Product details
Product Brief
Meet the Bently Nevada 330707-00-15-90-02-00. This is a heavy-duty 11mm proximity probe from the trusted 3300 XL series. It is made in the USA for precise vibration and position monitoring on large industrial machinery. Its 9-meter cable allows flexible installation over long distances. The robust design ensures reliability in demanding plant conditions. It is the ideal choice for critical rotating equipment.
Model Code Breakdown
- 330707: 3300 XL 11 mm Probe, 5/8-18 UNF Thread
- 00: Unthreaded Length (0 inches)
- 15: Overall Case Length (1.5 inches)
- 90: Total Cable Length (9.0 meters / 29.5 feet)
- 02: Miniature coaxial ClickLoc Connector
- 00: Agency Approval Not Required
Complete Technical Data
- Brand & Series: Bently Nevada 3300 XL
- Probe Type: 11mm Diameter, Non-Armored, Proximity
- Electrical Specifications
- Probe Resistance (9m): 8.5 Ω ± 1.1 Ω
- Cable Type: 75 Ω Triaxial, FEP Insulated
- Connector: ClickLoc, Miniature Coaxial
- Mechanical Specifications
- Mounting Thread: 5/8-18 UNF
- Max Thread Engagement: 0.938 in (23.8 mm)
- Case Material: AISI 304 Stainless Steel
- Tip Material: PPS Plastic (Polyphenylene Sulfide)
- Case Torque (Rec.): 15.2 N•m (133 in•lb)
- Connector Torque: Finger tight (Max 0.565 N•m)
- Min. Bend Radius: 25.4 mm (1.0 in)
- Shipping Weight: 0.17 kg
- Environmental Ratings
- Operating Temperature: -51°C to +177°C
- Pressure Seal: Viton O-ring (Differential)
- Note: Avoid sustained exposure below -34°C to protect seal.
Installation & Handling Guide
Mount the probe using the 5/8-18 UNF thread. Ensure full thread engagement up to 0.938 inches. Tighten to the recommended 15.2 N•m torque. Connect the cable using the ClickLoc connector—finger tight is sufficient. Avoid bending the cable tighter than a 1-inch radius. Route the long 9-meter cable securely away from heat sources and moving parts.
Warranty & Shipping
- Warranty: 12-month manufacturer warranty on defects.
- Shipping: Global express delivery via FedEx, UPS, and DHL.
- Condition: 100% New, Original, in Factory Sealed Packing.
Frequently Asked Questions
What are the main uses for an 11mm probe versus an 8mm?
The 11mm probe is physically stronger. Use it on larger machinery where space allows and where extra ruggedness is needed to resist knocks or stress.
Can I shorten the 9-meter cable if it’s too long?
No. The probe length is factory-set. Cutting the cable will change its electrical properties and ruin the probe. Always order the correct length.
Why is there a minimum bend radius for the cable?
Bending the cable too sharply can damage the internal wires and shield. This can cause signal noise or complete failure. Always maintain a gentle bend.
What does “triaxial” cable mean for performance?
Triaxial cable has an extra shield layer compared to standard coaxial. This provides superior protection against electrical interference, which is vital for clean signals over long 9-meter runs.
My environment has rapid temperature swings. Is this a problem?
The probe handles the range well. However, ensure the cable is not repeatedly flexed between hot and cold zones, as this can fatigue the materials over time.
Expert Selection Advice
Choose this 330707 model when you need a long cable and maximum physical strength. Confirm your mounting hole is threaded 5/8-18 UNF. For applications with extreme side-load or cable abuse, consider an armored version. If your distance is shorter, a 1m or 5m probe may be more cost-effective and easier to manage.
For Inquiries: Email sales@powergearx.com or call +86 18030005825 (WhatsApp).
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
Partner: Ubest Automation Limited https://www.ubestplc.com/
There are no reviews yet.