Allen-Bradley 150-F108NCD SMC-Flex Smart Motor Controller | Drives

Introduction: Advanced Smart Motor Control

The Allen-Bradley 150-F108NCD is a premier smart motor controller. It belongs to the trusted SMC-Flex controller series for industry. This solid-state unit delivers precise microprocessor-based motor management. Powergear X Automation supplies this controller for robust automation solutions. It excels in starting and protecting three-phase induction motors reliably.

Core Technical Specifications

• Brand: Allen-Bradley / Rockwell Automation
• Model: 150-F108NCD
• Series: SMC-Flex Smart Motor Controller
• Enclosure: Open Type for panel mounting
• Controller Rating: 108 Amps, 75 HP at 460V AC
• Input Voltage: 200-575V AC, 3-Phase, 50/60 Hz
• Control Voltage: 100-240V AC
• Rated Voltage: 500/575V AC

Electrical Durability & Ratings

• Dielectric Withstand: 2,200V AC for the main power circuit.
• Short-Circuit Withstand: A high 30kA maximum rating.
• Voltage Spike Protection: Integrated RC network for dv/dt.
• Power Tolerance: Stable operation from -15% to +10% variance.
• Two programmable relays signal operational status clearly.

Communication & Operational Interface

• A built-in DPI port allows for seamless network communication.
• This interface supports add-on modules for various protocols.
• Clear LED indicators provide instant controller status feedback.
• You can easily integrate it into modern control architectures.

Environmental Specifications & Robustness

• Operating Temperature: 23°F to 122°F (-5°C to 50°C).
• Storage Temperature: 23°F to 104°F (-5°C to 40°C).
• Humidity: 5% to 95% relative humidity, non-condensing.
• Vibration Resistance: Withstands 1G peak vibration.
• Shock Resistance: Survives 15G operational shock for 11ms.
• Installation Altitude: No de-rating needed up to 2000 meters.

Installation Guidelines

• Install the open controller inside a suitable industrial enclosure.
• Always follow local electrical codes during wiring and setup.
• Confirm your supply voltage matches the 200-575V AC input range.
• Ensure proper spacing around the unit for adequate cooling.
• Connect control power within the 100-240V AC specified range.

Packaging & Delivery Information

• One (1) Allen-Bradley 150-F108NCD controller unit.
• All necessary mounting hardware and installation guides.
• Comprehensive user manual and technical documentation.
• We ship globally via FedEx, UPS, and DHL carrier services.

Frequently Asked Questions (FAQ)

• What motors is the 150-F108NCD designed for?
• This controller manages three-phase AC induction motors effectively.
• Can it communicate with a PLC system directly?
• Yes, use the DPI port with a communication module for PLC networks.
• How does it protect a motor from burning out?
• Its I2T overload model closely mimics the motor’s thermal response.
• Is this unit suitable for a harsh, dusty environment?
• You must install it in a properly rated enclosure for such conditions.
• What happens if the input power phase sequence is wrong?
• The phase reversal protection feature will activate and prevent start.

For quotes or technical support on the 150-F108NCD, contact us. Email sales@powergearx.com or message on WhatsApp at +86 18030005825.
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
Partners: Ubest Automation Limited | PLCDCS HUB Limited