Product details
Product Overview — Bently Nevada 330103-02-08-10-02-00
The Bently Nevada 330103-02-08-10-02-00 3300 XL proximity probe delivers precise shaft displacement data for rotating assets.
It fits metric M10×1 mounting and supports stable readings with an 8 mm sensing tip.
You install this probe easily and route signals using the miniature ClickLoc connector.
Executive Pyramid — Key Information
- Core Highlights
- Brand & Model: Bently Nevada 330103-02-08-10-02-00, part of the 3300 XL metric series.
- Function: Accurate radial vibration and shaft displacement monitoring.
- Performance Facts
- Linear Range: 0.25 mm to 2.3 mm for stable displacement readings.
- Gap Setting: -9 Vdc equals approx. 1.27 mm for radial vibration measurement.
- Mechanical & Materials
- Thread Size: M10×1 with 15 mm engagement depth.
- Tip Material: Polyphenylene sulfide (PPS); Case: AISI 303/304 stainless steel.
- Wiring & Connectivity
- Cable & Connector: 1.0 m cable with miniature coaxial ClickLoc connector.
- Field Wiring: Use shielded triad; maximum 305 m to the proximitor.
Technical Specifications — With Brand & Model
- Manufacturer: Bently Nevada / Model: 330103-02-08-10-02-00.
- Probe Type: Metric 8 mm design, M10×1 thread, unarmored version.
- Cable Length: 1.0 meter factory cable.
- Connector Type: Miniature coaxial ClickLoc design.
- Resistance: RPROBE = 7.59 ± 0.50 Ω for 1.0 m probe.
- Linear Range: 0.25 mm to 2.3 mm stable measurement window.
- Recommended Gap: -9 Vdc equals approx. 1.27 mm.
- Case Length: 80 mm; Unthreaded Length: 20 mm.
- Weight: 323 g/m (11.4 oz/m).
- Standard Temperature: -52°C to +177°C operation and storage.
- Extended Temperature: Tip to +218°C; cable + connector to +260°C.
- Humidity Performance: Less than 3% ASF shift at 93% RH.
- Pressure Seal: Viton® O-ring prevents differential pressure leakage.
- Safe Area Options: Compatible with zener barriers or galvanic isolators.
Suffix Tree — Decode 330103-02-08-10-02-00
- Base Code: 330103 — 3300 XL 8 mm metric probe.
- Option Tree:
- 02: 20 mm unthreaded section.
- 08: 80 mm case length.
- 10: 1.0 m total probe length.
- 02: Miniature ClickLoc standard cable assembly.
- 00: No special agency approval.
Installation Guide
- Insert the probe into the M10×1 port and tighten to 15 mm thread depth.
- Set the measurement gap close to 1.27 mm for radial vibration checks.
- Use shielded triad wiring and keep cable runs under 305 meters.
- Lock the miniature ClickLoc connector until it clicks firmly.
- Verify resistance near 7.59 Ω before operation.
Packaging Contents
- One Bently Nevada 330103-02-08-10-02-00 proximity probe.
- Factory-installed PPS tip and sealed Viton® O-ring.
- Simple wiring reference sheet.
- Shipment by FedEx, UPS, or DHL.
Environmental Notes
- Operate within rated temperatures for consistent signal quality.
- Avoid temperatures under -34°C to protect the pressure seal.
- Use extended-temperature options only when required by your application.
- Adopt approved isolation barriers for hazardous installations.
FAQ
- Q: How should I choose the best gap for balancing accuracy?
A: Set the gap near 1.27 mm and adjust gradually while monitoring vibration shifts. - Q: How does long wiring influence readings?
A: Keep wiring under 305 meters to reduce high-frequency rolloff. - Q: When should I use the extended temperature option?
A: Use it only when tip or cable temperatures consistently exceed standard limits. - Q: What is the fastest method to confirm correct installation?
A: Measure DC resistance and check output stability on the proximitor. - Q: Which worldwide services handle shipment?
A: FedEx, UPS, and DHL deliver globally with tracking support.
Contact & Ordering
- Email: sales@powergearx.com
- WhatsApp: +86 18030005825
- Please share application details for optimized configuration advice.
Original Source: https://www.powergearx.com/
Partners: Ubest Automation Limited
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
There are no reviews yet.