Product details
Bently Nevada Compact Probe with Medium Cable
Space-saving 3300 XL 8mm Proximity Probe designed for limited clearance. Model 330103-00-06-15-02-CN features a 60mm case with a useful 1.5-meter cable. Configured for country-specific regulatory compliance.
Part Number Structure Explained
- 330103 – Core Probe: 8mm, M10x1, No Armor
- 00 – Unthreaded Section: 0mm (Fully Threaded)
- 06 – Overall Case Length: 60mm
- 15 – Attached Cable: 1.5 meters (4.9 feet)
- 02 – Connection: Mini ClickLoc Connector
- CN – Agency Status: Country Specific Approvals
Primary Technical Data
- Manufacturer: Bently Nevada
- Product Family: 3300 XL Vibration System
- Complete Part No.: 330103-00-06-15-02-CN
- Sensor Type: 8mm Proximity / Eddy Current
- Linear Range: 0.25 mm to 2.3 mm
- Optimal Gap Setting: 1.27 mm (50 mils)
- Electrical Resistance: 7.73 Ω ± 0.50
- Case Construction: SST (303/304)
- Tip Construction: PPS Polymer
- Internal Seal: Viton O-Ring
- Operating Temperature: -52°C to +177°C
Physical Installation Guide
- Mounting Thread: M10 x 1.0 Metric
- Maximum Engagement: Do Not Exceed 15 mm
- Recommended Torque: 11.2 N•m
- Care for First Threads: Tighten to 7.5 N•m Initially
- Humidity Tolerance: Minimal Effect at 93% RH
Hazardous Area Compliance
- Compliance Type: Country Specific (CN)
- Intrinsic Safety (ia): Suitable for Zone 0
- Non-Incendive (nA/ec): Suitable for Zone 2
- Applicable Groups: A, B, C, D, E, F, G
Ordering & Shipping Details
- One Factory New 3300 XL 8mm Proximity Probe
- Related Technical Documentation
- Full 12-Month Warranty
- Express Delivery: Via FedEx, UPS, or DHL
- Customer Service: Ready to Assist
Frequently Asked Questions
What applications need a 60mm case with a 1.5m cable?
This combination is perfect for tight spaces where the probe mounts close to a junction box. Common on small motors, auxiliary equipment, or retrofit installations with limited routing space.
How does the resistance change with 1.5m vs. 0.5m cable?
Resistance increases slightly with cable length. This model’s 7.73 Ω (for 1.5m) differs from the 7.45 Ω of a 0.5m model. The monitoring system compensates for this calibrated value.
What should I check regarding “Country Specific” approvals?
Confirm the exact certification standard required for your project location (e.g., INMETRO for Brazil, KCs for Korea). We can verify if this CN-configured probe meets that need.
Can I cut and re-terminate the 1.5m cable if it’s too long?
No. Cutting the factory-terminated cable voids the warranty and alters the electrical calibration. Always select the correct cable length for your application.
Why is a fully threaded (0mm unthreaded) case beneficial?
It allows for fine adjustment of the probe’s insertion depth. You can thread it in or out slightly to achieve the perfect 1.27 mm gap without an unthreaded section limiting movement.
Need help matching this probe to your country’s standards? Reach out: sales@powergearx.com or +86 18030005825.
Global Compliance Partner: Oiltech Controls Limited
Integration Partner: PLCDCS HUB Limited
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
There are no reviews yet.