Bently Nevada 330104-01-09-10-12-05 Industrial 3300 XL Proximity Probe

Overview

Bently Nevada builds the 330104-01-09-10-12-05 3300 XL 8 mm proximity probe for precise shaft position and vibration measurement. The probe uses a PPS tip, stainless steel case, and an armored FluidLoc cable with ClickLoc connector for strong signal stability in industrial applications.

Technical Parameters

• Brand: Bently Nevada, Model: 330104-01-09-10-12-05, Series: 3300 XL.
• Probe Type: 8 mm proximity probe with M10 × 1 thread and integrated armor.
• Nominal DC Resistance: RPROBE = 7.59 ± 0.50 Ω for 1.0 m probe.
• Power Range: Operates from -17.5 Vdc to -26 Vdc at 12 mA maximum.
• Output Load: Designed for 10 kΩ load and 50 Ω output resistance.
• Calibration: Tested with AISI 4140 target, 1.27 mm gap, -24 Vdc supply.
• Temperature Range: -55°C to +232°C based on T-class requirements.
• Construction: PPS probe tip, AISI 303/304 stainless steel case.
• Connector & Cable: ClickLoc miniature coaxial connector with FluidLoc sealed cable.

Performance Characteristics

• Linearity: Provides stable linearity across the calibrated measurement gap.
• Resolution: Supports high-resolution shaft vibration and displacement monitoring.
• Noise Immunity: ClickLoc and FluidLoc design reduces electrical interference.
• Environmental: Rated for operation up to 2000 meters altitude with stable performance.

Installation Guide

• Install using the M10 × 1 threaded case and adjust for a 1.27 mm nominal gap.
• Route the FluidLoc cable away from power lines to reduce interference.
• Use -23.5 Vdc for the best linear measurement range.
• Check probe resistance to confirm proper cable and connector integrity.

Packing List

• One 330104-01-09-10-12-05 8 mm proximity probe with 1.0 m FluidLoc cable.
• M10 × 1 threaded stainless-steel case with Viton sealing O-ring.
• Quick installation sheet with reference drawing numbers.
• Packaging prepared for FedEx, UPS, or DHL shipment.

Certifications & Hazardous Area Use

• Approvals: CSA, ATEX, IECEx supported when installed per listed drawings.
• Zone/Class Use: Approved for Class I, II, III Zones and Divisions based on circuit type.
• Intrinsic Safety: Compatible with zener barriers or galvanic isolators as required.

FAQ

• Q: What mounting thread does the probe use?
  A: It uses an M10 × 1 thread suitable for standard housings.
• Q: How do I confirm the resistance value?
  A: Measure between the center and outer conductors to verify RPROBE near 7.59 Ω.
• Q: Can I use this probe in high-temperature points?
  A: Yes, confirm the T-class limit before operation in hot zones.
• Q: What shipping options are available?
  A: We offer DHL, UPS, and FedEx with international tracking.
• Q: What is the supplied cable length?
  A: The model includes a factory 1.0 m FluidLoc cable.

Contact & Ordering

• Email us at sales@powergearx.com for availability and pricing.
• Message or call us via WhatsApp: +86 18030005825.
• Provide the model 330104-01-09-10-12-05 when requesting a quotation.

Copyright © 2025 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/