Bently Nevada 330101-00-47-10-02-00 8 mm Probe — Rugged 3/8-24 UNF Shaft Sensor

Product Snapshot — Bently Nevada 330101-00-47-10-02-00

The Bently Nevada 330101-00-47-10-02-00 3300 XL probe offers rugged 8 mm sensing for rotating machines.
It fits a 3/8-24 UNF thread and ships with a 1.0 m ClickLoc cable.
The probe uses TipLoc and CableLoc patents for stronger tip and cable bonds.

Why Choose This Probe

• Robust PPS tip protects the sensing coil from mechanical damage.
• Thicker 8 mm body improves resistance to physical abuse.
• CableLoc gives 330 N pull strength for secure cable attachment.
• Optional FluidLoc prevents fluid leak paths through the cable core.
• Simple thread fit and ClickLoc connector speed field installs.
• 12-month warranty included for peace of mind.

Suffix Tree — Decode 330101-00-47-10-02-00

• 330101: 3300 XL 8 mm probe, 3/8-24 UNF thread.
• 00: 0.0 in unthreaded section.
• 47: 4.71 in overall case length.
• 10: 1.0 m total cable length.
• 02: Miniature coaxial ClickLoc connector, standard cable.
• 00: No special agency approvals in this part code.

Key Technical Data

• Manufacturer: Bently Nevada. Model: 330101-00-47-10-02-00.
• Diameter: 8 mm sensing tip with thicker PPS molding.
• Thread: 3/8-24 UNF. Max engagement defined per mount.
• Total length: 1.0 m standard factory cable.
• Nominal DC resistance (1 m): 7.59 ± 0.50 Ω.
• Extension cable capacitance: 69.9 pF/m typical.
• Linear range: 0.25 mm to 2.3 mm (10 to 90 mils).
• Recommended gap: -9 Vdc ≈ 1.27 mm radial setting.
• Incremental Scale Factor: 7.87 V/mm (±5% for 5/1 m systems).
• DSL (Deviation from straight line): < 0.025 mm for 5/1 m systems.
• Field wiring: 0.2–1.5 mm² (16–24 AWG). Max run: 305 m to monitor.
• Weight: 323 g/m (11.4 oz per meter).

Electrical & Signal Notes

• Use three-conductor shielded triad cable to reduce noise.
• Long runs increase high-frequency rolloff; limit to 305 m.
• Verify probe RPROBE after install to confirm cable integrity.
• Use proper grounding and routing to avoid EMI coupling.

Mechanical & Installation

• Mount into a clean 3/8-24 UNF socket. Tighten to fit.
• Keep the probe axis aligned to avoid transverse loading.
• Protect the ClickLoc connector with the supplied protector.
• Maintain smooth cable bends above 25.4 mm radius where possible.

Thermal & Environmental Range

• Operating and storage temperature: -52°C to +177°C.
• Extended tip rating: up to +218°C when specified.
• Extended cable/connector rating: up to +260°C where needed.
• Avoid exposure below -34°C to protect the Viton seal.
• Humidity stability: < 3% ASF change after 56 days at 93% RH.

Pressure Seal & Reliability

• Viton O-ring seals the space between tip and case.
• Probes ship untested for pressure. Contact us for test needs.
• TipLoc molding improves tip-to-body bond and long-term life.

Additional Performance Numbers

• Pull strength (CableLoc): 330 N typical.
• Extension cable options: standard and optional FluidLoc cable.
• Capacitance effect: expect small signal rolloff above 10 kHz on long runs.
• Recommended monitoring gap yields best linearity across the 80 mil range.

What Ships With Your Probe

• One Bently Nevada 330101-00-47-10-02-00 3300 XL 8 mm probe.
• Standard ClickLoc cable and connector protector.
• Installation leaflet and basic wiring diagram.
• Packed for FedEx, UPS, or DHL shipping.
• 12-month warranty covers defects and workmanship.

Product Selling Points

• TipLoc and CableLoc increase ruggedness and cable retention.
• 8 mm tip gives stronger coil protection than smaller probes.
• ClickLoc connector eases field connection and reduces install time.
• High linearity and low DSL deliver repeatable measurements.
• Optional FluidLoc stops fluid migration along the cable core.

Five Expert FAQs

• Q: How do I prevent cable wear near the machine entry?
  A: Add a short protective sleeve and keep the bend radius above one inch. Check the cable after heavy handling.
• Q: How do I test the TipLoc bond after installation?
  A: Visually inspect the tip seating and perform a gentle pull test on the cable. Listen for looseness or shifts in output.
• Q: When do I choose FluidLoc cable over standard cable?
  A: Choose FluidLoc when oil or coolant contact could travel through cable cores. Use it for sealed machine gearboxes.
• Q: What check confirms correct linearity in the field?
  A: Sweep the gap across the 10 to 90 mil range. Verify ISF near 7.87 V/mm and small DSL values.
• Q: How to reduce measurement drift in hot machines?
  A: Use extended temperature cable options and allow the probe to reach stable operating temperature before collecting baselines.

Contact & Orders

• Email: sales@powergearx.com
• WhatsApp: +86 18030005825

Original Source: https://www.powergearx.com/

Partners: Ubest Automation Limited

Copyright © 2025 Powergear X Automation Limited. All rights reserved.