe cable.
• Basic install sheet.
• Shipment via FedEx / UPS / DHL.

Install Tips

• Keep the bend radius above 25.4 mm to protect the cable.
• Tighten the case to 15.2 N·m for best seating.
• Use clean grounding to avoid signal noise.
• Check cable resistance before linking to the proximitor.

Five Professional FAQs

• Q: How do I keep signal noise low?
  A: Route the FEP cable away from strong power lines and keep bends smooth.
• Q: What torque gives best long-term seating?
  A: Use 15.2 N·m and verify engagement depth stays within 0.750 in.
• Q: How do I confirm correct probe range?
  A: Check DC resistance first, then test gap output from the proximitor.
• Q: How should I store the probe?
  A: Keep it in a dry area above -34°C to protect the O-ring.
• Q: When should I choose FluidLoc cable?
  A: Use it when oil, heat, or vibration may damage general cable types.

Contact

• Email: sales@powergearx.com
• WhatsApp: +86 18030005825

Original Source: https://www.powergearx.com/

Partners: Ubest Automation Limited

Copyright © 2025 Powergear X Automation Limited. All rights reserved.