200350 Accelerometer 200350-01-00-00 | Bently Nevada

Bently Nevada 200350-01-00-00 Accelerometer

Overview

This Bently Nevada accelerometer helps monitor machine vibration. It is designed for use in rough industrial sites. It detects small vibration changes to avoid big damage. Made in the USA. Certificate of Origin available upon request.

Key Technical Specs

• Measurement Range: ±50g
• Sensitivity: 100 mV/g ±20%
• Output Bias Voltage: 8 to 12 VDC
• Excitation Voltage: 18 to 28 VDC
• Excitation Current: 2 to 20 mA
• Output Impedance: less than 150 ohms
• Noise Level: 350 µg (1-10kHz)
• Amplitude Linearity: ±1%
• Transverse Sensitivity: ≤7%

Performance

• Frequency Range: 30 to 600000 cpm (0.5 to 10000 Hz)
• Mounted Resonant Frequency: 25 kHz
• Discharge Time Constant: ≥0.3 sec
• Settling Time: 2.0 sec
• Electrical Isolation: >10⁸ ohms

Environmental Limits

• Temperature Range: -54°C to +121°C
• Shock Limit: 5000 g peak
• Humidity: 100%, condensing (not submerged)
• Enclosure Protection: IP68

Mounting Guide

• Mounting Thread: 1/4-28 Female
• Mounting Stud: 01 = 1/4-28 to M6 x 1.00 Stainless Steel
• Torque Range: 2 to 5 ft-lb (2.7 to 6.8 N·m)

Electrical Connection

• Connector Type: 2-Pin Mil-C-5015
• Position: Top Exit

Sensing Info

• Element Type: Ceramic
• Geometry: Shear Mode

Model Tree Explanation

• 200350 = Accelerometer Series
• 01 = 1/4-28 to M6 Stainless Mounting Stud
• 00 = Tolerance 100 mV/g ±20%
• 00 = No Agency Approvals

Package Contents

• 1 x Bently Nevada 200350-01-00-00 Sensor
• 1 x Stainless Mounting Stud
• No calibration certificate included

Shipping Methods

• FedEx
• UPS
• DHL